• The KSFM Journal of Fluid Machinery
• /
• v.16 no.4
• /
• pp.15-21
• /
• 2013

This study aims to estimate the fatigue resistance of small wind composite blade using the fatigue life estimation formula in the GL guideline. For this, firstly, we estimated a turbine blade's bending moment spectrum by using wind profile wind profile and BEMT. And fatigue tests were performed to obtain the S-N curve of composite materials used in blade. In addition, a finite element analysis was used to identify fatigue critical locations and fatigue stress spectrum. And the fatigue resistance of composite blade were evaluated using the rainflow cycle counting, and Goodman diagram and the fatigue life estimation formula in the GL guideline.

• Journal of Animal Environmental Science
• /
• v.18 no.2
• /
• pp.75-84
• /
• 2012

Current estimation of greenhouse gas (GHG) emissions from livestock agriculture in Korea was based on Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories (1996 IPCC GL) published in 1996 and emission data were published in National Inventory Report. New guideline book, 2006 IPCC Guidelines for National Greenhouse Gas Inventories (2006 IPCC GL), however, was published in 2006. Hence preparation to apply new guideline for the estimation of GHG emission would be necessary. In this study, 1996 IPCC GL and 2006 IPCC GL for livestock agriculture were compared. Estimated GHG emissions based on Tier 1 methods of 1996 IPCC GL and 2006 IPCC GL between 2000 and 2008 were also compared. Estimated GHG emissions based on 2006 IPCC GL were 1.27~1.33 times higher than those based on 1996 IPCC GL. These results were mainly caused by emission factors of each IPCC GL. More researches should be conducted to decrease uncertainties of national GHG inventories.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.5
• /
• pp.363-373
• /
• 2014

In this study, computational multi-body dynamic analyses for the drivetrain system of a 5 MW class offshore wind turbine have been conducted using efficient equivalent modeling technique based on the design guideline of GL 2010. The present drivetrain system is originally modeled and its related system data is adopted from the NREL 5 MW wind turbine model. Efficient computational method for the drivetrain system dynamics is proposed based on an international guideline for the certification of wind turbine. Structural dynamic behaviors of drivetrain system with blade, hub, shaft, gearbox, supports, brake disk, coupling, and electric generator have been analyzed and the results for natural frequency and equivalent torsional stiffness of the drivetrain system are presented in detail. It is finally shown that the present multi-body dynamic analysis method gives good agreement with the previous results of the 5 MW class wind turbine system.

• Journal of Biosystems Engineering
• /
• v.40 no.4
• /
• pp.305-313
• /
• 2015

Purpose: This study was performed to predict the fatigue life of a crank-type rotavator operated in domestic soil conditions using Recurdyn$^{(R)}$, a dynamic analysis program. Methods: Torque on the PTO shaft was measured using experiments conducted on the uplands and paddy fields in Korea. On the basis of the experimental and analytical results, the fatigue life of the crank-type rotavator was predicted by constructing an S-N curve according to the GL (Germanischer Lloyd Wind Energie GmbH) guideline. Results: The torques experienced by the PTO shaft in the paddy soil and the uplands were in the range of 472~797 N m and 313~430 N m, respectively, for every condition. In case of load condition, the peak torques (846 N m, 770 N m) were applied for severe conditions, resulting in a maximum (von Mises) stress of 75 MPa at the crank arm. The fatigue life of the crank-type rotavator was predicted to be 1,167 h that satisfies the target value of 1,110 h, by substituting the analysis results into an S-N curve of crank arm. Conclusions: The fatigue life of the crank-type rotavator was within the target life for the studied soil conditions; however, further field experiments for various soil conditions would be required to verify the prediction results.

• Journal of Korean Society of Rural Planning
• /
• v.23 no.2
• /
• pp.75-86
• /
• 2017

IPCC Guidelines have been updated after the first official announcement to get more precise estimation of GHG emissions. The goal of this study is to evaluate the implications of the IPCC Guidelines improvements including equations of country-specific parameter values for estimating GHG emissions for rice cultivation on the agricultural sector. In addition, we analyze the effects of emission factors associated with organic amendment applications. The results of this study are as follows; (1) the total GHG emissions of rice cultivation based on 1996 IPCC GL are 28% lower than those estimated by 2006 IPCC GL with the same year data; (2) GHGs can be reduced up to 60% through the assumption of organic fertilizer applications; (3) Jeonnam and Chungnam are the worst regions for GHG emissions on rice cultivation and Chungbuk shows the highest reduction rate of GHG emissions, about 40%.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.331-334
• /
• 2007

Wind turbine is composed by 3 major parts, rotor ass'y, nacelle ass'y and tower. There are two major point in nacelle cover analysis one is nacelle cover itself the other is cover support structure. Both of them are required strength proof with light weight. For the design of structure, the loads are calculated according to GL wind guideline Ed. 2003 and by the commercial F.E. codes,

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.295-298
• /
• 2008

The major function of the nacelle cover is protecting the inside equipments. Therefore, it is required not only sufficient strength and stability but also light weight. In this paper, design loads are calculated according to the GL Wind guideline Ed. 2003. To ensure the structural safety, a composite structure is selected. The structural design is processed by two steps which are preliminary design and detail design. In the preliminary design step, a structural analysis is performed with initial thickness, 5mm. As reviewing above analysis results, weak regions of the nacelle cover reinforced using the spar cap structure which is same as the blade structure. In the analysis model, the support structure is connected with the nacelle cover and analyzed its structural safety at the same time.

• Journal of Wind Energy
• /
• v.5 no.1
• /
• pp.43-49
• /
• 2014

Primarily, tower loads of a wind turbine arise from aerodynamic effect and a top head mass. But sometime asymmetric loads of rotor also affect on the tower loads. Especially ice formation on two blades out of three causes the asymmetric loads, because the ice formation on blades lead to large rotating mass imbalance. This rotating mass imbalance of rotor affects tower fatigue loads. So design load cases of ice formation on blade should be considered in the fatigue design loads of the tower according to GL guideline 2010. This paper describes the change of tower fatigue loads following increase of tower height in the condition of ice formation. Finally, the optimal operation strategy is examined in order to reduce tower fatigue design loads.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.107-116
• /
• 2021

In this study, an analytical method was developed for estradiol-17��, testosterone, and progesterone, which are growth promoters as veterinary drug residues in animal food. The analytes were separated using liquid chromatography, and was injected into a mass spectrometer through the electrospray ionization(ESI) process and detected in multiple reaction monitoring(MRM) mode. As the method was validated by CODEX CAC/GL 71-2009 guideline, it met the acceptable. The analysis of beef, pork, and chicken distributed in Korea was conducted with an established method to confirm the applicability of the actual sample. It was confirmed that the developed method can be quickly and reliably in the analysis for the growth promoters identified in domestic distributed livestock products. Through subsequent research, a highly utilized analysis method will be completed if the number of growth promoters is expanded based on the method and the simultaneous analytical method is established by including all of it.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.321-331
• /
• 2019

BACKGROUND: Pinoxaden is the phenylpyrazoline herbicide developed by Syngenta Crop Protection, Inc. and marketed on 2006. The maximum residue levels for wheat and barley were set by import tolerance. Thus, Ministry of Food and Drug Safety (MFDS) official analytical method determining Pinoxaden residue was necessary in various food matrixes. Satisfaction of international guideline of CODEX (Codex Alimentarius Commission CAC/GL 40) and National Institute of Food and Drug Safety Evaluation-MFDS (2017) are additional pre-requirements for analytical method. In this study, liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was investigated to analyze residue of Pinoxaden (M4), which is defined as pesticide residue in Korea, in foods. METHODS AND RESULTS: Pinoxaden (M4) was extracted followed by acid digestion (2hr reflux with 1N HCl) and pH adjusting (pH 4-5 with 3% ammonium solution). To remove oil, additional clean-up step with hexane saturated with acetonitrile was required to high oil contained sample before purification. HLB cartridge and nylon syringe filter were used for purification. Then, samples were analyzed by LC-MS/MS using reserve phase column C₁₈. Five agricultural group representative commodities (mandarin, potato, soybean, hulled rice, and red pepper) were used to verify the method in this study. The liner matrix-matched calibration curves were confirmed with coefficient of determination (r²) > 0.99 at calibration range 0.002-0.2 mg/kg. The limits of detection and quantitation were 0.004 and 0.01 mg/kg, respectively, which were suitable to apply Positive List System (PLS). Mean average accuracies of pinoxaden (M4) were shown to be 74.0-105.7%. The precision of pinoxaden and its metabolites were also shown less than 14.5% for all five samples. CONCLUSION: The method investigated in this study was suitable to CODEX (CAC/GL 40) and National Institute of Food and Drug Safety Evaluation-MFDS (2017) guideline for residue analysis. Thus, this method can be useful for determining the residue in various food matrixes in routine analysis.