• 한국환경농학회지
• /
• 제38권1호
• /
• pp.1-9
• /
• 2019

BACKGROUND: Accurate and simple analytical method determining Fluxametamid residue was necessary in various food matrices. Additionally, fulfilment of the international guideline of Codex (Codex Alimentarius Commission CAC/GL 40) was required for the analytical method. In this study, we developed Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) method to determine the Fluxametamid residue in foods. METHODS AND RESULTS: Fluxametamid was extracted with acetonitrile, partitioned and concentrated with dichloromethane. To remove the interferences, silica SPE cartridge was used before LC-MS/MS (Liquid Chromatography-Tandem Mass Spectrometry) analysis with $C_{18}$ column. Five agricultural commodities (mandarin, potato, soybean, hulled rice, and red pepper) were used as a group representative to verify the method. The liner matrix-matched calibration curves were confirmed with coefficient of determination ($r^2$) greater than 0.99 at calibration range of 0.001-0.25 mg/kg. The limits of detection and quantification were 0.001 and 0.005 mg/kg, respectively. Mean average accuracies were shown to be 82.24-115.27%. The precision was also shown to be less than 10% for all five samples. CONCLUSION: The method investigated in this study was suitable to the Codex guideline for the residue analysis. Thus, this method can be useful for determining the residue in various food matrices as routine analysis.

• 경영과학
• /
• 제33권4호
• /
• pp.17-31
• /
• 2016

Waste sector has been a target of abatement policies by the most governments, even though its greenhouse gas (GHG) emission is not so high, since it is related to almost of other sectors. This study propose new GHG calculation equations which resolves logical contradiction of IPCC GL (Intergovernmental Panel on Climate Change Guideline) equations by including waste-to-energy effects. According to two GHG calculation equations, GHG emission inventory and BAU by the year 2050 have been computed. And GHG abatement potential and marginal cost for the five abatement policies carefully selected from the previous researches have been calculated for the year 2020. The policy that makes solid fuel like RDF from flammable wastes and uses them as combustion fuel of electricity generations has been found to be the most efficient and effective one among five policies. The cumulative abatement amount when five policies not mutually exclusive are applied sequentially has been reckoned.

• 한국기계가공학회지
• /
• 제14권3호
• /
• pp.131-140
• /
• 2015

The purpose of this study is to predict the fatigue life of a planet carrier of a slewing reducer for a tower crane. To predict the fatigue life of the carrier, the inertia endurance test was carried out, and then the input torque profile for the reducer was obtained. The load profile acting on the planet pins that assembled the carrier was calculated from the measured input torque profile using commercial gearbox analysis software. The stress profiles of the carrier weak points were analyzed from the calculated load profile and boundary conditions using commercial FE software, and the stress cycles were determined using the rainflow counting method. Finally, the fatigue life of the carrier was predicted using the equivalent stress range by considering the effect of mean stress, and an S-N curve was drawn up using the GL guideline and the cumulative damage law.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2011년 춘계학술대회논문집
• /
• pp.236-239
• /
• 2011

This paper introduces the design concepts and characteristics of WinDS3000$^{TM}$(TC IIa) which is a trade name of Doosan's 3MW offshore/onshore wind turbine. WinDS3000$^{TM}$(TC IIa) has been designed in consideration of high Reliability, Availability, Maintainability and Serviceability (RAMS) and low cost of electricity (CDE) for the TC IIa condition based on GL guideline. An integrated drive-train design with an innovative three-stage gearbox has been introduced to minimize nacelle weight of the wind turbine and to enhance a high reliability for transmission. A permanent magnet generator with full converter system has been introduced to get higher efficiency in partial load operation and grid-friendly system for both 50 Hz and 60 Hz. A pitch-regulated variable speed control system has been introduced to control wind turbine power while generator reaction torque can be adjusted almost instantaneously by the associated power electronics. The wind turbine has been also equipped with condition monitoring and diagnostic systems in order to meet maintainability requirements.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2010년도 정기 학술발표대회
• /
• pp.53.2-53.2
• /
• 2010

국내 홍수빈도해석 지침서 제공을 위한 기초 연구로서 미국 홍수빈도해석 지침서인 Bulletin 17B과 같이 국내 적합한 홍수빈도해석 기법을 제시하고자 하였다. 홍수빈도해석 지침서의 핵심은 확률분포형과 매개변수 추정법을 제시하는 것이며 이에 GEV(Generalized Extreme Value), GLO(Generalized Logistic) 분포, B-GLS(Bayesian Generalized Least Square) 기법을 대상으로 다양한 연구를 수행하였다. B-GLS 기법을 이용하여, 국내 대유역에 골고루 위치하며 댐의 영향을 받지 않는 31개 지점의 연최대 일유량 시계열의 L-변동계수(L-moment coefficient variation)와 L-왜도계수(L-moment coefficient skewness)를 추정할 수 있는 회귀모형을 제안하였다. 위 회귀모형을 구성하기 위한 유역특성으로는 유역면적, 유역경사, 유역평균강우 등을 사용하였다. Bayesian-GLS(B-GLS) 적용 결과를 OLS(Ordinary Least Square) 및 B-GLS 기법에서 지점간의 상관관계를 고려하지 않는 Bayesian-WLS(Weighted Least Square)와 비교 평가하여 그 우수성을 입증하였다. 따라서 본 연구에서 제안된 B-GLS에 의한 지역회귀모형은 국내의 미계측유역이나 또는 관측 길이가 짧은 계측유역의 홍수빈도분석을 위해 매우 유용할 것으로 기대된다. 또한 수행된 연구의 내용을 공론화하는 노력이 계속된다면 공감대가 형성된 가이드라인을 제정되는데 일조를 하리라 확신한다.

• 한국해양공학회지
• /
• 제35권2호
• /
• pp.161-171
• /
• 2021

For the fatigue design of offshore structures, it is essential to understand and use the S-N curves specified in various industry standards and codes. This study compared the characteristics of the S-N curves for five major codes. The codes reviewed in this paper were DNV Classification Rules (DNV GL, 2016), ABS Classification Rules (ABS, 2003), British Standards (BSI, 2015), International Welding Association Standards (IIW, 2008), and European Standards (BSI, 2005). Types of stress, such as nominal stress, hot-spot stress, and effective notch stress, were analyzed according to the code. The basic shape of the S-N curve for each code was analyzed. A review of the survival probability of the basic design S-N curve for each code was performed. Finally, the impact on the conservatism of the design was analyzed by comparing the S-N curves of three grades D, E, and F by the five codes. The results presented in this paper are considered to be a good guideline for the fatigue design of offshore structures because the S-N curves of the five most-used codes were analyzed in depth.

• 분석과학
• /
• 제26권2호
• /
• pp.142-153
• /
• 2013

Milbemycin계 속효성 살충제인 lepimectin의 국내 잔류허용기준이 신설 고시됨에 따라 농산물 중 lepimectin 잔류량을 측정하기 위해 고성능 액체크로마토그래프를 이용한 신속, 정확한 분석법을 개발하였다. Lepimectin 잔류물은 메탄올로 추출하여 포화식염수와 디클로로메탄을 이용한 액액분배를 수행하였고, 플로리실로 충진한 유리칼럼 및 아미노프로필 카트리지를 이용하여 두 번의 정제 과정을 거친 후 HPLC-PAD (High performance liquid chromatograph-photodiode array detector)를 통해 기기분석을 수행하였으며, LC-MS (Liquid Chromatograph-Mass Spectrometer)로 재확인하였다. Lepimectin 표준품의 직선성은 lepimectin $A_3$, $A_4$ 모두에서 상관계수($R^2$)가 0.9999로 우수하였다. 개발한 분석법으로 오이, 고추, 현미, 감귤, 감자, 대두에 대한 lepimectin의 회수율을 측정한 결과, 76.0~114.8% 범위로 10% 미만의 표준오차를 나타내었으며, 분석법의 검출한계는 0.005 mg/kg, 정량한계는 0.01 mg/kg이었다. 또한 광주지방식약청, 대전지방식약청의 분석법 검증 결과, 각각 70.3~108.8%, 80.5~95.6%의 회수율과 10% 미만의 표준 오차를 나타내었다. 분석법에 대한 각 실험실의 회수율과 표준오차 및 실험실간 표준 오차($RSD_R$; Relative Standard Deviation on Reproducibility)는 코덱스 기준(CAC/GL 40)에 적합함을 확인하였다. 따라서 본 연구에서 개발된 분석법은 lepimecin 잔류물의 안전관리를 위한 최적의 분석법으로 판단된다.

• 한국동물위생학회지
• /
• 제31권3호
• /
• pp.347-356
• /
• 2008

The purpose of this study was to evaluate the efficacy and cross-protection of serovar 12 against serovar 4 or 5 of H parasuis with M+$Parapac^{(R)}$. A total of 141 piglets from 2(A and B) farms were used and divided into experimental group and control group in each farm. Farm A has been detected H parasuis serovar 12, whereas farm B has been detected H parasuis serovar 4 or 5 from post-weaned pigs with PMWS. The piglets were vaccinated intramuscularly with 2.0ml of M+$Parapac^{(R)}$ in experimental group or normal saline in control group at 1 week of age. A same booster dose was given at 3 weeks of age. In order to value the antibody titer to H parasuis using by tube agglutination test, blood samples were collected from piglets at the aged of 1 week, 6 and 14 weeks. In experimental group and control group, the average antibody titers were $32.5{\pm}21.0,\;114.5{\pm}34.0,\;98.1{\pm}55.4$ and $32.9{\pm}18.6,\;25.8{\pm}36.9,\; 746.7{\pm}1,215.8$ at the aged of 1 week, 6 and 14 weeks, respectively. The cumulative clinical sign indexes by standard guideline of Schering-Plough Animal Health Corp were 486 and 1,069, respectively. The average daily gains and feed conversion rates were $0.553{\pm}0.016kg$ and $0.492{\pm}0.004kg$, and 1.99 and 2.24, respectively. The average gross lesion scores were $1.0{\pm}0.8$ and $1.9{\pm}0.6$, respectively. According to these results, the M+$Parapac^{(R)}$ containing H parasuis serovar 12 may be induce circulating antibodies that cross-react with serovar 4 or 5 and have a protection of PMWS with H parasuis.

• 한국식품위생안전성학회지
• /
• 제35권2호
• /
• pp.109-117
• /
• 2020

본 연구는 불법적으로 수산물에 사용될 수 있는 염료 18 종에 대한 안전관리 강화를 위해 정량 및 정성 분석이 가능한 LC-MS/MS 를 적용하여 검증하기 위해 수행되었다. 확립된 시험법은 CODEX CAC/GL-71 가이드라인에 따라 직선성, 정밀성, 정량한계 및 회수율 등을 통해 유효성을 확인하였다. 대상시료에 1% 아세트산을 함유한 아세토니트릴로 추출 후 C₁₈ 과 PSA 로 정제하였다. 본 실험에서 정량한계는 0.002 mg/kg 수준으로 정량한계를 포함한 농도에 따라 검량선을 작성하였고 모두 0.98 이상의 직선성을 확인하였다. 또한 정확성은 63%-112% 이고, 정밀도는 15% 이하로 재현성이 우수하였다. 국내 유통 중인 수산물 124 건을 수거하여 개발된 분석법의 적용성 검증과 안전성을 확인하고자 잔류실태조사를 실시 하였고 그 결과 7 건이 미량으로 검출 되었고 부적합은 없었다. 확립된 시험법은 수산물 안전관리에 활용할 수 있을 것으로 사료되는 바이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권3호
• /
• pp.439-446
• /
• 2014

Many studies on methane ($CH_4$) and nitrous oxide ($N_2O$) emissions from livestock industries have revealed that livestock production directly contributes to greenhouse gas (GHG) emissions through enteric fermentation and manure management, which causes negative impacts on animal environment sustainability. In the present study, three essential values for GHG emission were measured; i.e., i) maximum $CH_4$ producing capacity at mesophilic temperature ($37^{\circ}C$) from anaerobically stored manure in livestock category ($B_{0,KM}$, Korean livestock manure for $B_0$), ii) $EF_{3(s)}$ value representing an emission factor for direct $N_2O$ emissions from manure management system S in the country, kg $N_2O-N$ kg $N^{-1}$, at mesophilic ($37^{\circ}C$) and thermophilic ($55^{\circ}C$) temperatures, and iii) $N_{ex(T)}$ emissions showing annual N excretion for livestock category T, kg N $animal^{-1}$ $yr^{-1}$, from different livestock manure. Static incubation with and without aeration was performed to obtain the $N_2O$ and $CH_4$ emissions from each sample, respectively. Chemical compositions of pre- and post- incubated manure were analyzed. Contents of total solids (% TS) and volatile solid (% VS), and the ratio of carbon to nitrogen (C/N) decrease significantly in all the samples by C-containing biogas generation, whereas moisture content (%) and pH increased after incubation. A big difference of total nitrogen content was not observed in pre- and post-incubation during $CH_4$ and $N_2O$ emissions. $CH_4$ emissions (g $CH_4$ kg VS-1) from all the three manures (sows, layers and Korean cattle) were different and high C/N ratio resulted in high $CH_4$ emission. Similarly, $N_2O$ emission was found to be affected by % VS, pH, and temperature. The $B_{0,KM}$ values for sows, layers, and Korean cattle obtained at $37^{\circ}C$ are 0.0579, 0.0006, and 0.0828 $m^3$ $CH_4$ kg $VS^{-1}$, respectively, which are much less than the default values in IPCC guideline (GL) except the value from Korean cattle. For sows and Korean cattle, $N_{ex(T)}$ values of 7.67 and 28.19 kg N $yr^{-1}$, respectively, are 2.5 fold less than those values in IPCC GL as well. However, $N_{ex(T)}$ value of layers 0.63 kg N $yr^{-1}$ is very similar to the default value of 0.6 kg N $yr^{-1}$ in IPCC GLs for National greenhouse gas inventories for countries such as South Korea/Asia. The $EF_{3(s)}$ value obtained at $37^{\circ}C$ and $55^{\circ}C$ were found to be far less than the default value.