• 제목/요약/키워드: GNSS receiver

검색결과 212건 처리시간 0.025초

DGPS 기준국용 수신기의 성능검증 방법 (Performance Verification Method of Receiver for DGPS Reference Station)

  • 최진규;조득재;박상현;서상현
    • 한국항해항만학회지
    • /
    • 제31권10호
    • /
    • pp.859-864
    • /
    • 2007
  • 미래 항만내 항법에서 요구하는 sub-meter 수준의 위치정확도를 만족하기 위해 DGPS와 같은 위성전파항법 보강시스템의 활용이 필요하다. 일반적으로 해양에서 사용하는 DGPS 기준국용 수신기는 RSIM Ver. 1.1에서 제시한 DGPS 기준국용 수신기 성능 요구사항을 만족해야 하고, 이에 대한 성능검증이 필요하다. 본 논문에서는 해양에서 사용하는 DGPS 기준국용 수신기의 성능검증방법을 제안하였다. 그리고 제안한 DGPS 기준국용 수신기 성능검증 방법으로 실시한 상용 DGPS 기준국용 수신기의 성능검증 실험을 통하여 제안한 성능검증 방법을 검증하였다.

소프트웨어 기반의 GPS L1 및 갈릴레오 E1/E5a 신호 처리 구현 및 성능에 관한 연구 (A Study on the Implementation and Performance Analysis of Software Based GPS L1 and Galileo E1/E5a Signal Processing)

  • 신천식;이상욱;윤동원;김재훈
    • 한국항행학회논문지
    • /
    • 제13권3호
    • /
    • pp.319-326
    • /
    • 2009
  • 본 논문에서는 위성항법신호감시국용 GPS/갈릴레오 복합 수신기에서의 소프트웨어 기반의 GPS L1 및 갈릴레오 E1/E5a 신호처리 결과를 기술한다. 성능 검증을 위해 GNSS RF 신호 시뮬레이터 또는 GPS 위성의 실제 신호를 사용하였고, 세부적으로는 광대역 안테나, 112MHz 샘플링 주파수 및 8비트 양자화 레벨을 제공하는 RF/IF 유니트를 이용하여 갈릴레오 시험위성인 지오베-A(GIOVE-A) E1 신호처리를 통해, 갈릴레오 신호처리를 검증하고, FPGA 기반의 신호처리 보드상에서의 시험결과를 제시한다.

  • PDF

Design of Multi-Constellation and Multi-Frequency GNSS SDR with Fully Reconfigurable Functionality

  • Song, Young-Jin;Lee, Hak-beom;Won, Jong-Hoon
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제10권2호
    • /
    • pp.91-102
    • /
    • 2021
  • In this paper, a fully reconfigurable Software Defined Radio (SDR) for multi-constellation and multi-frequency Global Navigation Satellite System (GNSS) receivers is presented. The reconfigurability with respect to the data structure, variability of signal and receiver parameters, and receiver's internal functionality is presented. The configuration file, that is modified to lead to an entirely different operation of the SDR in response to specific target signal scenarios, directly determines the operating characteristics of the SDR. In this manner, receiver designers can effectively reduce the effort to develop many different combinations of multi-constellation and/or multi-frequency GNSS receivers. Finally, the implementation of the presented fully reconfigurable SDR is included with the experimental processing results such as acquisition, tracking, navigation for the received signals in the realistic fields.

도심환경에서의 GNSS 기반 육상 이동체를 위한 짧은 지연 다중경로 감쇄 기법 (A Novel Short Delay Multipath Mitigation Algorithm for a GNSS based Land Vehicle in Urban Environment)

  • 임덕원;천세범;허문범
    • 한국항행학회논문지
    • /
    • 제22권6호
    • /
    • pp.557-565
    • /
    • 2018
  • 도심환경에서의 GNSS 항법을 위하여 짧은 지연 다중경로 감쇄 기법을 제안하였다. 제안한 기법은 GNSS 수신기가 육상 교통 이동체에 탑재되어 있다는 제한 조건을 이용하여 어느 위성에서 다중경로 신호가 발생했는지를 검출하고, 해당위성의 측정치를 제거하여 새로운 항법결과를 도출한다. 이때 검출 조건은 GNSS 수신기의 성능 등급과 이동체의 동적 특성에 따라 결정된다. 제안 기법을 검증하기 위하여 4가지 시나리오에 대한 다중경로 환경에서 실제 데이터를 수집하였으며, GNSS 수신기에 기본적으로 탑재된 다중경로 감쇄 기법과 제안한 기법을 함께 적용하여 데이터를 처리한 결과 가시위성이 5개 미만인 경우를 제외하고는 측위 결과가 5 m 이하로 나타나는 것을 확인하였다.

통합의사잡음 신호를 사용한 GNSS의 재방송재밍 검출기법 (A Novel Repeat-back Jamming Detection Scheme for GNSS using a Combined Pseudo Random Noise Signal)

  • 유승수;염동진;지규인;김선용
    • 제어로봇시스템학회논문지
    • /
    • 제20권9호
    • /
    • pp.977-983
    • /
    • 2014
  • A repeat-back jamming signal is an intentionally re-broadcasted GNSS (Global Navigation Satellite System) interference. In this paper, a novel repeat-back jamming detection scheme is proposed. The proposed scheme uses a combined pseudo random noise signal (C-PRN) and is available for a generic GNSS receiver with a single antenna. The C-PRN signal is made by combining several received pseudo random noise signals that had been transmitted from the visible GNSS satellites. Through a Monte-Carlo simulation, the detection probability of a repeat-back jamming signal detected with the proposed scheme is presented.

저비용 GNSS 수신기를 이용한 반송파 위상 시각간 차분 측정치 기반의 정밀 상대위치 결정 기법 (A Precise Relative Positioning Method Based on Time-Differenced Carrier Phase Measurements from Low-Cost GNSS Receiver)

  • 박귀우;이동선;박찬식
    • 한국통신학회논문지
    • /
    • 제40권9호
    • /
    • pp.1846-1855
    • /
    • 2015
  • 본 논문에서는 저비용 단일 GNSS(Global Navigation Satellite System) 수신기를 이용하여 정밀한 위치를 추정하는 방법으로 반송파 위상 TD(Time Differenced) 측정치를 이용한 상대위치 결정기법을 제안하고 성능을 분석하였다. 제안하는 상대위치 결정기법은 반송파 위상 측정치를 활용하지만 시각 간 차분을 사용하므로 하나의 GNSS 수신기로 동작하며, 미지정수 결정 문제를 고려하지 않아도 된다. 또한 차분 간격이 짧은 시간일 경우 공간적 공통오차 및 위성시계 오차를 효율적으로 제거할 수 있다. 제안하는 위치결정 알고리즘은 오차해석을 통해 코드측정치를 이용한 절대위치 결정기법보다 성능이 우수함을 증명하고 실차 실험으로 구현된 알고리즘 및 오차해석 결과를 검증하였다. 그 결과, 위치추정 성능은 약 10분 동안 3m이내에 수렴하여 코드기반의 절대위치기법에 비하여 약 4배 이상 향상된 정확도 및 정밀도를 확인할 수 있었다.

단일주파수 GNSS 수신기를 위한 전리층 모델 비교 (Comparison of Ionosphere Models for Single Frequency GNSS Receiver)

  • 이창문;박관동
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2010년 춘계학술발표회 논문집
    • /
    • pp.147-150
    • /
    • 2010
  • Ionopheric deley is the largest error sources in GNSS positining. The single frequency receiver user needs an ionospheric model like the Klobuchar model or NeQuick model to eliminate the ionospheric error. In this study we estimated VTEC(Vertical Total Electron Content) over DAEJ station using the two models in each season. We compared the results with Global Ionosphere Maps and International Reference Ionosphere model predictions. As a result, the NeQuick model was more accurate than Klobuchar model.

  • PDF

S 대역 신호에 의한 위성항법수신기의 RF 신호간섭 (Radio Frequency Interference on the GNSS Receiver due to S-band Signals)

  • 권병문;신용설;마근수;주정갑;지기만
    • 한국항공우주학회지
    • /
    • 제47권5호
    • /
    • pp.388-396
    • /
    • 2019
  • 본 논문은 시험발사체에 탑재된 송신기에서 송신되는 S 대역 신호에 의해 위성항법수신기에서 나타난 RF 신호간섭을 설명하고, 그 원인을 분석한다. 능동형 위성항법안테나의 LNA는 항법위성 신호와 비교하여 상대적으로 신호세기가 매우 높은 S 대역 신호에 의해 포화되었으며, 2개의 S 대역 신호가 위성항법안테나에 수신될 때마다 GNSS 대역에 해당하는 상호변조신호가 LNA에서 발생하였다. 이러한 현상으로 인해 위성항법수신기에서 계산된 항법위성신호의 C/N0가 크게 감쇄하였다. S 대역 신호에 의한 RF 신호간섭을 차단하기 위하여 위성항법안테나 LNA의 설계변경을 수행하였고, 설계변경 전 후의 LNA에 대해 수행한 비교시험을 통하여 설계변경된 LNA에서 S 대역 신호에 의한 RF 신호감쇄 현상이 억제될 수 있음을 확인하였다.

Design of a High Dynamic-Range RF ASIC for Anti-jamming GNSS Receiver

  • Kim, Heung-Su;Kim, Byeong-Gyun;Moon, Sung-Wook;Kim, Se-Hwan;Jung, Seung Hwan;Kim, Sang Gyun;Eo, Yun Seong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제4권3호
    • /
    • pp.115-122
    • /
    • 2015
  • Global Positioning System (GPS) is used in various fields such as communications systems, transportation systems, e-commerce, power plant systems, and up to various military weapons systems recently. However, GPS receiver is vulnerable to jamming signals as the GPS signals come from the satellites located at approximately 20,000 km above the earth. For this reason, various anti-jamming techniques have been developed for military application systems especially and it is also required for commercial application systems nowadays. In this paper, we proposed a dual-channel Global Navigation Satellite System (GNSS) RF ASIC for digital pre-correlation anti-jam technique. It not only covers all GNSS frequency bands, but is integrated low-gain/attenuation mode in low-noise amplifier (LNA) without influencing in/out matching and 14-bit analogdigital converter (ADC) to have a high dynamic range. With the aid of digital processing, jamming to signal ratio is improved to 77 dB from 42 dB with proposed receiver. RF ASIC for anti-jam is fabricated on a 0.18-μm complementary metal-oxide semiconductor (CMOS) technology and consumes 1.16 W with 2.1 V (low-dropout; LDO) power supply. And the performance is evaluated by a kind of test hardware using the designed RF ASIC.

A Performance Analysis of Multi-GNSS Receiver with Various Intermediate Frequency Plans Using Single RF Front-end

  • Park, Kwi Woo;Chae, Jeong Geun;Song, Se Phil;Son, Seok Bo;Choi, Seungho;Park, Chansik
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제6권1호
    • /
    • pp.1-8
    • /
    • 2017
  • In this study, to design a multi-GNSS receiver using single RF front-end, the receiving performances for various frequency plans were evaluated. For the fair evaluation and comparison of different frequency plans, the same signal needs to be received at the same time. For this purpose, two synchronized RF front-ends were configured using USRP X310, and PC-based software was implemented so that the quality of the digital IF signal received at each front-end could be evaluated. The software consisted of USRP control, signal reception, signal acquisition, signal tracking, and C/N0 estimation function. Using the implemented software and USRP-based hardware, the signal receiving performances for various frequency plans, such as the signal attenuation status, overlapping of different systems, and the use of imaginary or real signal, were evaluated based on the C/N0 value. The results of the receiving performance measurement for the various frequency plans suggested in this study would be useful reference data for the design of a multi-GNSS receiver in the future.