• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.57-58
• /
• 2018

본 논문에서는 UHF RFID(902-928 MHz)와 GNSS(1,164-1,605 MHz)를 포함하는 광대역용 준-야기(quasi-Yagi) 안테나를 설계 방법에 대해 연구하였다. 제안된 안테나는 3소자(다이폴, 반사기, 도파기)로 구성되고, 코플래너 도파관(coplanar waveguide)으로 급전되며, 밸런을 내장하고 다이폴과 반사기의 끝부분을 접은 소형 안테나이다. 도파기를 다이폴에 근접한 영역에 두고 칩 커패시터를 안테나에 장하하여 광대역 임피던스 정합특성을 얻었다. 시뮬레이션을 통해 설계된 광대역 안테나를 0.8 mm 두께의 FR4 기판에 제작하고, 안테나 특성을 실험한 결과들이 시뮬레이션과 잘 일치함을 확인하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권3호
• /
• pp.181-189
• /
• 2022

The public open signals from Global Navigation Satellite System (GNSS) including Global positioning system (GPS) are used widely by many peoples in the world except for the public regulated restriction signals which are encrypted. Nowadays there are growing concerns about GNSS signal spoofing which can deceive the GNSS receivers by abusing these open services. To counter these spoofing threats, many researches have been studied including array antenna techniques which can detect the direction of arrival by means of Multiple Signal Classification (MUSIC) algorithm. Originally the array antenna techniques were developed to countermeasure the jamming signal in electronic warfare by using the nulling or beamforming algorithm toward a certain direction. In this paper, we study the anti-spoofing techniques using array antenna to overcome the jamming and spoofing issues simultaneously. First, we will present the theoretical analysis results of spoofing signal response of Minimum Variance Distortionless Response (MVDR) algorithm in array antenna. Then the eigenvector algorithm of covariance matrix is suggested and verified to work with the existing anti-jamming method. The modeling and simulation are used to verify the effectiveness of the anti-spoofing algorithm. Also, the field test results show that the array antenna system with the proposed algorithms can perform the anti-spoofing function. This anti-spoofing method using array antenna is very effective in the view point of solving both the jamming and spoofing problems using the same array antenna hardware.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권2호
• /
• pp.83-89
• /
• 2022

For precise GNSS applications, the antenna phase center correction (PCC) is absolutely required. The PCC magnitude can reach the centimeter level with the antenna structure. In the present study, we first investigate the phase center offset (PCO) and phase center variation (PCO) of three different antenna models in two different reference frames, IGS08/igs08.atx and IGS14/igs14.atx. Clear L1 and L2 PCO differences were found between IGS08 and IGS14. In addition, the PCV showed characteristics that is dependent upon the signal direction (azimuth and elevation angle). The remarkable thing is that the changes of a Dorne Margolin choke-ring antenna model (AOAD/MT DOME) was very small in two reference frames. In order to analyze changes in positions according to different reference systems, GNSS data obtained from DAEJ, SUWN, and TSKB stations were processed by the precise point positioning (PPP) method. We suggest that an antenna PCO/PCV can affect the precise GNSS positioning on the order of several millimeters in two different reference frames.

• 지구물리와물리탐사
• /
• 제12권2호
• /
• pp.208-214
• /
• 2009

보은과 괴산에 위치한 GNSS상시관측소의 GNSS관측자료와 경사계자료를 이용하여, 1시간과 3시간 동안의 GNSS 차분벡터의 변위와 시간에 따른 차분 경사 벡터의 변위를 계산했다. 그리고, 시간에 따른 두 변위 사이의 관련성을 얻었다. 이렇게 계산된 관련성은 ‘높음‘보다는 낮았다. 그러나, 일사량의 일변화는 일어남이 확실하고, 측정 결과 안테나탑의 경사 변위 때문에 안테나 위상중심 위치의 회전 운동이 존재함이 확실하므로, 우리는 DGNSS에 있어서 보정 오차를 방송할 때와 가상기준국체계(VRS)에 있어서 상시관측소에서 측정된 자료를 방송할 때에 안테나 위상중심 위치의 일변화를 고려할 것을 제안한다.

• 한국군사과학기술학회지
• /
• 제13권2호
• /
• pp.313-319
• /
• 2010

GNSS receiver which uses the weak satellite signal is very vulnerable to the intentional jamming or non-intentional electromagnetic interference. One of the best method to overcome this disadvantage is to use an adaptive array antenna which has the capability of beamforming or nulling to the certain direction. In this paper, the performance of spatial adaptive null pattern control algorithm of 5 element array antenna is analyzed. A control algorithm which is designed in the 5 element array antenna is OPM(Output Power Minimization) which is eliminating the correlation characteristics between a reference antenna and the others. This algorithm can be applied effectively to the satellite navigation's CRPA because the satellite direction is not considered and GNSS signal power is below the thermal noise. The feature of the OPM algorithm is analyzed and the performance is compared with other null pattern control algorithm.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권1호
• /
• pp.19-29
• /
• 2019

This paper analyzes the design factors for GNSS anti-jamming receiver system in which the adaptive beamforming algorithm is applied in GNSS receiver system. The design analysis factors used in this paper are divided into three: antenna, beamforming algorithm, and operation environment. This paper analyzes the above three factors and presents numerical simulation results on antenna and beamforming algorithm.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.977-983
• /
• 2014

A repeat-back jamming signal is an intentionally re-broadcasted GNSS (Global Navigation Satellite System) interference. In this paper, a novel repeat-back jamming detection scheme is proposed. The proposed scheme uses a combined pseudo random noise signal (C-PRN) and is available for a generic GNSS receiver with a single antenna. The C-PRN signal is made by combining several received pseudo random noise signals that had been transmitted from the visible GNSS satellites. Through a Monte-Carlo simulation, the detection probability of a repeat-back jamming signal detected with the proposed scheme is presented.

• Journal of electromagnetic engineering and science
• /
• 제15권4호
• /
• pp.199-205
• /
• 2015

An electromagnetic band gap (EBG) metamaterial construction is presented. A construction of a multipath mitigating ground plane, based on the EBG metamaterial is described. A method of the ground plane application and installation, which provides the multipath mitigating without spoiling antenna element phase center stability, is suggested and explained. A designed construction of GNSS antenna module, which contains the multipath mitigating ground plane, made from the presented EBG metamaterial and installed in the described way is shown and parameters of the antenna module are provided.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.110-115
• /
• 2021

A multi-band, compact, and complex vehicle roof antenna has become important in terms of car exterior design and multi-functions which include Radio, DAB/DMB, SXM, GNSS, Telematics, and V2X. In this paper, we propose a compact multi-band V2X pole-type roof antenna. Using impedance change characteristic, a single pole antenna which has multiband such as radio, DAB/DMB, telematics, and V2X band is proposed. With two patch antennas for GNSS and SXM, the dimension of a multiband roof antenna is 131x63x37mm only.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권3호
• /
• pp.215-220
• /
• 2020

This paper deal with estimating the direction of arrival (DOA) of GNSS signal using two antennae for spoofing detection. A technique for estimating the azimuth angle of a received signal by applying the interferometer method to the GPS carrier signal is proposed. The experiment assumes two antennas placed on the earth's surface and estimates the azimuth angle when only GPS signal are received without spoofing signal. The proposed method confirmed the availability through GPS satellite placement simulation and experiments using a dual antenna GPS receiver. In this case of using dual antenna, an azimuth angle ambiguity of the received signal occurs with respect to the baseline between two antennas. For this reason, the accurate azimuth angle estimation is limits, but it can be used for deception by cross-validating the ambiguity.