• 대한토목학회논문집
• /
• 제30권2A호
• /
• pp.137-148
• /
• 2010

본 연구에서는 기존 엑스트라도즈드교와 PSC 사장교 사이의 영역인 주탑고비 1/6~1/7의 고주탑을 적용하여 엑스트라도즈드교의 구조적, 경제적 특성을 평가하였다. 주탑고가 증가함에 따라 사재의 연직하중 분담율의 증가와 함께 변동응력도 증가하여 사재의 피로안정성이 주요 설계변수임을 알 수 있었다. 국내에서는 엑스트라도즈드교의 설계기준 부재로 인하여 일본 설계기준을 준용하고 있다. 또한, 피로 검토하중도 정립되지 않고 있어 본 연구에서는 일본 피로 검토하중에 대응하는 국내 활하중을 적용 검토하여 DL24 하중이 피로 검토하중으로 적정함을 알 수 있었다. 제시된 피로 검토하중을 적용하여 주탑고, 주거더의 강성, 케이블 면수 등을 매개변수로 엑스트라도즈드교의 구조적, 경제적 특성을 검토하였다. 본 연구의 결과로써 일면 케이블 배치가 이면 케이블 배치보다 경제적임을 알 수 있었다. 또한, 주탑고비가 1/6의 변단면 고주탑 엑스트라도즈교에서 연직 하중분담율이 30~50% 이내로 모든 사재가 허용변동응력 이내로 들어와 사재를 효율적으로 사용할 수 있어 가장 경제적임을 알 수 있었다. 본 연구를 통해 기존의 엑스트라도즈드교보다 높은 주탑고를 적용함에 따라 구조적, 경제적으로 효율성을 높일 수 있음을 확인하였다.

• 대한토목학회논문집
• /
• 제28권4A호
• /
• pp.487-495
• /
• 2008

본 연구에서는 압출가설시 압출노즈와 가설거더 시스템의 거동에 대한 압출노즈의 휨강성비, 단위중량비 및 길이비의 영향을 살펴보고, 압출과정에서 발생하는 부모멘트 및 정모멘트를 최소화할 수 있는 압출노즈에 대한 최적조건을 도출하고자 하였다. 또한, 도출된 최적조건을 사용하여 압출노즈의 단위중량비와 길이비의 관계식을 유도하고 압출가설시에 발생하는 절대최대 정모멘트 및 부모멘트의 산정식을 제시하였으며, 연속거더교량의 압출가설시에 사용되는 압출노즈의 최적설계 방안을 제안하였다. 가장 이상적인 압출노즈의 설계는 절대최대 부모멘트를 최소화하면서 절대최대 정모멘트의 발생을 억제할 수 있는 단위중량비 0.167, 길이비 0.836을 적용한 경우임을 확인하였다.

• 대한토목학회논문집
• /
• 제26권3A호
• /
• pp.485-496
• /
• 2006

시스템 탄성/비탄성 좌굴 고유치해석과 2차 탄성해석을 이용한 사장교 주요부재의 개선된 좌굴설계법을 제안하고, 사장교 설계예제를 통하여 활하중의 영향을 고려한 주형 및 주탑의 유효좌굴길이를 산정하여 이것이 좌굴 안정성에 미치는 영향을 조사한다. 이를 위하여 먼저 초기형상해석법(김 등, 2003)을 이용하여 사장교의 초기치를 결정한다. 이때 케이블 장력을 포함하는 사장교의 주형 및 주탑의 축력에 의한 좌굴해석을 통하여 유효좌굴길이를 산정한다. 그리고 활하중효과가 최대가 되는 하중조합에 대하여 2차 탄성해석법으로 P-Delta 효과를 고려한 휨모멘트를 산정한다. 마지막으로 설계예제를 통하여 현행안정성 검토식과 본 연구에서 제시하는 개선된 안정성 검토식(안)을 비교, 분석한다.

• 대한토목학회논문집
• /
• 제29권2D호
• /
• pp.295-303
• /
• 2009

본 연구에서는 가이드웨이의 특성이 중저속 자기부상열차의 주행성에 미치는 영향을 파악하는데 목적을 두고 있다. 이를 위하여 자기 공극의 피드백을 포함한 2자유도 차량에 대한 운동방정식을 구성하고, 최적능동제어기법을 적용하여 수치해석을 수행하였다. 매개변수 연구로 차량 속도, 레일조도, 교량 처짐, 경간의 연속성, 경간장 등이 UTM-01 자기부상열차의 응답에 미치는 영향을 파악하였다. 해석 결과를 보면, 차량 설계속도 내에서는 차량의 응답이 크게 증가하지 않고 일정한 수준을 유지하였으며, 차량의 응답은 주로 가이드웨이 처짐에 의하여 지배를 받은 것으로 나타났다. 결론적으로 차량 공극의 변화를 줄여서 주행성을 향상시키려면 가이드웨이의 최대 처짐을 작게 하고, 단순거더 보다는 연속거더 구조로 구성하는 것이 유리한 것으로 나타났다.

• 대한토목학회논문집
• /
• 제30권3A호
• /
• pp.257-264
• /
• 2010

일반적으로 대형구조물의 건전성평가에 있어 중요한 인자인 변위를 추정함으로써 구조물의 성능 저하 및 노후도를 판단하는 근거가 된다. 그러나 변위응답의 계측이 중요함에도 불구하고 계측 방법의 부재로 말미암아 현수교와 같은 대형구조물의 변위응답을 측정하는 방법이 용이치 않은 것이 현실이다. 본 논문에서는 변형률신호로부터 변위응답을 추정하는 방법인 모드분해기법을 제시하였다. 모드분해기법은 등가정적 변위응답과 구조물의 주요거동을 나타내는 저차모드의 변위응답을 합하여 최종변위응답을 추정하는 방법이다. 변형률신호의 계측시 전기저항식 변형률센서를 사용할 경우 전기적 노이즈 문제가 발생할 소지가 크며, 측점이 많아질수록 경제적 부담감이 커진다. 이런 문제점을 극복하기 위하여 전기적 노이즈의 영향이 없고 다중측정이 가능한 광섬유 브래그 격자 센서를 사용하였다. 현수교와 플레이트거더교의 동재하실험을 통하여 모드분해기법의 사용성을 검토하였다.

• Steel and Composite Structures
• /
• 제45권2호
• /
• pp.159-173
• /
• 2022

This paper proposes a hybrid machine-learning model, which is called DANN-IP, that combines a deep artificial neural network (DANN) and an interior-point (IP) algorithm in order to improve the prediction capacity on the patch loading resistance of steel plate girders. For this purpose, 394 steel plate girders that were subjected to patch loading were tested in order to construct the DANN-IP model. Firstly, several DANN models were developed in order to establish the relationship between the patch loading resistance and the web panel length, the web height, the web thickness, the flange width, the flange thickness, the applied load length, the web yield strength, and the flange yield strength of steel plate girders. Accordingly, the best DANN model was chosen based on three performance indices, which included the R^2, RMSE, and a20-index. The IP algorithm was then adopted to optimize the weights and biases of the DANN model in order to establish the hybrid DANN-IP model. The results obtained from the proposed DANN-IP model were compared with of the results from the DANN model and the existing empirical formulas. The comparison showed that the proposed DANN-IP model achieved the best accuracy with an R^2 of 0.996, an RMSE of 23.260 kN, and an a20-index of 0.891. Finally, a Graphical User Interface (GUI) tool was developed in order to effectively use the proposed DANN-IP model for practical applications.

• Smart Structures and Systems
• /
• 제30권5호
• /
• pp.479-500
• /
• 2022

In this study, a new type of isolation bearing is proposed by combining S-shaped steel plate dampers (SSDs) with a spherical steel bearing, and the seismic control effect of a five-span standard high-speed railway bridge is investigated. The advantages of the proposed S-shaped steel damping friction bearing (SSDFB) are that it cannot only lengthen the structural periods, dissipate the seismic energy, but also prevent bridge unseating due to the restraint effectiveness of SSDs in the large relative displacements between the girders and piers. This study first presents a detailed description and working principle of the SSDFB. Then, mechanical modeling of the SSDFB was derived to fundamentally define its cyclic behavior and obtain key mechanical parameters. The numerical model of the SSDFB's critical component SSD was verified by comparing it with the experimental results. After that, parameter studies of the dimensions and number of SSDs, the friction coefficient, and the gap length of the SSDFBs were conducted. Finally, the longitudinal seismic responses of the bridge with SSDFBs were compared with the bridge with spherical bearing and spherical bearing with strengthened shear keys. The results showed that the SSDFB can not only significantly mitigate the shear force responses and residual displacement in bridge substructures but also can effectively reduce girder displacement and prevent bridge unseating, at a cost of inelastic deformation of the SSDs, which is easy to replace. In conclusion, the SSDFB is expected to be a cost-effective option with both multi-stage energy dissipation and restraint capacity, making it particularly suitable for seismic isolation application to high-speed railway bridges.

• Wind and Structures
• /
• 제37권6호
• /
• pp.399-412
• /
• 2023

Previous studies have shown that the integrated transfer function (ITF) is independent of turbulence characteristics and can be effectively applied to predict the buffeting response of elongated structures, assuming that the strip hypothesis is valid. However, existing research has not effectively identified the ITF through segment model vibration tests, and the influence of the 3D effect on the accuracy of the strip hypothesis and the characteristics of the ITF in wind tunnel tests has not been quantitatively studied. A segment model vibration measurement device that can change a test model's span-width ratio was designed in this study. An airfoil section and a streamlined box girder section structure were taken as the background, and their ITFs were effectively identified under different L/B (L denotes the turbulent integral scale and B denotes the structural width) and model span-width ratios. The influence laws of the 3D effect on the accuracy of the strip hypothesis and ITF identification in wind tunnel tests were systematically investigated. The results showed that L/B and the structural span-width ratio are two significant controlling factors that affect the accuracy of the strip hypothesis and ITF identification. The research provides an effective experimental method for accurately predicting the buffeting response of elongated structures based on ITFs identified through segment model vibration tests.

• Smart Structures and Systems
• /
• 제33권3호
• /
• pp.189-199
• /
• 2024

To properly extract the strain components under varying operational conditions is very important in bridge health monitoring. The abnormal sensor readings can be correctly identified and the expected operational performance of the bridge can be better understood if each strain components can be accurately quantified. In this study, strain components under varying load conditions, i.e., temperature variation and live-load variation are evaluated based on field strain measurements collected from a real concrete box-girder bridge. Temperature-induced strain is mainly regarded as the trend variation along with the ambient temperature, thus a smoothing technique based on the wavelet packet decomposition method is proposed to estimate the temperature-induced strain. However, how to effectively extract the vehicle-induced strain is always troublesome because conventional threshold setting-based methods cease to function: if the threshold is set too large, the minor response will be ignored, and if too small, noise will be introduced. Therefore, an autoencoder framework is proposed to evaluate the vehicle-induced strain. After the elimination of temperature and vehicle-induced strain, the left of which, defined as the model error, is used to assess the operational performance of the bridge. As empirical techniques fail to detect the degraded state of the structure, a clustering technique based on Gaussian Mixture Model is employed to identify the damage occurrence and the validity is verified in a simulation study.

• Wind and Structures
• /
• 제38권6호
• /
• pp.427-443
• /
• 2024

By using a computational program of three-dimensional aerostatic and aerodynamic stability analysis of long-span bridges under skew wind, the dynamic characteristics and structural stability(including the aerostatic and aerodynamic stability) of a three-tower cable-stayed-suspension hybrid bridge with main span of 1 400 meters are investigated numerically under skew wind, and the skew wind and aerostatic effects on the aerostatic and aerodynamic stability of three-tower cable-stayedsuspension hybrid bridge are ascertained. The results show that the three-tower cable-stayed-suspension hybrid bridge is a longspan structure with greater flexibility, and it is more susceptible to the wind action. The aerostatic instability of three-tower cable-stayed-suspension hybrid bridges is characterized by the coupling of vertical bending and torsion of the girder, and the skew wind does not affect the aerostatic instability mode. The skew wind has positive or negative effects on the aerostatic stability of the bridge, the influence is between -5.38% and 4.64%, and in most cases, it reduces the aerostatic stability of the bridge. With the increase of wind yaw angle, the critical wind speed of aerostatic instability does not vary as the cosine rule as proposed by the skew wind decomposition method, the skew wind decomposition method may overestimate the aerostatic stability, and the maximum overestimation is 16.7%. The flutter critical wind speed fluctuates with the increase of wind yaw angle, and it may reach to the minimum value under the skew wind. The skew wind has limited effect on the aerodynamic stability of three-tower cable-stayed-suspension hybrid bridge, however the aerostatic effect significantly reduces the aerodynamic stability of the bridge under skew wind, the reduction is between 3.66% and 21.86%, with an overall average drop of 11.59%. The combined effect of skew and static winds further reduces the critical flutter wind speed, the decrease is between 7.91% and 19.37%, with an overall average decrease of 11.85%. Therefore, the effects of skew and static winds must be comprehensively considered in the aerostatic and aerodynamic stability analysis of three-tower cable-stayed-suspension hybrid bridges.