• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.476-478
• /
• 2006

A prescaler is an essential building block for PLL-based frequency synthesizers and must satisfy high-speed and low-power characteristics. The design of D-flip flips used in the prescaler implementation is thus critical. In this paper a 64/65, 128/129 dual-modulus prescaler is designed using a $0.25{\mu}m$ CMOS process. In the design a new dynamic D-flip flop is employed, where glitches are minimized using discharge suppression scheme, speed is improved by making balanced propagation delay, and low power consumption is achieved by removing unnecessary discharge. The designed prescaler operates up to 2.5GHz and consumes 3.1mA at 2.5GHz operation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.5
• /
• pp.809-822
• /
• 2018

A quantitative risk assessment has been introduced to quantitatively evaluate fire risk as a means of performance based fire protection design in the design of railway tunnel disaster prevention facilities. However, there are insufficient studies to examine the effect of various risk factors on the risk. Therefore, in this study, the risk assessment was conducted on the model tunnel in order to examine the effects of the evacuation start time delay and the fire growth curve on the quantitative risk assessment. As a result of the analysis of the scenario, the fatalities occurred mainly when escapes in the same direction as the direction of the fire smoke movement. In addition, after the FED exceeded 0.3, the maximum fatalities occurred within 10 minutes. In the range of relatively low risk, distance between cross passages, evacuation delay time and fire growth curve were found to affect the risk, but they were found to have little effect on the condition that the risk reached the limit. Especially, in this study, it was evaluated that the evacuation delay time reduction, fire intensity and duration reduction effect were not observed when the distance between cross passages was more than 1500 m.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.10
• /
• pp.1085-1089
• /
• 2004

An impedance properties of the positive active material Li(Cr$_{0.4}$Mn$_{0.6}$)O$_2$ are measured by the changeable trend to the time. The charge-discharge capacities of 297 mAh(g)$^{-1}$ 175 mAh(g)$^{-1}$ are obtained by the made cell with the active material that the Cr was added to LiMnO$_2$ to prevent structural degradation of an electrode active material with impedance of 75 Ω to get at an initial hour. Resultantly, these variations which the impedances enhanced continually, were not watched the impeditive variations as the results of the delay time that the positive thin films and the references have been soaked all together in the solution of electrolyte of 1M LiPF$_{6}$ EC/DEC(l/2). Accordingly, it means an amount increased of the discharged capacities in the view of the results that the impeditive values were decreased are known already through a authorized paper.per.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.21 no.2
• /
• pp.27-37
• /
• 2008

Purpose: This study was conducted to investigate the effects of Ginseng Radix Alba extract solution on the cell cycle regulation, apoptosis of human uterine myoma cells. Methods: Primary cultured human uterine myoma cells were treated with extract solution of Ginseng Radix Alba concentration of 1, 10 and $100mg/m{\ell}$ for 48 hours. We underwent flow cytometry and western blotting for cell cycle and apoptosis related factors. Results: In flow cytometry, a slight promotion of G1 phase in $1mg/m{\ell}$ group had been observed but, simultaneously a delay of G1 phase in 10 and $100mg/m{\ell}$ groups were also observed. The manifestation of cyclin D1 in Ginseng Radix Alba extract solution medicated group increased compared to the control group. The manifestation of Bax controlling apoptosis increased in terms of concentration but Bcl-2 showed no change. Also VEGF increased in terms of concentration. Conclusion: The present study suggests that Ginseng Radix Alba extract solution treatment in human uterine myoma cells induce the delay of cell cycle and apoptosis. These results suggest that Ginseng Radix Alba will be a promising agent for use in therapeutics agents against human uterine myoma.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.322-328
• /
• 2019

The purpose of this study was to provide basic data for maintenance and repair of the forest road surfaces using the light drop weight test (LDWT), density test, and grain size analysis at four sites in Yeongyang-gun Mt. (2011y, 2014y, 2016y, and 2017y). In terms of the density test results, the opening density in 2011 was the highest at $2.0694g/cm^3$, and the opening density in 2017 was the lowest at $1.7443g/cm^3$. The grain size analysis showed that the proportion of large aggregates was highest at the opening in 2017, and the proportion of large aggregates decreased with the delay of opening date. From the LDWT results, $E_{vd}$ (the dynamic deformation coefficient) of the 2011y forest road was $35.7MN/m^2$, 2014y was $30.5MN/m^2$, 2016y was $28.6MN/m^2$, and 2017y was $23.5MN/m^2$. The $E_{vd}$ value for the oldest forests opened with the 2011y forest road was the highest, the average $E_{vd}$ value of the center portion was $21.45MN/m^2$, the average $E_{vd}$ value of the wheel portion of the banking part was $31.31MN/m^2$, and the average $E_{vd}$ value of the wheel portion of the cut part was $36.71MN/m^2$.

• 연구논문집
• /
• s.24
• /
• pp.129-140
• /
• 1994

Design and implementation of monitoring and control system using dual-microprocessor node is presented for real time process. The proposed system is implemented with 2 of the single chip microprocessors in tightly coupled mode and results in speed up of $s_p=1.74.$ Under the assumption that the nodes are interconnected in multidrop. the overall system performance such as average throughout-delay characteristics and effective throughput are analyzed using M/G/1 gueueing model, and results show that the proposed node can be used to medium sized distributed monitoring and control system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.2
• /
• pp.250-255
• /
• 2001

Effect of molding temperature on the quality changes of extruded meju was studied. Meju was molded at 8$0^{\circ}C$, 6$0^{\circ}C$ and 4$0^{\circ}C$, and then stored at $25^{\circ}C$ with 50% of relative humidity for 30 days. The texture of the cooked soybean grain showed that the firmness and cohesiveness were increased, and consistency was decreased by decrease of molding temperature. The density of the meju molded at 8$0^{\circ}C$, 6$0^{\circ}C$ and 4$0^{\circ}C$ were 1.072g/mL, 1.079g/mL and 1.203g/mL, respectively. The meju molded at 4$0^{\circ}C$ had significantly higher density than those molded at 8$0^{\circ}C$ or 6$0^{\circ}C$. Also, delay of water evaporation, acidification, and rapid growth of fungal mycellium were observed on the sample with molding temperature at 4$0^{\circ}C$ during fermentation. Activity of amylase and protease, contents of total reducing sugar and amino nitrogen of 4$0^{\circ}C$-molded meju were represented lower level than those of 6$0^{\circ}C$ or 8$0^{\circ}C$-molded sample. Therefore, it was considered that the molding temperature was an important factor for meju fermentation and molding temperature of 6$0^{\circ}C$ or over would be acceptable.

• Food Science of Animal Resources
• /
• v.41 no.2
• /
• pp.288-299
• /
• 2021

Biofilm formation of Geobacillus thermodenitrificans, Geobacillus thermoglucosidans and Anoxybacillus flavithermus in milk on stainless steel were monitored at 55℃, 60℃, and 65℃ for various incubation times. Although species of Geobacillus showed a rapid response and produced biofilm within 4 h on stainless steel, a delay (lag time) was observed for Anoxybacillus. A hyperbolic equation and a hyperbolic equation with lag could be used to describe the biofilm formation of Geobacillus and Anoxybacillus, respectively. The highest biofilm formation amount was obtained at 60℃ for both Geobacillus and Anoxybacillus. However, the biofilm formation rates indicated that the lowest rates of formation were obtained at 60℃ for Geobacillus. Moreover, biofilm formation rates of G. thermodenitrificans (1.2-1.6 Log10CFU/mL∙h) were higher than G. thermoglucosidans (0.4-0.7 Log10CFU/mL∙h). Although A. flavithermus had the highest formation rate values (2.7-3.6 Log10CFU/mL∙h), this was attained after the lag period (4 or 5 h). This study revealed that modeling could be used to describe the biofilm formation of thermophilic bacilli in milk.

• Journal of Information Processing Systems
• /
• v.8 no.4
• /
• pp.589-602
• /
• 2012

With the increasing demand for real time applications in the Wireless Senor Network (WSN), real time critical events anticipate an efficient quality-of-service (QoS) based routing for data delivery from the network infrastructure. Designing such QoS based routing protocol to meet the reliability and delay guarantee of critical events while preserving the energy efficiency is a challenging task. Considerable research has been focused on developing robust energy efficient QoS based routing protocols. In this paper, we present the state of the research by summarizing the work on QoS based routing protocols that has already been published and by highlighting the QoS issues that are being addressed. The performance comparison of QoS based routing protocols such as SAR, MMSPEED, MCMP, MCBR, and EQSR has also been analyzed using ns-2 for various parameters.

• Annual Conference of KIPS
• /
• 2008.05a
• /
• pp.1003-1006
• /
• 2008

인터넷상에서 TCP 프로토콜은 사실상 표준으로써 널리 이용되고 있다. 그러나 네트워크 환경이 발전해 감에 따라서 무선 네트워크, CDMA, 3G 네크워크등 다양한 환경이 공존하게 되었고, 이러한 환경에서 TCP의 성능저하가 이슈가 되어 많은 연구가 진행되었으며, 많은 알고리즘들이 발표되었다. 본 논문에서는 무선환경에서 다양한 TCP 성능저하 원인 중에서 spurious RTO에 관한 문제를 해결하고자 한다. 이 전의 연구인 E-RTO는 delay spike문제를 효과적으로 다루고 있다 하지만 delay spike이후 혼잡 윈도우를 회복하는 과정을 효과적으로 다루고 있지 못하다. 우리는 BCR를 제안하여 이러한 문제를 해결하고자 한다. BCR의 성능평가는 NS2를 이용하여 이루어 졌으며 throughput, goodput에서 좋은 성능을 보여주고 있다.