• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.25-38
• /
• 2021

Purpose: To reduce the damage caused by continuously occurring typhoons, we proposed a standardized grid so that it could be actively utilized in the prevention and preparation stage of typhoon response. We established grid-based convergence information on the typhoon risk area so that we showed the effectiveness of information used in disaster response. Method: To generate convergent information on typhoon hazard areas that can be useful in responding to typhoon situation, we used various types of data such as vector and raster to establish typhoon hazard area small grid-based information. A standardized grid model was applied for compatibility with already produced information and for compatibility of grid information generated by each local government. Result: By applying the grid system of National branch license plates, a grid of typhoon risk areas in Seoul was constructed that can be usefully used when responding to typhoon situations. The grid system of National branch license plates defines the grid size of a multi-dimensional hierarchical structure. And a grid of typhoon risk areas in Seoul was constructed using grids of 100m and 1,000m. Conclusion: Using real-time 5km resolution grid based weather information provided by Korea Meteorological Administration, in the future, it is possible to derive near-future typhoon hazard areas according to typhoon travel route prediction. In addition, the national branch number grid system can be expanded to global grid systems for global response to various disasters.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.3
• /
• pp.12-21
• /
• 2011

We investigated the location and surveillance system of fortress using inter-visibility analysis between fortress and the capital of the Silla Dynasty. The digital terrain model(DTM) was generated with $10{\times}10m$ grid in Arcview 3.2. Then three fortresses lines(Myeonghwal-sanseong, Namsan-shinseong, Seohyeong-sanseong) were superimposed on the DTM. 4 results of this study were drew out from the cumulative visibility analysis. First, the most of fortress lines which showed the high visible frequency from the Sila-Capital(538 viewpoints) have a good aspect toward the capital. It means that 3 fortresses secured the visibility to the capital. Second, the cumulative visibility analysis from 3 fortresses generated evenly distributed visible frequency across the inside of fortress. It shows that the inner area of fortress is more advantageous to command during the war. On the contrary, a number of invisible(vulnerable) regions which is scattered on the outside were supplemented by adjacent fortress. Third, the north area of the Sila-captial showed the highest visible frequency generated by sum up the visibility from 3 fortresses. The northern captial is placed within 4km distance easy to support at the Myeonghwal and Seohyeong-sanseong. We proved that the Sila-capital had organized a solid surveillance system by 3 fortresses. Fourth, we could infer the practical process of fortress layout from comparing a cumulative visibility map. For the secure of visibility and defense systems, the fortress line would form a rising shape to the peak. This practical location theory can replace the vague common location theory that the fortress would constructed on two thirds of mountain height. It will be an empirical method in the ancient remains research.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.2
• /
• pp.93-101
• /
• 2021

Recently, with the urban redevelopment and the spread of the planned cities, there is increasing interest in the wind environment, which is related not only to design of buildings and landscaping but also to the comfortability of pedestrians. Numerical analysis for wind environment prediction is underway in many fields, such as dense areas of high-rise building or composition of the apartment complexes, a precisive 3D building model is essentially required in this process. Many studies conducted for wind environment analysis have typically used the method of creating a 3D model by utilizing the building layer included in the GIS (Geographic Information System) data. These data can easily and quickly observe the flow of atmosphere in a wide urban environment, but cannot be suitable for observing precisive flow of atmosphere, and in particular, the effect of a complicated structure of a single building on the flow of atmosphere cannot be calculated. Recently, drone photogrammetry has shown the advantage of being able to automatically perform building modeling based on a large number of images. In this study, we applied photogrammetry technology using a drone to evaluate the flow of atmosphere around two buildings located close to each other. Two 3D models were made into an automatic modeling technique and manual modeling technique. Auto-modeling technique is using an automatically generates a point cloud through photogrammetry and generating models through interpolation, and manual-modeling technique is a manually operated technique that individually generates 3D models based on point clouds. And then the flow of atmosphere for the two models was compared and analyzed. As a result, the wind environment of the two models showed a clear difference, and the model created by auto-modeling showed faster flow of atmosphere than the model created by manual modeling. Also in the case of the 3D mesh generated by auto-modeling showed the limitation of not proceeding an accurate analysis because the precise 3D shape was not reproduced in the closed area such as the porch of the building or the bridge between buildings.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.1
• /
• pp.103-116
• /
• 2021

The purpose of this study is to analyze and diagnose the actual state of extinction risk in rural villages by analyzing time series population characteristics and extinction risk index of rural villages(Haengjeong-ri). As a research method, a time series analysis was performed on the 'population over 65' and the 'female population aged 20 to 39' related to the local extinction index. In addition, the disappearance of Haengjeong-ri village was analyzed using the existing local extinction index. For the study, Haengjeong-ri village-level GIS spatial data was constructed, and population attribute data in 2010, 2015, and 2020 were constructed. In order to derive implications, the change of the 'high risk of extinction 'village in the 2020 local extinction index, the distribution of the population of 'high risk of extinction' villages by three years, the population analysis of 'high risk of extinction' villages continuously from 2010 to 2020, and 'high risk of extinction' An analysis of the increase and decrease of the population of the village and the change of the local extinction index of Haengjeong-ri, where the city, county, and towns are located were analyzed. As a result of the analysis of this study, it was found that the number of villages with an aging of more than 50% increased by 2 to 3 times over 10 years. As a result of the analysis of the local extinction index, in 2010, the southwestern and central regions of South Chungcheongnam-do were high-risk extinction areas, but in 2020, all cities except Cheonan and Asan were converted to high risk extinction areas. Research has shown that Chungnam is facing a serious aging and village extinction crisis, and since the disappearance of villages gradually spreads, an initial response policy is needed. This result will be the same not only in Chungcheongnam-do but also in other rural villages. Therefore, in the case of rural villages, it is necessary to analyze and diagnose the Haengjeong-ri village unit, not the Eup-Myeon unit, and a response policy through diagnosis must be prepared urgently.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.4
• /
• pp.283-294
• /
• 2021

Solar radiation is an important meteorological factor in the agricultural sector. The ground exposed to sunlight is highly influenced by the surrounding terrains especially in South Korea where the topology is complex. The solar radiation on an inclined surface is estimated using a solar irradiance correction factor for the slope of the terrain along with the solar radiation on a horizontal surface. However, such an estimation method assumes that there is no barrier in surroundings, which blocks sunlight from the sky. This would result in errors in estimation of solar radiation because the effect of shading caused by the surrounding terrain has not been taken into account sufficiently. In this study, the shading effect was simulated to obtain the brightness value (BV), which was used as a correction factor. The shaded relief images, which were generated using a 30m-resolution digital elevation model (DEM), were used to derive the BVs. These images were also prepared using the position of the sun and the relief of the terrain as inputs. The gridded data where the variation of direct solar radiation was quantified as brightness were obtained. The value of cells in the gridded data ranged from 0 (the darkest value) to 255 (the brightest value). The BV analysis was performed using meteorological observation data at 22 stations installed in study area. The observed insolation was compared with the BV of each point under clear and cloudless condition. It was found that brightness values were significantly correlated with the solar radiation, which confirmed that shading due to terrain could explain the variation in direct solar radiation. Further studies are needed to accurately estimate detailed solar radiation using shaded relief images and brightness values.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.4
• /
• pp.55-70
• /
• 2021

In this study, in the field of remote sensing, where the scope of application is rapidly expanding to fields such as land monitoring, disaster prediction, facility safety inspection, and maintenance of cultural properties, monitoring of rural space and surrounding environment using UAV is utilized. It was carried out to verify the possibility, and the following main results were derived. First, the aerial image taken with an unmanned aerial vehicle had a much higher image size and spatial resolution than the aerial image provided by the National Geographic Information Service. It was suitable for analysis due to its high accuracy. Second, the more the number of photographed photos and the more complex the terrain features, the more the point cloud included in the aerial image taken with the UAV was extracted. As the amount of point cloud increases, accurate 3D mapping is possible, For accurate 3D mapping, it is judged that a point cloud acquisition method for difficult-to-photograph parts in the air is required. Third, 3D mapping technology using point cloud is effective for monitoring rural space and rural resources because it enables observation and comparison of parts that cannot be read from general aerial images. Fourth, the digital elevation model(DEM) produced with aerial image taken with an UAV can visually express the altitude and shape of the topography of the study site, so it can be used as data to predict the effects of topographical changes due to changes in rural space. Therefore, it is possible to utilize various results using the data included in the aerial image taken by the UAV. In this study, the superiority of images acquired by UAV was verified by comparison with existing images, and the effect of 3D mapping on rural space monitoring was visually analyzed. If various types of spatial data such as GIS analysis and topographic map production are collected and utilized using data that can be acquired by unmanned aerial vehicles, it is expected to be used as basic data for rural planning to maintain and preserve the rural environment.

• Journal of Korea Water Resources Association
• /
• v.55 no.2
• /
• pp.159-170
• /
• 2022

As the severity of water-related disasters increases in urban watersheds due to climate change, reducing flood damage in urban watersheds is one of the important issues. This study focuses on prioritizing the optimal site for permeable pavement to maximize the efficiency of reducing flood damage in urban watersheds in the future climate environment using multi-criteria decision making techniques. The Mokgamcheon watershed which is considerably urbanized than in the past was selected for the study area and its 27 sub-watersheds were considered as candidate sites. Six General Circulation Model (GCM) of Coupled Model Intercomparison Project 6(CMIP6) according to two Shared Socioeconomic Pathway (SSP) scenarios were used to estimate future monthly precipitation for the study area. The Driving force-Pressure-State-Impact-Response (DPSIR) framework was used to select the water quantity evaluation criteria for prioritizing permeable pavement, and the study area was modeled using ArcGIS and Storm Water Management Model (SWMM). For the values corresponding to the evaluation criteria based on the DPSIR framework, data from national statistics and long-term runoff simulation value of SWMM according to future monthly precipitation were used. Finally, the priority for permeable pavement was determined using the Fuzzy TOPSIS and Minimax regret method. The high priorities were concentrated in the downstream sub-watersheds where urbanization was more progressed and densely populated than the upstream watersheds.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.3
• /
• pp.59-73
• /
• 2022

Currently, the conflict between use and conservation of the ocean is intensifying in the ocean, so it is essential to introduce an effective method to define and manage it in advance for each core value of ocean. Accordingly, although the ocean is divided into nine marine use zone and managed through marine spatial planning, the analysis of the sea areas where mutually exclusive activities overlap in the ocean is insufficient. In this study, an automated model was developed to derive a sea areas where the core values of the ocean conflict. In order to analyze marine activities, available data on marine activity were collected, and data necessity for the analysis of mutually exclusive marine activities were derived. After classifying the derived data into legal and characteristic data, a conflict matrix was prepared through pairwise comparison between data to designate priorities when overlapping occurs. Based on the designated priorities, an automation model was developed, and sea areas where marine activities conflicted were derived, visualized, and area calculated. Using this, it is judged that the efficiency of decision-making can be improved by clearly deriving the sea areas where major issues occur in establishing the marine spatial planning.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.1
• /
• pp.1-11
• /
• 2023

The comprehensive natural disaster reduction plan, the highest plan in the disaster prevention field, was implemented by local governments. second plan is currently being formulated. In order to minimize human and property damage, structural and non-structural measures for each of the nine disaster types are established and implemented for 10 years. Structural measures are based on engineering and quantitative analysis, and the criteria for setting reduction measures are clear. Non-structural measures, however, currently lack the set criteria. the basic disaster and safety management law included the safety vulnerable class in 2018. Currently, the safety vulnerable class of the detailed establishment criteria of the comprehensive natural disaster reduction plan is being established, including children, the elderly, and the disabled. However, due to the lack of data securing and database construction by local governments, it is difficult to prepare a location map for establishing reduction measures for the safety vulnerable. Therefore, in this study, OPEN API data of the safety vulnerable class were collected and statistical information and GIS of SGIS information services were used. The distribution diagram of the safety vulnerable class in Samcheok, Gangwon-do, which is a sample area, and the distribution diagram of the safety vulnerable class in units of the output area (OA) in Geundeok-myeon were prepared.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.2
• /
• pp.5-18
• /
• 2023

As the development of drones and sensors accelerates, new services and values are created by fusing data acquired from various sensors mounted on drone. However, the construction of spatial information through data fusion is mainly constructed depending on the image, and the quality of data is determined according to the specification and performance of the hardware. In addition, it is difficult to utilize it in the actual field because expensive equipment is required to construct spatial information of high-quality. In this study, super-resolution was performed by applying deep learning to low-resolution images acquired through RGB and THM cameras mounted on a drone, and quantitative evaluation and feature point extraction were performed on the generated high-resolution images. As a result of the experiment, the high-resolution image generated by super-resolution was maintained the characteristics of the original image, and as the resolution was improved, more features could be extracted compared to the original image. Therefore, when generating a high-resolution image by applying a low-resolution image to an super-resolution deep learning model, it is judged to be a new method to construct spatial information of high-quality without being restricted by hardware.