• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.4
• /
• pp.503-510
• /
• 2003

A new method of induction motor drive, which requires neither shaft encoder nor speed estimator, is presented. The proposed scheme is based on decreasing current gap between a numerical model and an actual motor. By supplying the identical instantaneous voltage to both model and motor in the direction of reducing the current difference. the rotor approaches to the model speed. that is. reference value. The indirect field orientation algorithm is employed for tracking the model currents. The performance of induction motor drives without speed sensor is generally characteristic of poorness at very low speed. However, in this system, it is possible to obtain good speed response in the extreme low speed range.

• Journal of Food Hygiene and Safety
• /
• v.4 no.3
• /
• pp.257-261
• /
• 1989

In order to evaluate the characteristics and quality of various Korean alcoholic beverage, the higher alcohols profiles were analyzed by gas-chromatography. Total amount of the higher alcohols depended on the type and class of the liquors. Gaschromatographic analysis showed that the type of Gin, Rum and Vodka except for SB contain n-propanol mainly. The amount of the higher alcohols determined was proportional to the content of the originally fermented liquor in the whisky. The difference in the ratio of iso-amyl alcohol content to that of iso-butanol may be useful as a parameter in evaluating the class of the whisky.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2005.04a
• /
• pp.254-255
• /
• 2005

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.594-596
• /
• 2003

Due to the fact that the composition and variability of aerosols is considered rather complex, it is difficult to employ a simple and straightforward physical model in calculating the aerosol size distribution in the absence of actual data. This complicates the already difficult retrieval of various atmospheric parameters from remotely sensed data. Thus, the main purpose of this study is trying to find an effective aerosol size coefficient that is stable, and can depict the particle size distribution. This paper also attempts to construct an 'effective aerosol size coefficient' database for each respective season, where it can quickly and effectively supply pertinent information of the atmosphere's opacity.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.565-569
• /
• 2002

To improve the driving sensitivity of an optical pickup actuator for high density and high speed drive, we present a new actuator design using multipolar flux-density distribution by magnetic materials and Nd-Fe-B sintered magnets. We expect this actuator to use in 3-axis actuator for tilt compensation as well as conventional 2-axis actuator. The electromagnetic field analysis applying 3-D FEM was performed and several samples were actually tested. From comparing simulated data with experimental results, we verified the accuracy of the simulation and the superiority of the presented method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.638-641
• /
• 2000

The conventional motor in a crane has a tan generator to feed back the number of turns. The tan generator is contacted to a motor shaft through the coupling. Don has been often generated because the coupling has worn out while the motor is turning. In this paper, we design the speed-measurement device of motor in a un. The device is composed of PIC16F84 controller, photo-sensor, and analog-to digital converter. The photo sensor measures the turn of a motor without contact so the device decreases the probability of errors. And The device can acknowledge the turn direction of the motor with a gin81e senor and two color reflectors.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3C
• /
• pp.279-285
• /
• 2006

In this study, a new signal model suitable for UWB indoor environments with random angle spread is proposed to estimate the angle-of-arrivals(AOAs) of UWB cluster signals in an UWB wireless communication. A subspace based estimation technique adopted for this model is investigated and the estimates of the AOA and distribution parameter on the received UWB cluster signals are obtained. The proposed model and estimation technique are verified using computer simulations, and the performance of the estimation error is analyzed.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.771-773
• /
• 2001

In this paper, three dimensional Equivalent Magnetic Circuit Method(3-D EMCN method) a numerical analysis method which supplements to magnetic equivalent circuit adding numerical technique, is proposed for analysis Optical Pickup Actuator. (3) This method provides better characteristics both in precision of the analysis and in computation time than other analysis method such as three-dimensional Finite Element Method. We choose the simple 2-magnet moving coil type pickup actuator model and verify upper yoke effect using this method.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.3
• /
• pp.51-54
• /
• 2008

In this study, we investigated variations in undoped ZnO thin film properties with working pressure, $O_2$/Ar ratio, and annealing ambient. Higher vacuum pressure during deposition was observed to bring about slower growth rate resulting in samples with better crystallinity as well as hole generation efficiency through formation of shallower oxygen interstitial. Given that $O_2$/Ar ratio is greater than unity, O provided from the ambient to ZnO during annealing was found to preferably situate at interstitial sites. When He was used for the second annealing, significant changes were not observed. On the other hand, O ambient caused increased density of oxygen interstitial, thereby making the film more intrinsic-like high resistivity ZnO.

• Proceedings of the CALSEC Conference
• /
• 1999.07b
• /
• pp.607-614
• /
• 1999

In this paper, we demonstrate the implementation case using component based development tool under development process for application developments. The tool suggested provides the programming environment for the development of distributed manufacturing applications primarily. The development tool is classified into visual component, logic component, data component, knowledge component, neural net component, and service component which is a core component for the support component edit and execution. We applied the tool to the domain of the design and routing plan to retrieve existing similar design models in database, initiate a model, generate a process plan, and store the new model in the database automatically. Utilizing the tool, it integrates a geometric modeler, engineering/manufacturing database, and knowledge sources over the Internet.