• Advances in aircraft and spacecraft science
• /
• v.9 no.1
• /
• pp.69-93
• /
• 2022

Reduced graphene oxide (rGO) is one of the derivatives of graphene, which has drawn some experimental research interests in recent years however, numerical research studying the mechanical behaviors of composites made of rGO has not been taken into consideration yet. The objective of this research is to investigate the buckling, and free vibration of functionally graded reduced graphene oxide reinforced nanocomposite (FG rGORC) plates employing isogeometric analysis (IGA). The effective Young's modulus of rGORC is determined based onthe Halpin-Tsai model. Four different FG distribution types of rGO are considered varying across plate thickness. Besides, the refined plate theory is used based on Reddy's third-order function. To capture the size effect, modified couple stress theory (MCST) is employed. A comprehensive study is provided examining the effect of various parameters including rGO weight fraction, FG distribution types, boundary conditions, material length scale parameter, etc. Our obtained results show that the addition of only 1% of uniformly distributed rGO into epoxy plates leads to the fundamental frequency and critical buckling load 18% and 39% higher than those of pure epoxy plates, respectively.

• Computers and Concrete
• /
• v.21 no.3
• /
• pp.261-267
• /
• 2018

This paper discusses a study of cement mortar reinforced with Graphene Oxide (GO) flakes carried out at the University of Plymouth. Over 60 specimens were prepared and tested to obtain the tensile, compressive and flexural strengths of cement mortar with/without 0.5% GO flakes by weight of cement. The dispersion of the GO flakes and the effect of the use of polycarboxylate ether superplasticizer (0.2% by weight of cement) on the material strength are discussed. Images of the particle sizes of GO are presented from the transmission electron microscopy analysis. In addition, the images from the field emission scanning electron microscope analysis are also presented to show the difference of the microscopic structure of cement mortar with/without GO. The results of the strength tests are presented. It is shown that the inclusion of the GO flakes in general led to positive results, which suggest that GO improved the tensile, compressive and flexural strengths of cement mortar.

• Genes and Genomics
• /
• v.40 no.12
• /
• pp.1331-1338
• /
• 2018

Although there have been plenty of dominance deviation analysis, few studies have dealt with multiple phenotypes. Because researchers focused on multiple phenotypes (final weight and backfat thickness) of Landrace pigs, the classification of the genes was possible. With genome-wide association studies (GWASs), we analyzed the additive and dominance effects of the single nucleotide polymorphisms (SNPs). The classification of the pig genes into four categories (overdominance in final weight, overdominance in backfat thickness and overdominance in final weight, underdominance in backfat thickness, etc.) can enable us not only to analyze each phenotype's dominant effects, but also to illustrate the gene ontology (GO) analysis with different aspects. We aimed to determine the additive and dominant effect in backfat thickness and final weight and performed GO analysis. Using additive model and dominance deviation analysis in GWASs, Landrace pigs' overdominant and underdominant SNP effects in final weight and backfat thickness were surveyed. Then through GO analysis, we investigated the genes that were classified in the GWASs. The major GO terms of the underdominant effects in final weight and overdominant effects in backfat thickness were ion transport with the SLC8A3, KCNJ16, P2RX7 and TRPC3 genes. Interestingly, the major GO terms in the underdominant effects in the final weight and the underdominant effects in the backfat thickness were the regulation of ion transport with the STAC, GCK, TRPC6, UBASH3B, CAMK2D, CACNG4 and SCN4B genes. These results demonstrate that ion transport and ion transport regulation genes have distinct dominant effects. Through GWASs using the mode of linear additive model and dominance deviation, overdominant effects and underdominant effects in backfat thickness was contrary to each other in GO terms (ion transport and ion transport regulation, respectively). Additionally, because ion transport and ion transport regulation genes are associative with adipose tissue accumulation, we could infer that these two groups of genes had to do with unique fat accumulation mechanisms in Landrace pigs.

• Information Systems Review
• /
• v.9 no.1
• /
• pp.139-160
• /
• 2007

Our study focuses on empirical findings of the critical factors which influence the performance of ERP system in business. The study is mainly interested in examining the influence of the characteristics of late process of adopting ERP called "Go-Live" phase with the critical issues like customizing, transformational process of standardization, phased implementation, concurrent operation and use with the current systems on users' ERP satisfaction. The analyses of the data conducted thru moderated regression analysis and subgroup analysis. Using moderated regression analysis, we first examined the effect of moderator variables like customizing, process standardization, sequential use, concurrent use with the current systems. And then, using subgroup analysis is to verify directions of the moderator effects. Having knowledge on the characteristics of ERP Go-Live process can lead to success of ERP system in business. Our results can be beneficial to those organizations who want to adopt and maintain ERP system effectively.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.38
• /
• pp.49.1-49.9
• /
• 2016

Background: The aim of this report is to present a new reference for aesthetic mandible surgery using three-dimensional cone-beam computed tomography-based treatment planning for orthognathic surgery which can be implemented in surgical planning and perioperative procedure. Methods: To make an objective standard for evaluating aesthetic mandibular outline, we make an aesthetic scoring criteria with consideration of asymmetry, broad mandibular border line, and prominent mandibular angle. Two maxillofacial surgeons and two orthodontists rated their aesthetical evaluation from 1 to 5. Experimental group consisting of 47 female and 38 male patients who had rotational orthognathic two-jaw surgery from 2010 to 2011 were chosen according to aesthetic scoring done by two maxillofacial surgeons and two orthodontists. A high aesthetic score (${\geq}16$) means the facial contour is symmetric, with no broad and narrow aesthetic mandible frontal profiles. Control A group consisted of ten female and ten male patients who had no orthognathic surgery experience and low aesthetic score (${\geq}10$). Control B group consisted of ten female and ten male patients who had no orthognathic surgery experience and had anaesthetic mandibular frontal profile and a high aesthetic score (${\geq}16$). The three-dimensional image of the patient was taken from dental cone-beam CT (DCT) scanning (experimental group and control A group: 6 months DCT after surgery, control B group: 1st visit DCT). Each DCT was reformatted to reorient the 3D image using 3D analyzing program (OnDemand3D, cybermed Inc, CA, USA). After selection of 12 landmarks and the construction of reoriented horizontal, vertical, and coronal reference lines, 15 measurements were taken in 3D analysis of frontal mandibular morphology. Afterwards, horizontal and vertical linear measurements and angular measurements, linear ratio were obtained. Results: Mean $Go^{\prime}_{Rt}-Me^{\prime}-Go^{\prime}_{Lt}$ angular measurement was $100.74{\pm}2.14$ in female patients and $105.37{\pm}3.62$ in male patients. These showed significant difference with control A group in both genders. Ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}-Me^{\prime}$ length to some linear measurements (ratio of $Me^{\prime}-Cd^{\prime}_{Rt}Cd^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Me^{\prime}-Go^{\prime}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$, ratio of $Go^{\prime}_{Rt}-Go^{\prime}_{Lt}$ to $Me^{\prime}-Go^{\prime}_{Rt}Go^{\prime}_{Lt}$) showed significant difference with control A group in both genders. Conclusion: This study was intended to find some standard measurement of mandible frontal view in 3D analysis of aesthetic patient. So, these potential measurement value may be helpful for orthognathic treatment planning to have more aesthetic and perspective outcomes.

• Korean Journal of Cognitive Science
• /
• v.14 no.4
• /
• pp.1-7
• /
• 2003

The common features of the behavioral inhibition and the action monitoring that are considered as one of the executive functions were investigated using event-related brain potentials (ERPs) and source localization analysis. The electrophysiological correlates of behavioral inhibition and action monitoring ate analyzed when the subjects performed the Go/NoGo task. Two ERP components of behavioral inhibition termed as N200 and P300 in NoGo condition were differ from those of Go condition, that is the amplitudes of NoGo N200 and P300 are largest on the fronto-central region, which may reflect the inhibitory control of frontal lobe required in NoGo condition. The error-related negativity (ERN) observed on the fronto-central region when the subjects committed error was much larger in amplitude and faster in latency than those of the correct-related negativity (CRN), which may indicate that the signal of action monitoring is much more required for the error response. The correlation analysis for the ERP components of behavioral inhibition and action monitoring revealed the significant negative correlation among the latencies of NoGo N200 and P300 and the amplitude of ERN, which may reflects that the faster subjects inhibit response, the more monitor their own action. The close relationship between behavioral inhibition and action monitoring was also supported by the results of source localization analysis, which showed the common neural sources of NoGo N200 and ERN was anterior cingulate cortex.

• Journal of Broadcast Engineering
• /
• v.22 no.6
• /
• pp.724-733
• /
• 2017

Conventional methods of automatically recording Go game positions do not properly consider obstacles (hand or object) on a Go board during the Go game. If the Go board is blocked by obstacles, the position of a Go stone may not be correctly recognized, or the sequences of moves may be stored differently from the actual one. In the proposed algorithm, only the complete Go board image without obstacles is stored as a background image and the obstacle is recognized by comparing the background image with the current input image. To eliminate the phenomenon that the shadow is mistaken as obstacles, this paper proposes the new obstacle detection method based on the gradient image instead of the simple differential image. When there is no obstacle on the Go board, the background image is updated. Finally, the successive background images are compared to recognize the position and type of the Go stone. Experimental results show that the proposed algorithm has more than 95% recognition rate in general illumination environment.

• Journal of The Korean Astronomical Society
• /
• v.38 no.1
• /
• pp.13-16
• /
• 2005

We present a period analysis of the well known $\beta$ Lyrae type eclipsing binary GO Cyg $(P= 0^d .7177)$. Several new times of minimum light, recorded photoelectrically, have been gathered. Analysis of all available eclipse timings of GO Cyg has confirmed a significant period increase with rate of $2.52 {\times} 10^{-10}$ day / cycle, also new period has been estimated. New linear and quadratic ephemerides have been calculated for the system.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.357-365
• /
• 2012

There are orthodontic treatment which involves tooth movements and orthopedic treatment which involves skeletal movement. In childhood and adolescence, especially for the treatment of orthopedic treatment, the evaluation of bone maturity and growth potential is very important. The purpose of this study is to assess the developmental stage and to compare the amount of mandibular growth with cephalometric radiographs and hand-wrist radiograph in 6 to 13-year-old children with normal occlusion. The results are as follows : SMI and CVM showed a significant correlation (p < 0.05). Ar-Go, Co-Go, N-Go, S-Gn, N-Me, Co-Gn, Go-Me, Go-Gn increased with increasing maturity of hand-wrist and Ar-Go, Co-Go, N-Go, S-Gn, N-Me, Co-Gn, Go-Me, Go-Gn increased with increasing maturity of cervical vertebrae maturation. Also Ar-Go, Co-Go, N-Go, S-Gn, N-Me, Co-Gn, Go-Me, Go-Gn showed a significant correlation with each of the cervical vertebrae maturation stages and hand-wrist maturation stages (p < 0.05). These results suggested that mandibular growth had a significant correlation with cervical vertebrae maturation stages and hand-wrist maturation stages.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.3
• /
• pp.15-23
• /
• 2014

There have been CFIT(Controlled Flight Into Terrain) accidents that can be prevented if the crew executed go-around. This study is to analyse the common factors of three typical CFIT accidents of Korea in TEM(threat and error management) frame, and the examples of go-around gate and the countermeasures of eight airlines through the survey facilitating go-around to prevent CFIT. The common factors found in three typical CFIT accidents occurred in Korea or by Korean carriers turned out to be in mountainous terrain, in bad weather while in non-precision approach or circling approach by captain as PF(Pilot Flying) when crew make monitoring errors and communication errors. It also turned out that the crew in all three typical tragic CFIT accidents did not execute go-around in unstabilized approaches. The captains did not respond immediately when first officers advised them to go-around until it is too late. Seven out of eight Airlines answered that they use stabilized approach height as 1,000 feet to be stabilized earlier to have more safety margin by enhancing go-around gate regardless of the weather to prevent CFIT in the survey.