• Journal of Food Hygiene and Safety
• /
• v.28 no.3
• /
• pp.222-226
• /
• 2013

A simple and sensitive analytical method was developed using gas chromatograph with electron capture detector (GC-ECD) and gas chromatograph-mass spectrometer (GC-MS) for determination and identification of chloropicrin. Because of small molecular weight and high volatile properties of chloropicrin, analytical method was developed utilizing headspace extraction and direct injection to the GC. The developed method was validated using hulled rice sample spiked with chloropicrin at different concentration levels, 0.1 and 0.5 mg/kg. Average recoveries of chloropicrin (using each concentration three replicates) ranged 77.7~79.3% with relative standard deviations less than 10% and calibration solutions concentration in the range $0.005{\sim}0.5{\mu}g/mL$, and limit of detection (LOD) and limit of quantification (LOQ) were 0.004 and 0.01 mg/kg, respectively. The result showed that developed analytical methods was successfully applied to detect a small amount of chloropicrin in hulled rice.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.2
• /
• pp.104-116
• /
• 2018

BACKGROUND: This experiment was conducted to establish a simultaneous analysis method for 7 kinds of herbicides in 3 different classes having similar physicochemical property as diphenyl ether(bifenox and oxyfluorfen), dinitroaniline (ethalfluralin and trifluralin), and chloroacetamide (metolachlor, pretilachlor, and thenylchlor) in crops using GC-ECD/MS. METHODS AND RESULTS: All the 7 pesticide residues were extracted with acetone from representative samples of five raw products which comprised apple, green pepper, Kimchi cabbage, hulled rice and soybean. The extract was diluted with saline water and directly partitioned into n-hexane/dichloromethane(80/20, v/v) to remove polar co-extractives in the aqueous phase. For the hulled rice and soybean samples, n-hexane/acetonitrile partition was additionally employed to remove non-polar lipids. The extract was finally purified by optimized Florisil column chromatography. The analytes were separated and quantitated by GLC with ECD using a DB-1 capillary column. Accuracy and precision of the proposed method was validated by the recovery experiment on every crop samples fortified with bifenox, ethalfluralin, metolachlor, oxyfluorfen, pretilachlor, thenylchlor, and trifluralin at 3 concentration levels per crop in each triplication. CONCLUSION: Mean recoveries of the 7 pesticide residues ranged from 75.7 to 114.8% in five representative agricultural commodities. The coefficients of variation were all less than 10%, irrespective of sample types and fortification levels. Limit of quantitation (LOQ) of the analytes were 0.004 (etahlfluralin and trifluralin), 0.008 (metolachlor and pretilachlor), 0.006 (thenylchlor), 0.002 (oxyfluorfen), and 0.02 (bifenox) mg/kg as verified by the recovery experiment. A confirmatory technique using GC/MS with selected-ion monitoring was also provided to clearly identify the suspected residues. Therefore, this analytical method was reproducible and sensitive enough to determine the residues of bifenox, ethalfluralin, metolachlor, oxyfluorfen, pretilachlor, thenylchlor, and trifluralin in agricultural commodities.

• Journal of Food Hygiene and Safety
• /
• v.27 no.4
• /
• pp.332-338
• /
• 2012

A simple and sensitive analytical method was developed using gas chromatography with electron capture detector (GC-ECD) and gas chromatography-mass spectrometry (GC-MS) for determination of Picoxystrobin in agricultural products (apple, hulled rice, mushroom, pepper, soybean, and mandarin). Picoxystrobin residues were extracted with acetonitrile, partitioned with saline water, and then they were cleaned up on a florisil solid-phase extraction (SPE) cartridge to obtain an extract suitable for analysis by GC-ECD and GC-MS. The method was validated using 6 agricultural product samples spiked with Picoxystrobin at different concentration levels (0.02, 0.05 and 0.5 mg/L). Average recoveries of Picoxystrobin (using each concentration three replicates) ranged 64.0~98.3% with relative standard deviations less than 10%, calibration solutions concentration in the range 0.1~5 mg/L, and limit of detection (LOD) and limit of quantification (LOQ) were 0.005 and 0.02 mg/L, respectively. The result showed that the developed analytical method is suitable for Picoxystrobin determination in agricultural products.

• Journal of Environmental Science International
• /
• v.4 no.3
• /
• pp.97-97
• /
• 1995

PCBs have been measured using GC-ECD, GC-MS, GC-ELCD, HPLC, TLC, NMR and Immunoassay. The analysis of PCBs using GC-ECD include the peak pattern method as none derivatization and the Perchlorination method as derivatization. This study was conducted to establish the perchlorination method with Sbcls from PCBs to decachlorinated biphenyl(DCB). The aroclor 1242 of PCBs was chlorinated and then, converted into the DCB which showed a single peak in GC-ECD chromatogram. The detection limit of DCB was 2pg. The quantification detection concentration of PCBs extracted with soxhlet was 0.5ng/g in the soil. PCBs were not detected in the suburban soil, but 174ng/g in the soil of industrial complex. Mean PCBs concentration of Shinchun stream at Kumho river and Jinchun stream at Nakdong river was calculated average 낙ngjg in 각e sediment. PCBs concentration in the sediment of Kumho river near 2-7km from conjunction with Nakdong river was average 154ng/g. PCBs concentration in the sediment of Nakdong river near conjunction with Kumho river was average 159ng/g.

• Journal of Environmental Science International
• /
• v.4 no.3
• /
• pp.249-258
• /
• 1995

PCBs have been measured using GC-ECD, GC-MS, GC-ELCD, HPLC, TLC, NMR and Immunoassay. The analysis of PCBs using GC-ECD include the peak pattern method as none derivatization and the Perchlorination method as derivatization. This study was conducted to establish the perchlorination method with Sbcls from PCBs to decachlorinated biphenyl(DCB). The aroclor 1242 of PCBs was chlorinated and then, converted into the DCB which showed a single peak in GC-ECD chromatogram. The detection limit of DCB was 2pg. The quantification detection concentration of PCBs extracted with soxhlet was 0.5ng/g in the soil. PCBs were not detected in the suburban soil, but 174ng/g in the soil of industrial complex. Mean PCBs concentration of Shinchun stream at Kumho river and Jinchun stream at Nakdong river was calculated average 낙ngjg in 각e sediment. PCBs concentration in the sediment of Kumho river near 2-7km from conjunction with Nakdong river was average 154ng/g. PCBs concentration in the sediment of Nakdong river near conjunction with Kumho river was average 159ng/g.

• Proceedings of the PSK Conference
• /
• 2001.10a
• /
• pp.288.1-288.1
• /
• 2001

• Korean Journal of Food Science and Technology
• /
• v.46 no.1
• /
• pp.7-12
• /
• 2014

A sensitive and simple analytical method to identify flutianil residues in agricultural commodities was developed and validated using gas chromatography-electron capture detection (GC-ECD) and mass spectrometry (GC-MS). The flutianil residues were extracted with acetonitrile, partitioned with dichloromethane, and then purified using a silica solid-phase extraction (SPE) cartridge. The method was validated using pepper, sweet pepper, mandarin, hulled rice, soybean, and potato spiked with 0.02 or 0.2 mg/kg flutianil. The average recovery of flutianil was 76.5-108.0% with a relative standard deviation of less than 10%. The limit of detection and limit of quantification were 0.004 and 0.02 mg/kg, respectively. The result of recoveries and relative standard deviation were in line with Codex Alimentarius Commission Guidelines (CAC/GL 40). These results show that the method developed in this study is appropriate for flutianil identification and can be used to maintain the safety of agricultural products containing flutianil residues.

• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.237-248
• /
• 1995

The simultaneous analysis of 16 organic pesticides, which are listed as a part of 129 priority pollutants by EPA(Environmental Protection Agency), was performed by GC-ECD(electron capture detector) and GC/MS-SIM(selected ion monitoring). Two extraction procedures from SW-846, sonication extraction and Soxhlet extraction, were somewhat modified and compared as an extraction and concentration method for the analysis of priority pollutants in soil. Accuracy and precision of the methods were reported from the calculation of mean recovery, mean relative standard deviation, and method detection limit.

• Korean Journal of Food Science and Technology
• /
• v.36 no.6
• /
• pp.863-871
• /
• 2004

Analyses of residual pesticides in raw materials used for dietary supplements were performed using multi-ingredients simultaneous analysis method. Pesticides such as BHC, chlorpyrifos, and quintozene were detected in 12 domestic and 7 imported samples, suggesting need for monitoring pesticides in domestic and imported raw materials and establishing residual limit of each pesticide.

• Korean Journal of Food Science and Technology
• /
• v.45 no.3
• /
• pp.382-384
• /
• 2013

We evaluated the presence of uniconazole residual pesticide in agricultural products by using multiclass pesticide multiresidue methods. Samples were collected from January to August, 2012. The pesticide was detected in 14 samples among the 3,632 samples tested. Amount of the uniconazole pesticide ranged from 0.098 to 2.2 mg/kg in the 14 samples. This method was described for the simultaneous determination of uniconazole by using gas chromatography with an electron capture detector (GC-ECD) and mass spectrometry (MS). For evaluating the GC-ECD method, uniconazole was spiked into gyeojachae at a level of 0.05, 0.5 mg/kg. The recoveries of uniconazole with the GC-ECD method ranged from 98.9-109.4%. The results indicate that our method of simultaneous analysis is applicable to uniconazole analysis.