• Journal of Life Science
• /
• v.14 no.3
• /
• pp.441-444
• /
• 2004

This study was performed to establish a simple and rapid method for measuring thrombin activity based on weight of fibrin clot formed. The new method was based on the weight measurement of fibrin clot after enzymatic reaction of thrombin with fibrinogen. The fibrin formation depended upon the activities of thrombin used, temperature, incubation time, and centrifugation time. The fibrin formation was increased proportionally up to 1.0 unit/ml of thrombin activity, 4.0mg/ml of fibrinogen concentration, and 5 min of incubation time at 37$^{\circ}C$. The fibrin clot formed was stable by centrifugation at 3,000$\times$g for 5min. This simple assay based on weight of fibrin after centrifugation would be useful for identifying natural food anticoagulants by inhibiting thrombin.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.37.1-37.1
• /
• 2010

The multi-component olivine cathode material, $LiMn_{1/3}Fe_{1/3}Co_{1/3}PO_4$, was prepared via a novel coprecipitation method of the mixed transition metal oxalate, $Mn_{1/3}Fe_{1/3}Co_{1/3}(C_2O_4){\cdot}2H_2O$. The stoichiometric ratio and distribution of transition metals in the oxalate, therefore, in the olivine product, was affected sensitively by the environments in the coprecipitation process, while they are the important factors in determining the electrochemical property of electrode materials with multiple transition metals. The effect of the pH, atmosphere, temperature, and aging time was investigated thoroughly with respect to the atomic ratio of transition metals, phase purity, and morphology of the mixed transition metal oxalate. The electrochemical activity of each transition metal in the olivine synthesized through this method clearly was enhanced as indicated in the cyclic voltammetry (CV) and galvanostatic charge/discharge measurement. Three distinctive contributions from Mn, Fe, and Co redox couples were detected reversibly in multiple charge and discharge processes. The first discharge capacity at the C/5 rate was $140.5\;mAh\;g^{-1}$ with good cycle retention. The rate capability test showed that the high capacity still is retained even at the 4C and 6C rates with 102 and $81\;mAh\;g^{-1}$, respectively.

• Korean Journal of Veterinary Research
• /
• v.36 no.3
• /
• pp.541-550
• /
• 1996

Tetracycline antibiotics have been widely used not only therapeutics but feed additives. There are many methods for the isolation and determination of tetracycline antibiotics in animal muscle tissue. But those methods take much time and labor, so it is difficult to analyse many samples simultaneously. A rapid isolation method and liquid chromatographic determination of tetracycline antibiotics in animal muscle tissue (bovine, porcine, chicken) is presented. Blank control and tetracyclines fortified samples (0.5g) were blended with $C_{18}$ containing 0.05g each of oxalic acid and disodium ethylenediaminetetraacetate. After homogenize, homogenate was transferred to glass column made from 10ml glass syringe and compressed to 4~4.5ml volume. A column made from the $C_{18}$/meat matrix was washed with hexane (8ml) and dichloromethane (8ml, if needed), following which the tetracyclines were eluted,vith methanol or 0.01M methanolic oxalic acid (8ml). The eluates containing tetracyclines analytes were free from interfering compounds when analysed by HPLC with UV detection (photodiode array at 360nm). Standard curve for each tetracycline showed a linear response at the range of $0.05{\sim}1.0{\mu}g/ml$ and tetracycline antibiotics were eluted within 4ml of eluted volume. All tetracycline antibiotics except tetracycline were stable during the concentration process at $40^{\circ}C$ and time required for concentration was 3~4 hours. Fortified samples containing oxalic aicd and EDTA represented more good recoveries than those of not-contained sample. Recoveries were 91.8~110.1% (oxytetracycline; OTC), 57.7~79.5% (tetracycline; TC), 78.1~88.6% (chlortetracyclines; CTC) and 88.4~100.6% (doxycycline; DC) in pork tissue, 101.1~126.8% (OTC), 66.4~75.4% (TC), 79.2~88.1% (CTC) and 69.3~86.7% (DC) in beef tissue, and 90.8~95.6% (OTC), 66.2~84.4% (TC), 75.7~77.2% (CTC) and 55.6~80.7% (DC) in chicken muscle tissue. The detection limits validated in muscle tissue by this method were $0.05{\mu}g/g$ for OTC and TC, and $0.1{\mu}g/g$ for CTC and DC.

• Journal of the Korean Chemical Society
• /
• v.18 no.5
• /
• pp.320-328
• /
• 1974

It is unable to derive the standard emf ($E^{\circ}$) of the cell at high pressure from the conventional method. However, when the concept of the complete equilibrium constant($K{\circ})$) is available to the conventional Nernst equation, it is possible to get the standard emf of the cell at high pressure(complete Nernst equation). Moreover, the other thermodynamic properties, such as the net change of solvation number(k), the compressibility of solvent(${\beta}$), ionization constant(K), the standard free energy change(${\Delta}G^{\circ}$), the standard enthalpy change(${\Delta}H^{\circ}$) and the standard entropy change (${\Delta}S^{\circ}$) of the cell reaction at equilibrium state have been also obtained. In this experiment, the emf of the cell; 12.5 % Cd(Hg)│$CdSO_4(3.105{\times}10^{-3}M),\;Hg_2SO_4│Hg$ have bee measured at temperature from 20 to $35^{\circ}C$ and at pressures from 1 to 2500 atms. The emf of the cell increased with increasing pressure at constant temperature, and did with increasing temperature at constant pressure. The net change of solvation number(k) of the cell reaction was 41.96 at $25^{\circ}C$, and kept constant value with pressure, while, K and ${\Delta}S^{\circ}$ increased with pressure, but whereas ${\Delta}G^{\circ}$ and ${\Delta}H^{\circ}$ decreased. Since the standard emf of the cell at high pressure can be calculated from the complete Nernst equation, the theory of chemical equilibrium could be developed with at high pressure as well as at the atmosphere.

• Journal of Mushroom
• /
• v.12 no.4
• /
• pp.299-303
• /
• 2014

This study was to comparative analysis that different methods of extraction about total sugar content which the major functional components of edible and medicinal mushrooms. Through the phenol-sulfuric acid method was measured that Hot water extraction, acid extraction, and alkaline extraction. Drawing the standard curve to obtain the concentration of the glucose solution and the sample by applying the measured absorbance on the standard curve. Total sugar contents was measured after extraction with different solvents.(Hot water, 70% EtOH, 80% MeOH). The level of total sugar in Cordyceps militaris is highest in the hot water extraction with 658.4(${\mu}g/g$) and Coriolus versicolor in 649.7(${\mu}g/g$) and 679.0(${\mu}g/g$) was found as the highest in the acid extraction and the alkaline extraction. C. militaris and ASI 7025 showed the highest level in the hot water extraction. Finally, C. versicolor, Sparassis crispa showed that higher than the other mushrooms at the 1hr, 2hr microwave extraction. It was varied total sugar content according to the different extraction solvent and the extraction method.

• Reproductive and Developmental Biology
• /
• v.35 no.1
• /
• pp.93-97
• /
• 2011

Previously, we reported that the osmolarity conditions in the satellite region were affected CpG DNA methylation status while Pre-1 sequence was not affected CpG DNA methylation in pNT blastocyst stage. This study was conducted to investigate the DNA methylation status of repeat sequences in pig nuclear transfer (pNT) embryos produced under different osmolarity culture conditions. Control group of pNT embryos was cultured in PZM-3 for six days. Other two treatment groups of pNT embryos were cultured in modified PZM-3 with 138 mM NaCl or 0.05 M sucrose (mPZM-3, 320 mOsmol) for two days, and then cultured in PZM-3 (270 mOsmol) for four days. The DNA methylation status of the Pre-1 sequences in blastocysts was characterized using a bisulfite-sequencing method. Intriguingly, in the present study, we found the unique DNA methylation at several non-CpG sequences at the Pre-1 sequences in all groups. The non-CpG methylation was hypermethylated in all three groups, including in vivo group (86.90% of PZM-3; 83.87% of NaCl; 84.82% of sucrose; 90.94% of in vivo embryos). To determine whether certain non-CpG methylated sites were preferentially methylated, we also investigated the methylation degree of CpA, CpT and CpC. Excepting in vivo group, preference of methylation was CpT>CpC>CpA in all three groups investigated. These results indicate that DNA methylation of Pre-1 sequences was hypermethylated in CpG as well as non-CpG site, regardless modification of osmolarity in a culture media.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.6
• /
• pp.497-503
• /
• 2014

In order to produce the high quality of dried-ear mushroom, various drying methods such as hot-air drying at $40{\sim}80^{\circ}C$, freeze drying and drying in vinyl house were carried out. Drying hours of hot-air drying, freeze drying and drying in vinyl house were 12.5~21.5, 36.0 and 72.0 hrs, respectively. Vitamin $D_2$ content of sample was the highest as $6.77{\mu}g/g$ DW in drying in vinyl house and then followed by freeze drying as $5.90{\mu}g/g$ DW and hot-air drying as $1.89{\sim}5.01{\mu}g/g$ DW. After dry, external appearance and color of mushrooms applied hot-air drying and drying in vinyl house were better than freeze-dried one. After rehydration, water uptake of sample in drying in vinyl house and hot-air drying at $50{\sim}60^{\circ}C$ were 17.8 and 19.3~21.0 times, respectively. The methods of drying in vinyl house and hot-air drying at $50{\sim}60^{\circ}C$ also led to high hardness, good shape and resilience. As the results of production of dried-ear mushroom with high quality, we suggest that the best method for drying is the drying in vinyl house due to not only high vitamin $D_2$ content, good external appearance and color after drying but also high hardness and good shape after rehydration.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.157-160
• /
• 2008

색온도 및 광색 가변형 100W RGBY LED 투광기를 개발하기 위하여, 투광기의 광학 및 방열기구를 설계하였다. 또한 100W LED 광원모듈을 구동하기 위한 구동회로와 색온도 및 광색 가변을 위한 제어회로를 개발하였다. 이와 같은 설계결과를 적용하여 100W RGBY 투광기의 시제품을 제작하였고, 시제품의 광학적 성능은 협각 $20^{\circ}$, 중각 $50^{\circ}$, 광각 $75^{\circ}$이상을 만족시켰다. 또한 색온도의 변화는 CIE 1931 색좌표에서 흑체궤적과 일치하여 $2,000K{\sim}10,000K$까지 변화하도록 R,G,B,Y LED의 Duty Ratio를 설정하였다. 또한 방열 특성은 100W 구동시 녹색 LED의 온도는 $37{\sim}41.3^{\circ}C$, heatsink의 온도는 $34{\sim}35^{\circ}C$에서 동작되도록 하였다.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.1035-1039
• /
• 1995

Synthetic zeolite was prepared by using of natural bentonite from Kampo area and the application of detergent builder was investigated. The optimum synthetic condition was SiO$_2$/Al$_2$O$_3$= 2, Na$_2$O/A1$_2$O$_3$=1, H$_2$O/A1$_2$O$_3$=30 at 90$^{\circ}C$ for 3hr and it was found by XRD analysis that the zeolite synthesized under this condition was type A. When the zeolite A synthesized under the optimum condition was contacted with 40$^{\circ}$Dh CaCl$_2$solution at 30$^{\circ}C$ for 15min, the cation exchange capacity was 264.9mg CaO/g-zeolite. And the whiteness of the sample was 89% and the mean particle size was 9.95$\mu\textrm{m}$.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.1
• /
• pp.45-55
• /
• 2018

Environmentally benign lead-free solder coated ribbon (e. g. SnCu, SnZn, SnBi${\cdots}$) has been intensively studied to interconnect cells without lead mixed ribbon (e. g. SnPb) in the crystalline silicon(c-Si) photovoltaic modules. However, high melting point (> $200^{\circ}C$) of non-lead based solder provokes increased thermo-mechanical stress during its soldering process, which causes early degradation of PV module with it. Hence, we proposed low-temperature conductive paste (CP) based tabbing method for lead-free ribbon. Modules, interconnected by the lead-free solder (SnCu) employing CP approach, exhibits similar output without increased resistivity losses at initial condition, in comparison with traditional high temperature soldering method. Moreover, 400 cycles (2,000 hour) of thermal cycle test reveals that the module integrated by CP approach withstands thermo-mechanical stress. Furthermore, this approach guarantees strong mechanical adhesion (peel strength of ~ 2 N) between cell and lead-free ribbons. Therefore, the CP based tabbing process for lead free ribbons enables to interconnect cells in c-Si PV module, without deteriorating its performance.