• 한국자기학회지
• /
• 제26권2호
• /
• pp.45-49
• /
• 2016

분광학적 분리인자 $g_{ij}$와 영자기장 갈라지기 상수 값 $B_k^q$ 값을 유효 스핀 하밀토니안에 사용하여, $PbWO_4$ : Gd 단결정 내의 정방정계 대칭성 자리에 위치하고 있는 $Gd^{3+}$ 상자성 불순물 이온(유효전자 스핀 S = 7/2)의 바닥상태에서의 에너지 준위를 계산하였다. 외부 자기장이 영일 경우의 $Gd^{3+}$ 이온의 영자기장 갈라지기 값은 $PbWO_4$ : Gd 단결정의 방향에 관계없이 모두 같았고, 이때 ${\mid{\pm}7/2}$ > ${\leftrightarrow}{\mid{\pm}5/2}$ >, ${\mid{\pm}5/2}$ > ${\leftrightarrow}{\mid{\pm}3/2}$ >, ${\mid{\pm}3/2}$ > ${\leftrightarrow}{\mid{\pm}1/2}$ > 전이 사이에서 계산된 에너지 간격은 각각, 6.9574 GHz, 6.9219 GHz, 15.8704 GHz이다. 결정학적 축에 대하여 외부 자기장을 가하는 방향에 따라서 서로 다른 에너지 준위 값을 나타내었다. 이중 외부자기장이 결정학적 주축 a- 및 c-축에 나란할 경우에 에너지 준위를 계산하여 논의하였다.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.39-44
• /
• 2012

The fabrications condition and superconducting properties of top-seeded melt growth (TSMG) processed $GdBa_2Cu_3O_{7-y}$ (Gd123) bulk superconductors were studied. Processing parameters (a maximum temperature ($T_{max}$), a temperature for crystal growth ($T_G$) and a cooling rate ($R_G$) through a peritectic temperature ($T_P$) for the fabrication of single grain Gd123 superconductors were optimized. The magnetic levitation forces, trapped magnetic fields, superconducting transition temperature ($T_c$) and critical current density ($J_c$) of the Gd123 bulks superconductors were estimated. Single grain Gd123 bulk superconductors were successfully fabricated at the optimized processing condition. The $T_c$ of a TSMG processed Gd123 sample was 92.5 K and the $J_c$ at 77 K and 0 T was approximately $50kA/cm^2$. The trapped magnetic field contour and magnetic levitation forces were dependent on the top surface morphology of TSMG processed Gd123 samples. The single grain Gd123 samples, field-cooled at 77 K using a Nd-B-Fe permanent magnet with 5.27 kG and 30 mm dia., showed the trapped magnetic field contour of a single grain with a maximum of 4 kG at the sample center. The maximum magnetic levitation forces of the single grain Gd123 sample, field-cooled or zero field-cooled, were 40 N and 107 N, respectively.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.219-224
• /
• 1996

노심설계에서 현재 사용되는 일체형 가연성 흡수봉인 Gd, ZrB$_2$ 그리고 Er의 한국표준형 원전 노심 설계에의 타당성을 노심 F$\Delta$H 제어, 저누출 장전모형 설계, 농축도/주기길이 그리고 주기말의 잔존 페널티 등의 측면에서 분석하였다. 초기노심의 경우는 영광 3호기 1주기 장전모형에 동일 연료집합체를 사용한 Gd/ZrB$_2$/Er의 경우와 ZrB$_2$/Er 최적장전모형에 동일 연료집합체를 사용한 경우에 대하여 분석하였다. 평형노심은 Gd/ZrB$_2$/Er 모두 동일한 장전모형을 사용한 18개월 주기길이의 노심에 대하여 동일한 농축도에서의 주기길이차이와 동등 주기길이를 내는데 필요한 농축도 요구량에 대하여 분석하였다. 초기노심 평형노심 모두 F$\Delta$H 제어에는 ZrB$_2$/Er가 Gd보다 유리하였으며, 저누출 장전모형의 설계에도 ZrB$_2$와 Er가 Gd보다 유리하였다. 평형노심에서 동일한 주기길이를 내는데 요구되는 농축도는 ZrB$_2$에 비하여 Er는 0.182 w/o Gd는 0.063 w/o 높게 나타났으며 동일 농축도를 사용할 경우 주기길이는 ZrB$_2$에 비하여 Gd는 165 MWD/MTU 그리고 Er은 575 MWD/MTU가 짧게 나타났다. 따라서, F$\Delta$H 제어와 저누출 장전모형은 설계에는 ZrB$_2$와 Er가 Gd보다 유리하였으나 Er의 경우 주기말에서의 잔존 페널티가 매우 크다는 단점이 있다.

• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.916-920
• /
• 2003

무게 비로 6%의 Gd가 치환된 이산화 우라늄, ( $U_{0.913}$G $d_{0.087}$) $O_2$를 475$^{\circ}C$ 공기 분위기에서 산화시키고 130$0^{\circ}C$ 공기 분위기에서 열처리시킬 때 변화하는 결정 구조, 형상 등을 XRD, SEM 및 EPMA 등을 이용하여 관찰하였다. 입방계 구조의 ( $U_{0.913}$G $d_{0.087}$) $O_2$는 475$^{\circ}C$ 공기 분위기에서 사방정게 구조의 ( $U_{0.913}$G $d_{0.087}$)$_3$ $O_{8}$로 산화되었다. 저온 산화에 의해 생성된 사방정계 130$0^{\circ}C$의 고온에서 열처리하는 동안 사방정계 상과 압방정계 상으로 다시 분리되었다. XRD와 EPMA 관찰결과, 분리된 사방정계 상과 입방정계 상은 각각 $U_3$ $O_{8}$과 ( $U_{0.67}$G $d_{0.33}$) $O_{2+}$x/인 것을 확인하였다. 열처리 동안 일어나는 일련의 산화와 상 분리 과정은 상 반응식으로 나타낼 수 있다. 각 열처리 단계에서의 무게 변화비를 측정하고 상 반응식을 이용하면 (U,Gd) $O_2$에 고용되어 있는 초기 Gd 함량을 정확히 계산할 수 있다.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.569-574
• /
• 2012

Large single grain $Gd_{1.5}Ba_2Cu_3O_{7-y}$ (Gd1.5) bulk superconductors were fabricated by a top-seeded melt growth (TSMG) process using an $NdBa_2Cu_3O_{7-y}$ seed. The seeded Gd1.5 powder compacts with a diameter of 50 mm were subjected to the heating cycles of a TSMG process. After the TSMG process, the diameter of the single grain Gd1.5 compact was reduced to 43 mm owing to the volume contraction during the heat treatment. The superconducting transition temperature ($T_c$) of the top surface of the single grain Gd1.5 sample was as high as 93.5 K. The critical current densities ($J_cs$) at 77 K and 1T and 1.5 T were in ranges of 25,200-43,900 $A/cm^2$ and 10,000-23,000 $A/cm^2$, respectively. The maximum attractive force at 77 K of the sample field-cooled using an Nd-B-Fe permanent magnet (surface magnetic field of 0. 527 T) was 108.3 N; the maximum repulsive force of the zero field-cooled sample was 262 N. The magnetic flux density of the sample field-cooled at 77 K was 0.311T, which is approximately 85% of the applied magnetic field of 0.375 T. Microstructure investigation showed that many $Gd_2BaCuO_5$ (Gd211) particles of a few ${\mu}m$ in size, which are flux pinning sites of Gd123, were trapped within the $GdBa_2Cu_3O_{7-y}$ (Gd123) grain; unreacted $Ba_3Cu_5O_8$ liquid and Gd211 particles were present near the edge regions of the single grain Gd1.5 bulk compact.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1048-1049
• /
• 2006

Rapidly solidified ribbon-consolidation processing was applied for preparation of high strength bulk Mg-Zn-Gd alloys. Mg alloys have been used in automotive and aerospace industries. Rapid solidification (RS) process is suitable for the development of high strength Mg alloys, because the process realizes grain-refinement, increase in homogeneity, and so on. Recently, several nanocrystalline Mg-Zn-Y alloys with high specific tensile strength and large elongation have been developed by rapidly solidified powder metallurgy (RS P/M) process. Mg-Zn-Y RS P/M alloys are characterized by long period ordered (LPO) structure and sub-micron fine grains. The both additions of rare earth elements and zinc remarkably improved the mechanical properties of RS Mg alloys. Mg-Zn-Gd alloy also forms LPO structure in -Mg matrix coherently, therefore, it is expected that the RS Mg-Zn-Gd alloys have excellent mechanical properties. In this study, we have developed high strength RS Mg-Zn-Gd alloys with LPO structure and nanometer-scale precipitates by RS ribbon-consolidation processing. $Mg_{97}Zn_1Gd_2$ and $Mg_{95.5}Zn_{1.5}Gd_3$ and $Mg_{94}Zn_2Gd_4$ bulk alloys exhibited high tensile yield strength (470 MPa and 525 MPa and 566 MPa) and large elongation (5.5% and 2.8% and 2.4%).

• Journal of Evidence-Based Herbal Medicine
• /
• 제2권1호
• /
• pp.19-24
• /
• 2009

GD68 is newly developed herb complex prescription. The constituent herbs of GD68 were Massa Medicata Fermentata, Atractylodis Rhizoma Alba, Poria, Zingiberis Siccatum Rhizoma, Crataegi Fructus, Saccarum Granorum, Agastachis Herba, Taraxaci Herba, Perillae Herba, Scutellariae Radix, Astragali Radix, Ginseng Radix, Houttuyniae Herba and Halloysitum Rubrum. The aim of this study was to examine feed value of GD68 in duck. The weight gain of ducks fed with supplemental GD68 high compared to those of the control. The feed intake and mortality of ducks fed with supplemental GD68 low compared to those of the control. The moisture, crude lipid and calorie content of the ducks fed GD68 were decreased, but the crude protein content of the ducks fed GD68 was increased. And we investigated the effect of GD68 on the production of cytokines in human T-cell line, MOLT-4 cells. GD68 plus concanavalin A (Con A) increased the interferon-$\gamma$ and interleukin-2 production compared with Con A alone. These results indicate that the supplemental GD68 may improve the production, meat quality and immunity of ducks.

• Nuclear Engineering and Technology
• /
• 제49권3호
• /
• pp.576-580
• /
• 2017

A dynamic nanoindentation method was applied to study an Fe-18 at.% Gd alloy as a neutron-absorbing material prepared by vacuum arc-melting and cast in a mold. The Fe-18 at.% Gd cast alloy had a microstructure with matrix phases and an Fe-rich primary dendrite of $Fe_9Gd$. Rietveld refinement of the X-ray spectra showed that the Fe-18 at.% Gd cast alloy consisted of 35.84 at.% $Fe_3Gd$, 6.58 at.% $Fe_5Gd$, 16.22 at.% $Fe_9Gd$, 1.87 at.% $Fe_2Gd$, and 39.49 at.% ${\beta}-Fe_{17}Gd_2$. The average nanohardness of the primary dendrite phase and the matrix phases were 8.7 GPa and 9.3 GPa, respectively. The fatigue limit of the matrix phase was approximately 37% higher than that of the primary dendrite phase. The dynamic nanoindentation method is useful for identifying local phases and for analyzing local mechanical properties.

• 한국재료학회지
• /
• 제13권8호
• /
• pp.537-542
• /
• 2003

($Y_{l-x}$ $Gd_{x}$ )$O_2$$_3$: $Eu^{ 3＋}$ red phosphors were prepared with the solvothermal synthesis using the 2-methoxy-ethanol solvents and the emission intensity was investigated that applied with the 254 nm wavelength and the maximum excitation wavelength for energy source. The used solvents for the solvothermal synthesis were made of nitrate salt solutions of Y, Gd and Eu. These solutions dropped in autoclave have be reacted with the solvothermal synthesis at $200^{\circ}C$ for 5hrs and the red phosphors prepared here in were showed the pure cubic phase after annealing at $1000∼1200^{\circ}C$. The brightness of ($Y_{l-x}$ $Gd_{x}$)$_2$$O_3$: $Eu^{3＋}$ phosphors particles was increased as an increase of Gd ratio. The maximum excitation wavelengths of ($Y_{l-x}$ $Gd_{x}$ )$_2$$O_3$: $Eu^{3＋}$ / phosphors particles were increased according to increasing Gd ratio from 253 nm to 259 nm wavelength. The maximum emission intensity of $Gd_2$$O_3$: $Eu^{3＋}$ (Y/Gd = 1/0) phosphors particles under UV 259 nm was found to be higher than the commercial product of $Y_2$$O_3$: $Eu^{3＋}$ phosphors.

• 한국자기학회지
• /
• 제8권2호
• /
• pp.67-73
• /
• 1998

perovskite Gd1-xSrxFeO3-y(x=0.0, 0.5) 시료의 결정학적 및 자기적 성질을 X-ray 회절과 Mossbauer 분광법 및 VSM를 이용하여 연구하였다. 결정 구조는 모두 orthorhormcis 구조를 가지며 Gd0.5Sr0.5FeO3-y의 격자상수는 a0=5.53$\AA$, bo=5.608$\AA$, C0=7.724$\AA$이었다. Gd1-xSrxFeO3-y(x=0.0, 0.05,)의 Mossbauer 실험을 4.2K부터 690K 온도 영역에서 수행하였고 Neel 온도는 GdFeO3 는 690K로 Gd0.5Sr0.5FeO3-y는 515K로 결정 하였다. GdFeO3 시료의 이온 상태는 Fe3+임을 알 수 있었고 Brillouin 함수값S=5/2를 만족하며 팔면체 자리를 나타내고 있다. Mossbauer spectrum과 Mohrdua 분석에 의해 Gd0.5Sr0.5FeO3-y 시료는 Fe3+와 Fe4+이온이 공존하여 존재합을 알았다.