• Preventive Nutrition and Food Science
• /
• v.11 no.3
• /
• pp.232-236
• /
• 2006

The essential oil of Swertia chirata Buch.-Ham. was extracted by solvent extraction (n-pentane:diethylether, 1:1) method using simultaneous distillation-extraction (SDE) apparatus and analyzed by gas chromatography-mass spectrometry (GC/MS). The yield of essential oil obtained from S. chirata was 236.47 mg/kg. Seventy seven compounds of the essential oil belonging to chemical classes of acid (4), alcohol (21), aldehyde (15), ester (3), furan (3), hydrocarbon (7), ketone (17) and miscellaneous (7) were tentatively identified. The major volatile compounds ranged in content order were as follows: undecanoic acid (28.63%), 2-buten-2-one (20.42%), camphor (18.40%), 2-heptadecanone (14.72%), and cedrol (13.07%).

• Journal of Korean Society on Water Environment
• /
• v.18 no.4
• /
• pp.421-433
• /
• 2002

This study was conducted to develope a simple, rapid and solvent-free solid-phase microextraction(SPME) procedure for extracting three organochlorine, one triazine and nine organophosphorus pesticides from water. The optimal conditions of SPME for analyses of organochlorine pesticides were obtained at $250^{\circ}C$ of desorption temperature, 45 minutes of equilibrium time, pH 6 and NaCl 0% addition using $100{\mu}m$ polydimethylsiloxane fiber and those of triazine and organophosphorus pesticides were obtained at $270^{\circ}C$ of desorption temperature, 60 minutes of equilibrium time, pH 6 and NaCl 0% addition using $100{\mu}m$ polydimethylsiloxane fiber. This method showed good lineality for organochlorine pesticides between 0.0001 and $10{\mu}g/L$ with regression coefficients ranging 0.9986~0.9992 and for triazine and organophosphorus pesticides between 0.01 and $10{\mu}g/L$ with regression coefficients ranging 0.9867~0.9998.

• Journal of the Korean Society of Safety
• /
• v.21 no.6 s.78
• /
• pp.38-45
• /
• 2006

Polymeric floorings mainly consisted of PVC are easily decomposed by many kinds of hot environmental factors, then generate hazardous asphyxiate gases and/or toxic gases etc. Therefore the mechanism of decomposition and quantitative toxic indices of products are very important for preventing safety and health disasters, especially in case of confined area. So we have investigated decomposition kinetics, numbers of process involved, toxicity indices of product and so on, using DSC, TGA, FT-IR and Pyrolyzer-GC/MS. The thermal decomposition process of polymeric floorings can be mainly divided by dehydrochlorinated reaction and polyene decomposition step, and activation energies of those are approximately $53.93{\sim}62.42kcal/mol$. Especially lethal concentration($LC_{50}$), fractional effective dose (FED) are calculated by measuring the amount of decomposition product. The values on $LC_{50}$ of sample G are ranged $2,003{\sim}2,019(mg/m^{3})$ in case of sample K and H are $1,877,\;1,998(g/m^{3})$ respectively. Even if the results are estimated by calculation method without animal test and/or clinical demonstration, these values could be very useful data for occupational health, hygiene and safety control.

• Applied Biological Chemistry
• /
• v.40 no.5
• /
• pp.451-454
• /
• 1997

An attempt was made in this study to analyze volatile flavor components of fresh and odorless garlic (Allium sativum L.), Essential oils in fresh garlic and odorless garlic were isolated by a simultaneous steam distillation and extraction(SDE) method using n-pentane/diethy ether as solvent. A total of 21 and 22 components were identified by GC/MS from the essential oils of fresh garlic and odorless garlic, respectively. Diallyl trisulfide, diallyl disulfide and methyl allyl disulfide were found to be major volatile flavor components in fresh garlic and odorless garlic. By the preparation of ordorless garlic, 77.5% of diallyl trisulfide, 15.0% of diallyl disulfde, 72% of methyl allyl disulfide, and 78.4% of allyl thiol components in fresh garlic were lost. Eleven compounds including 2-vinyl-4H-1,3-dithiin, eugenol and 2-methoxy-4-vinyl-phenol were identified in odorless garlic, but not m fresh garlic.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.1
• /
• pp.80-89
• /
• 2019

Pine barks are important biomass resources because they are utilised in the production of pine wood and rosins. However, no chemical study has been conducted on the hydrophilic status of pine barks in Indonesia. This aim of this study is to explore the hydrophilic extracts of the barks from six Pinus species (P. elliotii, P. caribeae, P. oocarpa, P. merkusii P. montezumae, and P. insularis). The hydrophilics of pine barks were analysed using gas chromatography-mass spectrometry. The presence of polyphenol contents in the ethanol extracts obtained from the barks of six Pinus species was determined using the tannin-formaldehyde method, Folin-Cioucalteu assay, and vanillin-HCl assay. The ethanol and hot water soluble extractives derived from inner barks were higher in quantity when compared to those derived from the outer bark samples. The polyphenol measurement showed that the highest value of total phenol content was derived from the outer bark of P. montezumae whereas those of the total phenol and tannin- formaldehyde contents were derived from the inner and outer barks of P. oocarpa. GC-MS analysis revealed that nitrogenous compounds are dominant constituents in the inner and outer barks of the six species, followed by sugars and monophenolics, respectively.

• Environmental Engineering Research
• /
• v.12 no.3
• /
• pp.93-100
• /
• 2007

I improved an analytical method for determining trace amounts of eleven phenolic endocrine-disrupting chemicals (11 phenolic EOCs) in human urine. The 11 phenolic EOCs were subjected to hydrolysis and then to solid phase extraction with a XAD-4 column. Alkylphenols, chlorophenols, and bisphenol A in XAD-4 column were eluted with acetonitrile, and the eluate was concentrated under a nitrogen stream, and then tert-butyldimethylsilylation. Separation and determination were done by gas chromatography, using mass spectrometry operating in the selective ion monitoring mode for quantitation. For tert-butyldimethylsily (TBDMS) derivatization the recoveries were $91.2{\sim}125.9%$, the limits of quantitation (LOQ) for the 11 phenolic EOCs in the nanogram-per-milliliter range ($0.025{\sim}1.000\;ng/mL$) were thus achieved by using 1 mL of urine, and the SIM responses were linear with the correlation coefficient varying by $0.9300{\sim}0.9943$. Based on the results for urine samples from unexposed individuals, 4-tert-octylphenol and pentachlorophenol were detected in hydrolysed urine sample. Other alkylphenols, chlorophenols and bisphenol A were not detected.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3535-3541
• /
• 2014

Bisphenol A is considered as pollutant, because it is toxic and hazardous to living organisms even at very low concentrations. Biological oxidation used for removing this organic from waste water is not suitable and consequently application of catalytic wet oxidation has been considered as one of the best options for treating bisphenol A. We have developed Fe/SBA-15, Ni/SBA-15 and Fe-Ni/SBA-15 as heterogeneous catalysts using the advanced impregnation method for oxidation of bisphenol A in water. The catalysts were characterized with physico-chemical characterization methods such as, powder X-ray diffraction (PXRD), FT-IR measurements, N2 adsorption-desorption isotherm, thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis. This work illustrates activity of the catalysts for heterogeneous catalytic degradation reaction revealed with excellent conversion and recyclability. The degradation products identified were not persistent pollutants. GC-MS analysis identified the products: 2,4-hexadienedioic acid, 2,4-pentadienic acid and isopropanol or acetic acid. The leachability study indicated that the catalysts release very little metals to water. Therefore, the possibility of water contamination through metal leaching was almost negligible.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.66-66
• /
• 2018

Light fermentation has been conducted under different light conditions such as normal dark light, white light, and light emitting diodes (LEDs) various color (blue, green, red, white on blueberry powder with fermenting bacteria Bacillus subtilis (B2). The bacteria B2 was isolated and identified by 16S rRNA sequencing method. RYRP biologically converted to secondary metabolites through light fermentation in the presence of Bacillus subtilis, the bacteria actively involved in bioconversion process. LEDs fermentation to enhance the production of phenolic content while comparing to normal dark and white light. Among the different color LEDs, blue LEDs mediated fermentation showed higher amount of total phenolic and flavonoid content. Then blue LEDs mediated fermented compound were characterized by FTIR and GC-MS, subsequently the compound was analyzed antioxidant activity tests and the antioxidant activity exhibited higher. This is the first study to demonstrate that B. subtilis-LEDs mediated fermentation is useful for facilitating phenolic compound production and enhancing antioxidant activity, which may have greater application fermentation fields.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.49-52
• /
• 2009

Single-drop microextraction (SDME) is an extraction methodology where the drop plays an essential role as extracts. It was evaluated for the GC-MS determination of nerve agents, one class of the chemical warfare agents (CWAs). Since these nerve agents are highly toxic, it is important to detect the nerve agents in the environmental samples. Several affecting factors including extraction solvents, stirring rate, extraction time, and amounts of salt were optimized. The limit of detections (LODs) were 0.1 - 10 ng/mL and the relative standard deviations (RSDs%, n=5) were in the range of 6.3% to 9.0% for four nerve agents. Without pretreatment of the environmental samples, 5-103 fold enrichments and 48-100% recovery were accomplished. These results demonstrated the feasibility of this method for on-site and off-site analysis of water sample collected from suspicious CWAs site.

• Environmental Engineering Research
• /
• v.19 no.3
• /
• pp.205-214
• /
• 2014

Petroleum a vital commodity affecting every aspect of 21st century. Toxicity and adverse effects of sulphur as catalyst in petroleum products is of great concern required development of techniques for desulphurization in compliance with the International standards. Installation of desulphurizing units costs over $200 million per unit placing economic burden on developing countries like Pakistan. Present study analysis of commercial fuels (station petrol and jet fuel JP8) on gas chromatography-mass spectrometry (GC-MS) identified sulphur concentration of 19.94 mg/L and 21.75 mg/L, respectively. This scenario urged the researcher to attempt synthesis of material that is likely to offer good adsorption capacity for sulphur. Following protocol of sol-gel method, transition metals (Ni, Cu, Zn) solution is gelated with tetraethoxysilane (TEOS; silica precursor) using glycerol. Fourier transform infrared spectroscopy (FTIR) spectra revealed bonding of Zn-O, Cu-O, and Ni-O by stretching vibrations at $468cm^{-1}$, $617cm^{-1}$, and $468cm^{-1}$, respectively. Thiophene and Benzothiophene mixed in n-heptane and benzene (4:1) for preparation of Model Fuels I and II, respectively. Each of silica based metal was applied as adsorbent in batch mode to assess the removal efficiency. Results demonstrated optimal desulphurization of more than 90% following efficacy order as Si-Ni > Si-Zn > Si-Cu based adsorbents. Proposed multilayered (Freundlich) adsorption mechanism follows ${\pi}$-complexation with pseudo secnd order kinetics.