• 한국발생생물학회지:발생과생식
• /
• 제21권4호
• /
• pp.379-389
• /
• 2017

Connexin (Cx) involves in the regulation of various physiological functions of tissue by forming a channel, a gap junction which allows direct cell-cell communication, between adjacent cells. The effect of a single subcutaneous treatment of estradiol benzoate (EB) or flutamide (Flu) at the weaning age on the expression of Cx isoforms in the adult caput epididymis was evaluated in this research. Using quantitative real-time PCR analysis, a low-dose of EB [$0.015{\mu}g/kg$ body weight (BW)] caused significant decreases of Cx30.3, Cx32, Cx40, Cx43, and Cx45 mRNA levels and no change of Cx26, Cx31, Cx31.1, Cx37 transcript levels. The treatment of a high-dose EB ($1.5{\mu}g/kg\;BW$) resulted in reduced expression of Cx30.3, Cx31, Cx43, and Cx45 but increased expression of Cx37 and Cx40. Expression of all Cx isoforms examined, except Cx31, was significantly increased by the treatment of a low-dose Flu ($500{\mu}g/kg\;BW$). However, the treatment of a high-dose Flu (5 mg/kg BW) led significant expressional suppression of Cx30.3, Cx31, Cx31.1, Cx32, Cx40, Cx43, and Cx45 but an increase of Cx37 transcript level. With the comparison of previous findings, the expression of Cx isoforms in the adult epididymis after the exposure to EB or Flu is likely differentially regulated in regional-specific and/or exposed postnatal age-specific manner.

• 한국조경학회지
• /
• 제43권1호
• /
• pp.40-53
• /
• 2015

산업현장의 변화와 요구에 부응할 수 있는 인력을 체계적으로 양성하기 위하여 2001년에 국무조정실을 중심으로 NCS(National Competency Standards, 이하 NCS)와 국가자격체제(National Qualification Frameworks, 이하 NQF)의 도입이 결정되었다. 건설분야 내 조경 역시 2008년 "국가직무능력표준(NCS) -조경"이 시범 개발되어 2009년부터 3년간 시범운영되었다. 특히 2013년 출범한 박근혜 정부의 주요 국정과제 중 하나로 '학벌이 아닌 능력 중심의 사회 구현'이 채택되면서, 이를 실천하기 위한 구체적인 수단으로 NCS 체제 구축이 전국적으로 확산되고 있는 시점이다. 그러나 국가에서 개발한 NCS의 경우, 이상적인 직무수행능력을 명시하였기 때문에 각 대학의 학생수준의 차이, 기자재와 교수들의 확보문제, 현행교육과정의 시수 문제 등 실질적인 운영상의 문제점을 반영하지 못한 단점이 있으므로, 이를 현실적인 교육과정에 연착륙시키기 위해서는 현재의 교육과정과 NCS와의 차이 즉 갭(gap)을 명확히 분석하는 과정이 선행되어야 한다. 갭분석은 기존의 교육과정을 NCS 기반 교육과정으로 개편하기 위한 초기 단계의 방법론으로 NCS 능력단위별 능력단위요소와 수행준거를 기준으로 학과 내 기존 교육과정과의 괴리도 혹은 일치 정도를 1에서 5까지 리커트 척도를 활용하여 기입한 후 분석하는 방법이다. 이처럼 현재의 대학 내 교육과정과 NCS와의 일치 및 괴리 정도를 측정함으로써 향후 NCS 운영을 희망하는 대학에서는 NCS의 적용 가능성과 개발 운영 이후의 효과성을 검증할 수 있는 기초 도구를 확보할 수 있다. 갭분석을 통한 교육과정 개편의 장점으로는 첫째, 정부의 재정지원 사업과 연계하여 정성적인 학과별 NCS 도입률에 대한 정량적 지표를 제공할 수 있으며, 둘째, NCS 기반 교육과정 개편 시 부족한 혹은 포화상태인 부분에 대한 객관적인 기준을 제공해 준다. 즉, 해당 NCS 세분류 도입 시 부족한 능력단위 및 능력단위요소를 추출할 수 있으며, 기존 과목별 능력단위요소별로 보완 사항도 추출할 수 있는 동시에, 이를 통한 상세 강의계획서 및 기초 교과목 개설을 위한 방향성을 제시해 주는 장점이 있다. 다만, 현재까지 개발된 갭분석의 이론을 보완하여 보다 체계적으로 정비해야 하는 과제는 남아 있다. 교육부, 고용노동부는 산업현장의 요구를 교육훈련 및 자격에 체계적으로 반영하기 위해 관련 산업계 인사들이 모여 실무적인 차원에서 NCS 표준을 적극적으로 개발하고 보급하여야 하며, NCS 적용을 희망하는 대학에서는 일과 자격이 연계될 수 있는 교육과정을 NCS 기반으로 개편하여야 할 것이다. 이를 위해 대학에서는 관련 산업 전망 및 대학 내 교수자원과 지역 산업과의 관련성을 고려하여 적용하고자 하는 NCS 세분류를 명확히 선정하여야 할 것이다. 이후 NCS 기반 교육과정 개편을 위해 갭분석을 사용하여 개편의 방향과 기준을 보다 객관적이고 합리적으로 수립하여 교육과정명세서에 대한 명확한 논리적 근거를 확보하고 있어야 과정이수형 자격제도에 효율적으로 동참할 수 있을 것이다.

• International Journal of Contents
• /
• 제8권2호
• /
• pp.43-51
• /
• 2012

This study identifies the determinants of increasing privacy concerns in the mobile apps. The privacy affecting factors will be divided into the 3 categories on the basis of both users' and developers' perspective. First, this study explores whether the users' seeking value affects concern of the mobile apps privacy. Second, gender gap on the mobile privacy sensitivity will be tested. Third, this study identifies the meaning of apps developers' providing toolkit in the users' sensitivity on the privacy. The result showed that innovation among the customer's characteristics was identified the most significant factor to affect the mobile app privacy sensitivity. Ethical norm related variables (ethical identity, subjective norm and utilitarian value) were also identified as the meaningful variables in the mobile app privacy. Toolkits provided by app developers are also appeared a significant variable to affect the customer's app privacy sensitivity negatively. Finally gender also appears the meaningful factor in the mobile app privacy sensitivity.

• 산업기술연구
• /
• 제22권A호
• /
• pp.43-48
• /
• 2002

Acoustic modes of a vehicle compartment dominate the noise characteristics of the vehicle system in the low frequency range. Vehicle compartments have head liner and air gap of proper thickness to mount a interior lamp, as well as to have a good sound insulation and absorption performance. This study estimates the acoustic modal property of the medium size passenger car by experiment and by finite element analysis and also, investigates the effect of the head liner on the acoustic mode of the passenger compartment to obtain useful information for low noise compartment design.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.212.2-212.2
• /
• 2015

본 연구에서는 용액 공정을 통해 제작한 IGZO, ITZO 박막 트랜지스터의 전기적 특성을 비교, 분석하였다. 실험에 사용된 용액의 농도는 In:Zn:Ga, In:Zn:Sn = 1:1:1로 제작하여 Spin-Coating을 통해 증착하였다. 두 소자 모두 $350^{\circ}C$에서 열처리 공정을 진행한 뒤, 전기적 특성을 측정 및 분석하였다. IGZO 박막 트랜지스터의 경우, Threshold Voltage, S.Swing, Mobility, On/Off ratio가 각각 2.2 V, 0.42, $0.18cm^2/Vs$, $1.5{\times}$10^5로 측정되었으나 ITZO 박막 트랜지스터의 경우, -6.92 V, 0.91, $0.43cm^2/Vs$, $2.1{\times}$10^5 로 IGZO보다 Negative한 방향으로 이동하였다. 이는 Sn이 Ga에 비해 Band gap이 넓고, 산소와의 결합력이 작기 때문에, ITZO 박막 트랜지스터가 Oxygen vacancy형성을 통한 Carrier density가 높은 것으로 판단된다.

• 한국정밀공학회지
• /
• 제9권2호
• /
• pp.36-43
• /
• 1992

In this paper, a robot assembly wrist, which is able to assemble chamferless parts, has been developed. The RCC (Remote Center Compliance) structure is used as a basic structure. 5 position sensors and 4 pneumatic actuators are installed additionally to measure the deformation of RCC structure and correct the errors actively. Due to the restricted direction of actuation, a decision rule which selects the suitable actuator according to the position sensor signals is needed. For this purpose, a neural network is used and it is experimentally shown that the nerual network overcomes system's nonlinearity. This paper presents fundamental experiment results for the insertion of parts with several clearance.

• 대한소아치과학회지
• /
• 제10권1호
• /
• pp.77-83
• /
• 1983

The purpose of this study was to observe the microleakage of a pit and fissure sealant at the tooth-restoration interface. One hundred and sixty-seven extracted permanent and deciduous teeth were used and some simple mechanical pretreatment were done before etching. The degree of microleakage was assessed by $Ca^{45}$ after 24 hours, and 2 months. The results were as follows: 1. Among total 167 teeth, 53 teeth (32%) were demonstrated the microleakage. 2. After 2 months the leakage was increased from 22 percent to 35 percent in permanent teeth, and from 32 percent to 43 percent in primary teeth. 3. The group treated by fluoride paste was demonstrated the largest leakage, 50 percent in primary teeth and 33 percent in permanent teeth. There are more leakage in primary teeth (38%) than permanent teeth (28%).

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.72-78
• /
• 2004

In this paper, a development of an inductive position sensor is described. The sensor is similar to a radial magnetic bearing in that the sensor stator is shaped like a heteropolar magnetic bearing and is driven by a switching amplifier. A demodulation filter extracts the gap information from the switching current ripples. A prototype sensor exhibits the resolution of $0.43\mum$ and the dynamic bandwidth of about 800Hz. The dynamic performance can be improved by increasing the switching frequency. However, the eddy current effects become noticeable at high switching frequency, thus limiting the improvement of the bandwidth.

• Tribology and Lubricants
• /
• 제24권1호
• /
• pp.34-43
• /
• 2008

In this paper, an actively controlled aerostatic bearing is studied to overcome the defects of air bearing such as low stiffness and damping coefficients. The actively controlled aerostatic bearing is composed of aerostatic bearings, non-contact type of displacement sensors, piezoelectric actuators and controllers. The cylindrical capacitance sensor (CCS) is used as the displacement sensor. The reason for using CCS instead of the commercial gap sensor is that it can give us the pure error motion of the spindle because it removes the roundness error or the geometric errors in the spindle. The controller is designed by the state space equation and quadratic optimal control theory. The characteristic data of the actively controlled aerostatic bearing system in the frequency domain are presented and the stiffness and damping coefficients of the bearing are mentioned. This paper shows the possibility to reduce the motion error up to 6000 rpm.

• 한국생활과학회지
• /
• 제17권1호
• /
• pp.35-43
• /
• 2008

The purpose of this study is to develop evaluation tools for young children's mathematical ability based on the content standards of NCTM and to verify the suitability of the tools. The tools consist of 5 sub-tests with 90 items, including number and operation, algebra, geometry, measurement, data analysis and probability. The tool analysis was examined with 300 three-to five-years-old children and 31 math education professionals. The results of this research are as follows : First, in order of age the passing rate increased. The gap between high and low score group reveals a statistically meaningful difference. Second, the internal consistency reliability coefficient, Cronbach ${\alpha}$, is .96. Test-retest reliability is around .90. The concurrent validity correlation between this tools and Choi Hye-Jin's test(2003) is .85. The analysis of the content validity was proved appropriately by math education professionals.