• Food Science of Animal Resources
• /
• v.31 no.6
• /
• pp.928-934
• /
• 2011

The objective of this study was to characterize the lactate metabolism and lipolysis in Emmental cheese made of Korean raw milk throughout the ripening periods; 14 d at $10^{\circ}C$, 42 d at $23^{\circ}C$, and 30 d at $4^{\circ}C$. Emmental cheese was made using a commercial starter culture with propionic acid bacteria (PAB) and without PAB as a control on the pilot plant scale. Changes in the contents of five organic acids (citric, lactic, formic, acetic, and propionic acid) and individual free fatty acids (FFAs) were measured using HPLC/PDA and GC/FID. As a result of propionic fermentation by PAB, the concentration of acetic acid and propionic acid increased up to 1.5 and 6.1 g/kg, respectively and the most dramatic increased occurred when incubated in the hot room ($23^{\circ}C$). Lactic, citric, and formic acid contents were 2.6, 2.5 and 0.8 g/kg at the end of ripening, respectively. As a result of lipolysis, the amount of total FFAs was 6,628.2 mg/kg. Compared to the control, levels of individual FFAs from butyric (C6:0) to linoleic (C18:2) acids increased significantly (p<0.05) during the ripening period. Especially, 65.1% of total FFAs was released in the $23^{\circ}C$ room and the most abundant FFAs were palmitic (C16:0), stearic (C18:0) and oleic acid (C18:1). These results demonstrated that the lipolysis of Emmental cheese was strongly affected by bacterial lipase from PAB.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.795-800
• /
• 2003

Juniper seed oil extracted by steam distillation has been a useful material as a medicine, insect repellant, and flavorant for alcoholic beverages. As the result of juniper seed oil analysis, the acid value, saponification value, unsaponification value phosphorus contents, and refractive index were 91.04, 85.15, 15.52, 11.04 ppm, 1.47, respectively The content of neutral lipids, glycolipids and phospholipids were 85.4%, 12.2% and 2.4%, respectively. From the fatty acids analysis, the major fatty acids from the juniperseed harvested in August were lauric acid (31.9% ), palmitic acid (28.0% ), stearic acid (9.9%), and oleic acid (8.5%) . However, maturated seed oil harvested in October mainly consists of linoleic acid (47.6%), linolenic acid (17.6%), oleic acid (16.1%), and palmitic acid (11.9%). Upon these analyses, fatty acids composition of juniper seed oil depends on the seed maturation. According to volatile compounds analyses of essential oil extracted using steam distillation method and SPME, the major compounds were $\beta$-myrcene, $\alpha$-pinene, $\beta$-farnescene, $\beta$-cubebene, limonene, trans-caryo-phyllene, $\alpha$-terpinolene, camphene, sabinene, and $\beta$-pinene.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.811-817
• /
• 2002

Korean traditional soy sauce was desalted using electrodialyzer, and their physicochemical properties were analyzed. The salt content of soy sauce significantly decreased from initial 18.9 (w/v) to 0.47% (w/v) and the volume also decreased to 330 mL when 1,000 mL of soy sauce was desalted for 450 min at a current of 2 A. During the desalting process, the numbers of viable cells of total bacteria, yeasts, and molds increased due to the concentration effect of the electrodialysis. Turbidity increased from 3.1 to 8.5, and total nitrogen, total sugar, and reducing sugar contents also increased. The pH, and amino nitrogen and volatile base nitrogen contents slightly decreased, with ammonia content significantly decreasing from 19.4 to $1.3\;{\mu}mol/mL$. Free amino acids content increased twofold after electrodialysis. Gas chromatograms of soy sauce showed that profiles of the flavoring compounds did not change when electrodialyzed for 360 min, but most were removed after 540 min.

• Korean Journal of Food Science and Technology
• /
• v.36 no.2
• /
• pp.196-201
• /
• 2004

Volatile components in flower and seed of safflower were identified. Volatile flavor compounds of safflower (Carthamus tinctorius L.) was extracted by simultaneous steam distillation and extraction method using Likens and Nickerson's extraction apparatus. Concentrated extract was analyzed and identified by gas chromatography and GC-mass spectrometry. Main volatile components in flower were terpene compounds, including p-cymene, limonene, ${\alpha}-phellandrene$, ${\gamma}-terpinene$, camphor, 4-terpineol, selinene, ${\beta}-caryophyllene$, torreyol, ${\beta}-eudesmol$, and 10 acids including 3-methylbutanoic acid, 2-methylbutanoic acid, and acids of $C_{2},\;C_{5}-C_{11}$. Main volatile components in seed and safflower were 20 aldehydes including hexanal (7.17%), (E)-2-heptenal (1.10%), (E,Z)-2,4-decadienal and (E,E)-2,4-decadienal.

• Journal of Life Science
• /
• v.21 no.12
• /
• pp.1740-1745
• /
• 2011

Volatile flavor compounds of 3 commercial products of black onion extract (produced in Changnyeong, Muan and Jeungpyeong) purchased in the online/offline markets were analyzed. A total of 51 compounds were detected in samples by solid phase microextraction (SPME)/GC/MSD, consisting mainly of carbonyl compounds (15), sulfur-containing compounds (8), aromatic compounds (6), furans (6), nitrogen-containing compounds (3), alcohols (2), acids (2) and miscellaneous compounds (10). Among carbonyls, 4 compounds including 2-methylbutanal, 3-methylbutanal, nonanal and benzaldehyde were detected in all samples, while two sulfur containing compounds, dimethyl disulfide and dimethyl trisulfide, were detected in high amounts and considered to be key flavors in black onion extracts. Particularly, thiophenes and 3 sulfur containing compounds (methylpropyl disulfide, methyl-(Z)-propenyl disulfide and methyl-(E)-propenyl disulfide) were detected only in two products. With acetic acid, furfural and pyrazines that formed through Maillard reaction during black onion aging were detected in high amounts in all samples. This also contributed to characteristic flavors such as roasted, sweet, and sour, in the flavor of black onion extracts.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2006.06a
• /
• pp.46-66
• /
• 2006

새로운 지능기반사회(ubiquitous society) 패러다임이란 전제 아래 미국을 비롯해 일본, 유럽 등 세계 각국에서는 모바일, 브로드밴드, 극소형 컴퓨터, IPv6의 기술이 창출해 내는 컴퓨팅 혁명의 실체를 유비궈터스 IT로 파악하고 각 국의 걸부, 기업, 연구소들이 주도권을 잡기 위해 많은 노력을 기울이고 있다. 현재 유비쿼터스 IT를 활용한 u-비즈니스를 활성화하고 관련 시장을 선점하기 위한 전 세계적인 경쟁은 매우 치열한 양상을 보이고 있다. 주요 국가들은 서로 지향하는 영역은 다르지만 궁극적으로 지능기반사회 구현이라는 대명제 아래 독자적인 산업 구축을 위해 노력하고 있다. 이러한 이유는 기본적으로 지능기반사회로의 이행과정에서 발생하는 경제적 파급효과, 예컨대 디지털 가전, 이동통신기기, 전자의료기기, 디스플레이, 2차 전지, 보안 등 관련 산업에 미치는 영향 및 새로운 시장 창출의 기회가 있기 때문이다. 기존의 많은 연구 및 문헌에서는 아직도 유비쿼터스 IT에 대한 개념적인 논의에 치중되어 있고 시장 중심적 또는 수요자 중심적 사고의 논의가 부족하다. 성공적으로 유비쿼터스 산업을 육성하기 위해서는 유비쿼터스 IT자체기술 개발사업(tangible service) 뿐만 아니라 비가시적(intangible) 서비스, 그리고 컨버전스(convergence) 서비스에 대한 상용화 모델과 성공적 사업 전개 방법론에 대한 깊은 연구가 수행되어야 한다. 본 연구에서는 먼저 유비쿼터스 IT의 기술동향과 시장 동향 및 산업 규모에 대한 문헌연구를 통해 u-비즈니스의 가능성을 고찰해보고, u-비즈니스 추진 전략을 탐색적으로 제시하고자 한다.되었다. SPME-GC/MS에 의한 휘발성분 분석 결과, 기능성 유지에서 홍국쌀 에탄올 추출물로부터 기인되는 특유의 휘발성분은 관찰되지 않았으나, RT=12.1 min인 hexanal의 함량이 control에 비하여 유의적인 감소 경향을 나타내는 것이 확인되었다(p<0.05).히지 못하여, 이의 기전을 밝히기 위한 추후 연구가 필요하다./TEX>로서 p<0.01 수준에서 현저히 증가하였다. 혈청의 인지질과 콜레스테롤 에스테르의 지방산 조성에서 vitamin C를 혼합 투여한 3,5,7군에서 PUFA 함량이 증가한 반면, SFA 함량은 감소하여 P/S 비율, n-3P/n-6P 비율은 증가하는 경향이었으며 이는 간장의 인지질, 콜레스테롤 에스테르, 총 지질의 지방산조성에서도 같은 경향을 볼 수 있었다.X>$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 대부분을 차지하였다. 야생 돌복숭아 과육 중의 지방산 조성은 포화지방산이 16.74%, 단불포화지방산 17.51% 및 다불포화지방산이 65.73%의 함유 비율을 보였는데, 이 중 다불포화지방산인 n-6계 linoleic acid$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 지질 구성 총 지방산의 대부분을 차지하는 함유 비율을 나타내었다.했다. 하강하는 약 4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것

• Journal of Nutrition and Health
• /
• v.45 no.5
• /
• pp.429-436
• /
• 2012

This study was performed to examine the characteristics of protein of red crab (Chionoecetes japonicus) shell powder hydrolyzed by commercial proteases. Red crab shell was digested by commercial proteases, such as Protamex (P), Neutrase (N), Flavourzyme (F), Alcalase (A), Protease M (PM) and Protease A (PA). Protein yield analyzed by Biuret assay, absorbance at 280 nm and brix revealed that PA was the enzyme having the highest proteolytic activity. SDS PAGE showed that molecular weight of proteins produced by protease treatments was various and below 150 kDa. Combinational treatment of proteases (PA + P, PA + PM, PA + F, PA + A) was tried whether these increase protein hydrolysis from red crab shell powder compared to a PA single treatment. Soluble protein content was similar, but amino acid concentration by combinational treatments was higher than PA single treatment [PA + P 247.4 mg/g > PA + F (206.4 mg/g) > PA + A (133.4 mg/g) > PA + PM (59.1 mg/g) > PA (54.9 mg/g)]. Amino acid composition by combinational treatments was slightly different. Most abundant essential amino acids were phenylalanine, glycine, alanine, and leucine, whereas tyrosine and cystine were not detected.

• Analytical Science and Technology
• /
• v.19 no.4
• /
• pp.290-300
• /
• 2006

Disinfection by-products(DBPs), such as volatile trihalomethanes and the nonvolatile organochlorine acids, created by chlorination have been extensively studied. However MX which contributes 20-50% of the mutagenic activity in drinking water began to people's attention since 1990. Its chemical name is 3-chloro-4-dichloromethyl-5-hydroxy-2(5H)-furanone. According to WHO guidelines its concentration should be controlled, but its value has not been set up. Due to analytical difficulties in measuring this compound at such a low concentrations and lack of information on toxicity to human. Because concentration (ng/L) of MX in drinking water is low traditional testing methods are ineffective. Therefore this study compared LLE and SPE and have chosen SPE to improve preconcentration. MX has been identified in chlorinated drinking water samples in several countries but not in korea Therefore this study analyzed concentration of MX in different water sources and in spring water. This study examined the causes of changing MX content. Chlorine dosage, seasons, water temperature and distance from the source was all discoverd to be relavant. MX was analyzed in various treatment to find optimum disinfection methods. The outcome was that the concentration of MX was minimized when using biological activated carbon-O3 and granular activated carbon.

• Analytical Science and Technology
• /
• v.22 no.6
• /
• pp.471-479
• /
• 2009

This study was performed to improve the analytical methods and re-establish the regulatory standard of PCBs-containing solid wastes for sufficient management in which has been concerned internationally. To do this, the sampling, pre-treatment and quantification methods which were used in USA and Japan were discussed. It was thought properly that new standard of PCBs-containing solid wastes was established through correlation with PCBs concentration of transformer oil. The surface wipe sampling was selected in the nonporous materials and cutting sampling in the porous materials. In the absence of transformer oils, electrical equipment is PCB-contaminated if it has PCBs at ${\geq}0.4{\mu}g/100cm^2$ as measured by a wipe test of a nonporous surface and if it has at 0.04 mg/L as measured by cutting test of a porous material. Also, new analytical methods for PCBs containing solid waste were proposed.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.9
• /
• pp.1013-1019
• /
• 2007

Electronic wastes have increased tremendously. However, any reliable treatment methodologies have rarely been established. Electronic wastes have posed serious disposal problem due to their physico-chemical stability. This paper investigated the application possibility of pyrolysis for the purpose of recycling the p-CCL(phenol based Copper Clad Laminate). Thermogravimetric analysis(TGA) was used to investigate the thermal decomposition pattern of p-CCL. We elucidated the characteristics of pyrolysis by-products at operating temperatures of 280, 350 and $600^{\circ}C$. GC/MS and FT-IR were used to characterize the liquid by-products along with general characterization methods such as Ultimate Analysis, Proximate Analysis and Heating Value, whereas general characterization methods were only introduced for the solid by-products. At a heating rate of $5^{\circ}C$/min, TGA curves exhibited three decomposition stages: (1) low-temperature decomposition region$(<280^{\circ}C)$, (2) medium temperature region$(280\sim350^{\circ}C)$ and (3) high-temperature region$(>350^{\circ}C)$. The major compounds of liquid by-products at low- and medium-temperatures were accounted for by water and phenol, whereas branched phenols and furans were major compounds at high-temperatures. As the temperature increases, volatile quantities decreased but the fixed carbon increased. High heating values of solid by-products($7,400\sim7,600$ kcal/kg) would suggest that the solid by-products could be applicable as fuel. In addition, high fixed carbon but low ash content of the solid by-products offered an implication that they are capable of being upgradable for adsorbent after applying appropriate activating process.