• 콘크리트학회논문집
• /
• 제28권3호
• /
• pp.289-298
• /
• 2016

휨강도 및 연성이 부족한 철근콘크리트 원형 기둥의 섬유를 사용한 내진보강에 대하여 실험적 연구를 수행하였다. 일정한 축력을 받는 4개 기둥의 횡 방향 유사동적 실험에서 변수는 GF, PET 및 PET+GF 혼합 보강(HF) 등 섬유의 종류이었다. 이 연구에 적용한 PET는 인장강도(600 MPa 이상)가 우수하고 고연성(약 15%)이나, 탄성계수가 GF의 1/6 수준으로 매우 낮다. 기둥 실험 결과, 모든 보강 기둥은 컨트롤 기둥보다 7~20% 증가한 휨강도를 보였고, 연성은 1.6~1.8배로 증가하였다. 무보강 기둥은 주근 좌굴, GF 및 HF 보강 기둥의 최종 파괴모드는 GF 파단이었으나, 고연성 PET는 극한단계에서도 파단이 발생하지 않았다. PET는 휨강도 및 연성 증진 측면에서 RC 부재의 보강용으로 적합하다고 사료되나, 탄성계수가 낮으므로 많은 양을 사용하여야 하는 단점이 있으므로 이 연구에서 PET는 GF에 비해 인장 강성비 20% 수준으로 사용하였다. 한편 PET의 내구성에 대하여는 현재 연구가 진행 중에 있다.

• 한국해양공학회지
• /
• 제26권3호
• /
• pp.26-32
• /
• 2012

Recently, concrete using multicomponent blended cement has been required to increase the freeze-thaw and sulfate resistances of concrete structures exposed to a marine environment. Thus, the purpose of this study was to propose the use of concrete containing multicomponent blended cement as one of the alternatives for concrete structures exposed to a marine environment. For this purpose, batches of concrete containing ordinary portland cement (OPC), binary blended cement (OPC-G, G: ground granulated blast slag), ternary blended cement (OPC-GF, F: fly ash), and quaternary blended cement (OPC-GFM, M: mata-kaolin) were made using a water-binder ratio of 50%. Then, the durability levels, including thesulfate and freeze-thaw resistances, were estimated for concrete samples containing OPC, OPC-G, OPC-GF, and OPC-GFM. It was observed from the tests that the durability levels of the concrete samples containing OPC-G and OPC-GF were found to be much better than that of the concrete containing OPC. The optimum mixing proportions were a40% replacement ratio of ground granulated blast slag for the binary blended cement and a30% replacement ratio of ground granulated blast slag and 10% fly ash for the ternary blended cement.

• Elastomers and Composites
• /
• 제54권2호
• /
• pp.135-141
• /
• 2019

Polyphenylene sulfide (PPS) was filled with glass fiber (GF), aramid fiber (AF), and solid lubricants to improve the mechanical properties and wear resistance. The addition of GF effectively enhanced the tensile strength, flexural modulus, and impact strength of PPS, while solid lubricants such as polytetrafluoroethylene (PTFE), molybdenum disulfide ($MoS_2$), and tungsten disulfide ($WS_2$) lowered the friction coefficients of the composites to below 0.3. The ball nut and motor pulley of the electric power steering (EPS) were manufactured using the PPS composites, and feasibility was ascertained thereafter by conducting the durability test. The composites filled with GF and AF showed high mechanical strength, but slip occurred at the interface between the pulley and belt while testing above $50^{\circ}C$. When small amounts of lubricants were added, the slip was no longer detected because of the suppression of friction heat. It is realized that the low friction as well as high mechanical properties is important to ensure the reliability of plastic pulleys.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.204-209
• /
• 1999

각종섬유를 연속섬유 보강재로 사용하는 경우, 일반적으로 수지를 매트릭스로 하여 봉재 형상(FRP rod)으로 제조하고있다. 성형된 섬유는 수지가 섬유의 보호재 역할을 하기 때문에, 콘크리트내의 알칼리와 절연되어 열화가능성이 작다고 고려된다. 그러나, 일반적으로 섬유를 둘러싼 수지는 그 두께가 수 {$mu}m$이하로 특히 얇고, 운반이나 보관시에 수지가 물리적 변형 및 자외선에 의한 열화가 일어날 가능성이 높다. 또 알칼리에 의하여 에스테르의 가수분해반응에 따른 폴리머의 부식 등, 수지에 알칼리의 침입을 완전히 막는 것이 불가능하게 여겨진다.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.45-50
• /
• 2005

Stick type ignition coil(called a Cigar coil) is a kind of transformer for an automobile modulaized of distributer and electric cable. A material of cigar coil is PBT $GF30\%$ resin. This is an excellent engineering plastic with both mechanical and electrical properties. When we insert an HV terminal into the PBT $GF30\%$ resin jacket, it breaks the jacket, because the HV terminal is bigger than the jacket. It is a fatal on durability of a part. In this study, We used ANSYS FEM tool in order to stress analysis by contact. In order to automatically estimate possible maximum diameter of an HV terminal, we used an APDL. In the contact part, we considered the relation of the HV terminal's diameter with the amount of stress that occurred. This relation is able to be applied, in part, to the dimensions of the part design.

• 한국표면공학회지
• /
• 제52권2호
• /
• pp.84-89
• /
• 2019

We fabricated durable anti-reflective(AR) layer with silica globular coating on polymer by two steps. Firstly, nano-protrusions of polymer were formed by plasma etching known as R.I.E(reactive ion etching) process. Secondly, silica globular coating was deposited on polymer nano-protrusions for mechanically protective and optically enhancing AR layers by RF magnetron sputter. And then durable antireflective polymers were synthesized adjusting plasma power and time, working pressures of RIE and RF sputtering processes. Consequently, we acquired the average transmission (94.10%) in the visible spectral range 400-800 nm and the durability of AR layer was verified to sustain its transmission until 5,000 numbers by rubber test at a load of 500 gf.