• The korean journal of orthodontics
• /
• v.50 no.6
• /
• pp.401-406
• /
• 2020

Objective: To investigate and compare the slot sizes and parallelism of metal injection molding (MIM) and computerized numerical control (CNC) brackets. Methods: The following four MIM bracket series with 0.022-inch (in) slots were selected for investigation: Di MIM mini Twin (Ortho Organizers), Mini Diamond Roth (Ormco), Gemini MBT (3M Unitek), and Formula R Roth (Tomy). The following four CNC bracket series with 0.022-in slots were selected for investigation: Econoline MBT (Adenta), Legend mini MBT (GC Orthodontics), Crown mini MBT (Adenta), and Evolve MBT (DB Orthodontics). The slot dimensions were measured using an optical microscope (XTCam-D310M; Mitutoyo) with a resolution of 1 ㎛. The results were statistically analyzed using one-way analysis of variance and the Tukey post-hoc test with a significance level of 0.05. Results: The results indicated that all the investigated slot sizes were oversized with respect to the manufacturers' specifications (0.022 in). Among the eight bracket series, the Di MIM bracket (MIM) was the most oversized by 10.4%, whereas the Evolve bracket (CNC) was the least oversized by 2.6%. The slots in seven of the bracket series had divergent walls instead of parallel ones. The Evolve bracket alone had parallel slot walls. Conclusions: Regardless of the manufacturing method, all the slot sizes of the brackets investigated in this study were significantly oversized; most of the slot walls were nonparallel, except for those of the Evolve bracket. This study could not establish that the CNC method was more accurate than the MIM method in manufacturing bracket slots.

• Journal of Environmental Health Sciences
• /
• v.39 no.3
• /
• pp.223-229
• /
• 2013

Objectives: In an effort to examine the distribution of THMs (Trihalomethane) generated from chlorine disinfection by the drinking water treatment plants located on the east coast region of Gangwon-do, this study surveyed the distribution and concentrations of each component of THMs twice per month for 5 years from 2008 to 2012. Fluctuation pattern in the seasonal generation amount was identified. In addition, the correlation between the concentration of organic substances in water and THMs was assessed, along with stability of purified water quality supplied by the water treatment plants on the east coast by analyzing the composition ratio of each component that constitutes THMs and the detection frequency. Method: The research was done on purified water supplied by 29 water treatment plants in 7 cities and counties (Goseong-gun, Sokcho-si, Yangyang-gun, Gangneung-si, Donghae-si, Samcheok-si, Taebaek-si) located in Gangwon-do on the east coast. Water samples were collected twice a month from 2008 to 2012 and were investigate for chloroform, bromodichloromethane (BDCM), dibromochloromethane (DBCM), and bromoform, based on analysis through Purge-Trap (Tekmar 3000) devices using FID-attached GC (HP 6890, Hewlett Packard). Result: THMs concentration detected at Gangneung-si was 0.0086mg/L, Goseong-gun 0.0019mg/L, Donghae-si 0.0099 mg/L, Samcheok-si 0.0016 mg/L, Sokcho-si 0.0057 mg/L, Yangyang-gun 0.0027 mg/L and Taebaek-si 0.0038 mg/L. As the THMs composition rate, chloroform constitutes 51.4% followed bybromodichloromethane 22.3%, bromoform 15.2% and dibromochloromethane 11.1% respectively. Conclusion: Throughout the entire THMs survey areas and period, the maximum concentration was 0.072mg/L, which did not exceed the water quality standards (0.1 mg/L), and the overall average concentration was very low at 0.0044 mg/L.

• Journal of Environmental Health Sciences
• /
• v.46 no.5
• /
• pp.548-554
• /
• 2020

Objectives: This study is to examine the polyvinyl chloride (PVC) materials in elementary school classrooms and libraries in Seoul, and to investigate phthalate contamination in indoor dust. Methods: PVC material was identified for building materials and furniture using portable x-ray fluorescence (XRF). Phthalates in dust samples (n=19) were extracted by ultrasonic extraction using cyclohexane and analyzed by GC-MS. Results: Diethyl phthalate (DEP), di-n-butyl phthalate (DBP), and Bis (2-ethylhexyl) phthalate (DEHP) were found in all collected dust samples (n=19), and diisonyl phthalate (DINP) was detected in all except for one sample (n=18). The concentration of DEHP (median: 2190 mg/kg) and DINP (2960 mg/kg) were higher than other compounds, suggesting that there are many products in the school that used these compounds. When comparing the phthalate concentration in the classroom (n=11) and library dust (n=8), the total concentration in the classroom (median: 10000 mg/kg) was higher than that in the library (8030 mg/kg). DEHP was the dominant compound in the library. The library is relatively more equipped with PVC furniture (n=83) and most floors are also identified as PVC material, suggesting that floors and furniture made of PVC materials are main sources of DEHP contamination. Conclusions: This study is a pilot survey for investigating phthalate contamination in elementary schools. As a result of the survey, phthalate contamination in elementary school was confirmed. However, further study requires risk assessment of children through analysis of phthalate metabolites in children based on sufficient number of samples and information about the site.

• The Korean Journal of Community Living Science
• /
• v.19 no.1
• /
• pp.55-61
• /
• 2008

This study was conducted to compare the nutrient and chemical contents of traditional Chungtaejeon tea with that of green tea which was harvested in Jangheung, Jeonnam district. Vitamin C, amino acids and total nitrogen contents of Chungtaejeon tea were lower than that of green tea by 0.30, 2.30 and 4.20g/100g, respectively. The tannin, caffeine, reducing sugar and chlorophyll contents in Chungtaejeon tea were the same as those in green tea. Comparing catechin contents, catechin (C), epicatechin (EC), and epigallocatechin (EGC) in Chungtaejeon tea were lower than those of green tea. However, gallocatechin (GC), epicatechin gallate (ECG), epigallocatechin gallate (EGCG) and catechin gallate (CG) showed no significant difference between Chungtaejeon tea and green tea. The flavonoid contents of Chungtaejeon tea and green tea showed higher quercetin and kaempferol contents in green tea, and higher myricetin content in Chungtaejeon tea. The measured amino acid contents for threonine and aspartic acid were lower, and for glutamic acid were higher in Chungtaejeon tea compared with those in green tea. However, free amino acid content in Chungtaejeon tea and green tea showed no significant difference. Potassium and magnesium contents in Chungtaejeon tea were lower compared to green tea but no significant difference was found for iron, manganese or calcium contents when comparing the two teas.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.4
• /
• pp.239-244
• /
• 2014

BACKGROUND: Heavy metals contamination of soils in the vicinity of abandoned mines in South Korea has been investigated. However, PAHs contamination rarely has been studied. Both heavy metals and PAHs concentrations have been measured in this study. METHODS AND RESULTS: The samples of soil and sediment were collected from the vicinities of three abandoned coal mines and two abandoned metal mines for analysis of heavy metals contaminants and PAHs concentration from April to September 2012. After preparation of these samples following the Korean standard test method for soils, the concentrations of heavy metals contaminants and PAHs were measured using ICP-OES and GC-MS, respectively. It was observed that the concentration of Arsenic was above the concern level based on 'area 1' suggested by Korean soil conservation law, resulting that Arsenic is the main contaminant in these areas. Also Cd, Cu, Pb and Zn were observed as a partial contaminants. The concentrations of other investigated components including benzo(a)pyrene were less than the concern level. CONCLUSION: The correlation observed between Arsenic (as main contaminant) and PAHs concentrations suggested that the contaminant source and pathway are different for each other. The effect of mine activity on PAHs concentration was rarely observed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.5
• /
• pp.94-99
• /
• 2004

This study was carried out to find out what is the optimum conditions for RAPD of Zelkova serata. We changes the factors what affect to PCR band patterns, as a result, we established the optimum conditions as follows; template DNA 100mg, Primer 0.25uM, dNTP 100mM, Taq polymerase 1.0u, and total reaction volume was filled up to 10uL with distilled water. As the amount of primers went higher, PCR reaction rates were lowered. This reason was cause by exhaustion of primers during initial reaction. The amount of dNTP didn't showed noticable differtations between the range, but the optimum amount was 100mM for efficiency. Taq polymerase 1.0 unit was the best in the range. As the concentration of polymerase were increased, many non-specific bands were appeared, In primer selection, most Openron Random Primers are amplified in this experiment. The primers GC contents were 60, and set A, B, C, D, E, X were tested. Thermal cycler(ASTEC PC808, Japan) condition was, $95^{\circ}C$, 5min, initial denaturation, $94^{\circ}C$, 20sec, denaturation, $37^{\circ}C$, 40sec, annealing, $72^{\circ}C$, 1min, extention, 45cycle repeated and final extention $72^{\circ}C$10min.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.133-136
• /
• 2008

In order to decrease carbon dioxide, one of the green house gas, poly(styrene carbonate) has been synthesized from carbon dioxide and styrene oxide with zinc glutarate as a catalyst. The polymer has been identified as an alternating copolymer by spectroscopic analysis, FT-IR, $^1H$-NMR, and $^{13}C$-NMR. The number average molecular weight ($M_n$) of the polymer is $5.0{\times}10^4g/mol$ and the glass transition temperature ($T_g$) is $88^{\circ}C$ and its melting point ($T_m$) is $240^{\circ}C$. The cyclic carbonate, styrene carbonate, has been obtained by thermal degradation of the polymer via the unzipping mechanism.

• Biomedical Science Letters
• /
• v.14 no.1
• /
• pp.47-53
• /
• 2008

Hox genes are known to be transcription factors controlling vertebrate pattern formation along the anteroposterior body axis by regulating many target gene expressions during vertebrate embryogenesis. In order to isolate in vivo Hox responsive target genes, ChIP-cloning technique has been applied using Hoxc8 antibody. Here murine embryo of day 11.5 post coitum (E11.5) highly expressing Hoxc8 gene was used after removing head and tail portions where Hoxc8 is rarely expressing. After fixation with formaldehyde, the chromatin DNAs harboring bound proteins were isolated. After sonication, about 0.5- to 1 Kb chromatin DNAs were immunoprecipitated with anti Hoxc8 antibody. After removing the bound proteins with proteinase K, DNAs were isolated, cloned into the pBluescsript II SK vector, and then sequenced. Total 33 random clones sequenced were anlalyzed to be located at 12 different genomic regions. Among these, 8 turned out to be introns and 4 were intergenic regions localized in random chromosomes. The base composition of total cloned genomic sequences (6608 bp) were AT-rich, i.e., 40% GC. When the Hoxc8 core binding sites, such as TAAT, ATTA, TTAT, and ATAA were analyzed total number of 55, 45, 54, and 55 were found, respectively, which are than twice as many as expected number of 26. Although this in silico analysis does not mean that the ChIP-cloned sequence is real Hoxc8 regulatory element in vivo, these results strongly imply that the DNA fragments cloned through chromatin immunoprecipitation could be very much likely the putative Hoxc8 downstream target genes.

• Korean Journal of Pharmacognosy
• /
• v.35 no.4 s.139
• /
• pp.288-292
• /
• 2004

To evaluate the quality of the crude drugs using three kinds of Cinnamomum Cortex (CC), Vietnamese CC (VCC, the stem bark of Cinnamomum obtusifolium), periderm-peeled Chinese CC (PPCC, periderm-peeled stem bark of C. cassia), Chinese CC (CCC, stem bark of C. cassia) and a Cinnamomi Ramulus (CR, the twig of C. cassia), the four essential oils were prepared by steam distillation method. Cinnamaldehdye (CAN) and an unknown substance tentatively named hydroxy-cinnamaldehdye(HCNA) were detected in the four essential oils by gas chromatography-mass spectrometry, the contents of which are significantly different one another. Vietnamese CC had the highest content of HCNA whereas CR had the highest CAN content and the lowest HCNA. Vietnamese CC exhibited the greatest cytotoxic activity against the cancer cell lines, A549, HepG-2, HL-60, P-388, U-937, and KB and CR the lowest cytotoxicity. Contents of CAN and HCNA in CCC and PPCC are positioned between VCC and CR. These results suggest that measurement of HCNA and cytotoxicity may determine the quality of CC and CR.

• Korean Journal of Veterinary Research
• /
• v.48 no.1
• /
• pp.39-48
• /
• 2008

Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) are ubiquitous and can contaminate the food chain. A study monitoring PCDD/Fs in imported meat was conducted at the National Veterinary Research and Quarantine Service (NVRQS, Republic of Korea) in order to maintain food safety from the bioaccumulative PCDD/Fs. Seventeen PCDD/Fs with toxic equivalency factors (TEFs) established by World Health Organization (WHO, 1998) were analyzed in imported beef, pork, and chicken by high resolution gas chromatography/mass spectrometry (HR-GC/MS). Results of the monitoring for the last 5 years are presented. The levels of PCDD/Fs were similar to other studies except two unusually high concentrations in pork and beef. Excessive levels greater than the Korean provisional maximum residue limit of PCDD/Fs were found in a sample of pork imported from Chile and a sample of beef imported from U.S, and those products were rejected and returned. There was no obvious trend or differences with respect to time or origin of meat in this study.