• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.12
• /
• pp.1580-1587
• /
• 2000

Rayleigh scattering and laser induced predissociative fluorescence are employed for capturing two-dimensional images of temperature and species concentration in a laminar nonpremixed flame of a diluted hydrogen jet. Rayleigh scattering cross-sections are experimentally obtained ar 248nm. Dispersed LIPF spectra of OH and O$_2$ are also measured in a flame in order to confirm the excitation of single vibronic state of OH and O$_2$ .OH and O$_2$ are excited on the P$_1$(8) line of the A $^2\Sigma ^+(v^`=3) - X^2\pi (V^"=0)$ band and R(17) line of the Schumann-Runge band B $^3\Sigma _u^-(v^`=0) - X ^3\Sigma _g^-(v^"=6)$, respectively. Fluorescence spectra of OH and Hot O$_2$ are captured and two-dimensional images of the hydrogen flame field are successfully visualized.

• Journal of Hydrogen and New Energy
• /
• v.13 no.3
• /
• pp.169-180
• /
• 2002

Rayleigh scattering and laser induced predissociative fluorescence are used to obtain two-dimensional images of temperature and species concentration in a laminar non-premixed flame of a diluted hydrogen jet. Rayleigh scattering cross-sections are experimentally obtained at 248nm. Planar images of OH and $O_2$ with tunable KrF excimer laser which has a) $0.5cm^{-1}$ linewidth, b) 0.5nm tuning range, c) 150mJ pulse energy, and d) 20ns pulse width are obtained to determine spatial distributions of OH and $O_2$. The technique is based on planar laser induced predissociative fluorescence (PLIPF) in which collisional quenching is almost avoided because of the fast predissociation. Dispersed LIPF spectra of OH and $O_2$ are also measured in a flame in order to confirm the excitation of single vibronic state of OH and $O_2$. OH and $O_2$ are excited on the $P_2$(8) and $Q_1$(11) line of the $A^2{\Sigma}^{+}({\nu}^{'}=3)-X^{2}{\Pi}({\nu}^{''}=o)$ band and R(17) line of the Schumann-Runge band $B^{3}{\Sigma}_{u}{^-}(\nu^{'}=0)-X^{3}{\Sigma}_{g}{^-}({\nu}^{''}=6)$, respectively. Fluorescence spectra of OH and Hot $O_2$ are captured and two-dimensional images of the hydrogen flame field are successfully visualized.

• Steel and Composite Structures
• /
• v.33 no.1
• /
• pp.37-66
• /
• 2019

In cold-formed steel structures, such as trusses, wall frames and portal frames, the use of back-to-back built-up cold-formed stainless-steel lipped channels as compression members are becoming increasingly popular. The advantages of using stainless-steel as structural members are corrosion resistance and durability, compared with carbon steel. The AISI/ASCE Standard, SEI/ASCE-8-02 and AS/NZS do not include the design of stainless-steel built-up channels and very few experimental tests or finite element analyses have been reported in the literature for such back-to back cold-formed stainless-steel channels. Current guidance by the American Iron and Steel Institute (AISI) and the Australian and New Zealand (gAS/NZS) standards for built-up carbon steel sections only describe a modified slenderness approach, to consider the spacing of the intermediate fasteners. Thus, this paper presents a numerical investigation on the behavior of back-to-back cold-formed stainless-steel built-up lipped channels. Three different grades of stainless steel i.e., duplex EN1.4462, ferritic EN1.4003 and austenitic EN1.4404 have been considered. Effect of screw spacing on the axial strength of such built-up channels was investigated. As expected, most of the short and intermediate columns failed by either local-global or local-distortional buckling interactions, whereas the long columns, failed by global buckling. All three grades of stainless-steel stub columns failed by local buckling. A comprehensive parametric study was then carried out covering a wide range of slenderness and different cross-sectional geometries to assess the performance of the current design guidelines by AISI and AS/NZS. In total, 647 finite element models were analyzed. From the results of the parametric study, it was found that the AISI & AS/NZS are conservative by around 10 to 20% for cold-formed stainless-steel built-up lipped channels failed through overall buckling, irrespective of the stainless-steel grades. However, the AISI and AS/NZS can be un-conservative by around 6% for all three grades of stainless-steel built-up channels, which failed by local buckling.

• Coupled systems mechanics
• /
• v.4 no.4
• /
• pp.279-295
• /
• 2015

The article presents a theoretical-experimental approach developed for modeling the coefficient of sliding friction in the dynamic system tool-workpiece in slide diamond burnishing of low-alloy unhardened steels. The experimental setup, implemented on conventional lathe, includes a specially designed device, with a straight cantilever beam as body. The beam is simultaneously loaded by bending (from transverse slide friction force) and compression (from longitudinal burnishing force), which is a reason for geometrical nonlinearity. A method, based on the idea of separation of the variables (time and metric) before establishing the differential equation of motion, has been applied for dynamic modeling of the beam elastic curve. Between the longitudinal (burnishing force) and transverse (slide friction force) forces exists a correlation defined by Coulomb's law of sliding friction. On this basis, an analytical relationship between the beam deflection and the sought friction coefficient has been obtained. In order to measure the deflection of the beam, strain gauges connected in a "full bridge" type of circuit are used. A flexible adhesive is selected, which provides an opportunity for dynamic measurements through the constructed measuring system. The signal is proportional to the beam deflection and is fed to the analog input of USB DAQ board, from where the signal enters in a purposely created virtual instrument which is developed by means of Labview. The basic characteristic of the virtual instrument is the ability to record and visualize in a real time the measured deflection. The signal sampling frequency is chosen in accordance with Nyquist-Shannon sampling theorem. In order to obtain a regression model of the friction coefficient with the participation of the diamond burnishing process parameters, an experimental design with 55 experimental points is synthesized. A regression analysis and analysis of variance have been carried out. The influence of the factors on the friction coefficient is established using sections of the hyper-surface of the friction coefficient model with the hyper-planes.

• Parasites, Hosts and Diseases
• /
• v.27 no.2
• /
• pp.101-108
• /
• 1989

This study was performed to observe the role of Pneumocystis carinii as an etiologic agent of interstitial pneumonia in immunocompromised hosts. Total 90 male Sprague-Dawley rats, approxi. mately 150-180 g, were used. Fifteen of them were used as control group and remaining 75 (5 groups) were as immunosuppression groups; group 1 received prednisolone (25 mg/kg twice weekly) only; group 2 Prednisolone and tetracycline (75 mk/kg/day) ; group 3 Prednisolone, tetracycline and trimethoprim-sulfamethoxasole (50~250 mg/kg/day) : group 4 prednisolone and trimethoprim-sulfamethoxasole; and group 5 prednisolone and griseofulvin (300 mg/kg/day) until death. The survival days of each group rat were calculated, and upon death their lungs were removed immediately and then stamp smears were prepared and stained by Giemsa or toluidine blue O. For histopathologic observation, lungs were fixed in 10% formalin, cut into sections and stained with Gomori's methenamine silvei, hematoxylin-rosin, and Brovkn & Brenn stain. The results obtained were as follows: 1. The mean survival time of each group rat was 19.3$\pm$5.2 days (group 1), 41.1$\pm$14.0 days (group 2), 50.5$\pm$18.4 days (group 3), 43.0$\pm$22.9 days (group 4) or 21.8$\pm$5.1 days (group 5). Significant differences were noted between group 1 and group 2(p<0.01), group 1 and group 3 (p<0.01), and group 1 and group 4 (p<0.01), which represented bacterial infections were most fatal in immunocompromised rats. Group 5 revealed no difference in the survival day from group 1, while significant differences were noted between group 2 and group 5(P<0.01), group 3 and group 5(p<0.01), and group 4 and group 5(p<0, 01), which represented little importance of fungal infection as the cause of death of the rats. 2. The first fatality due to p. carinii pneumonia occurred 17 days after the beginning of the immunosuppression. The occurrence rate of P. carinii pneumonia in the decreasing order was 92.9% (group 3), 80.0% (group 2 and group 5), 78.6% (group 4) and 33.3% (group 1). With regard to the pathological stage of P. carinii pneumonia, the stage 1 was 11.3%, the stage 2, 28.3%, and the stage 3, 60.4%. 3. Viewing from the duration of immunosuppression, bacterial pneumonia chieay appeared in 1 month, mixed infections (P. carinii and bacteria, or p. carinii and fungi) in 1~2 months, and pure P. carinii pneumonia after 2 months. The present study revealed that P. carinii pneumonia was the most important cause of death of immunocompromised rats later than 1 month after the start of immunosuppression.

• Journal of Chest Surgery
• /
• v.31 no.9
• /
• pp.884-892
• /
• 1998

Background: The gastroepiploic artery is not only an alternative graft but also may be considered an important primary graft for coronary revascularization. However, the long-term patency of the gastroepiploic arterial graft is yet to be determined and the incidence of perioperative spasm and long-term patency of a coronary graft may be affected by the properties of the graft response to certain vasoactive substances. The reactivity of the gastroepiploic artery to vasoactive substances has not been studied extensively and the results of the studies are contradictory. Material and Method: This study was designed to test the reactivity of human gastroepiploic artery to four constrictors and four relaxants. The middle sections of the human gastroepiploic arteries were collected from the patients undergoing gastrectomy and the arterial rings with intact endothelium were suspended in organ baths for isometric tension recording. Result: Epinephrine, norepinephrine, and potassium chloride induced the maximum constriction to higher forces (7.0$\pm$1.1g, 6.6$\pm$0.9g, and 6.5$\pm$1.1g) than 5-hydroxytryptamine did (3.8$\pm$1.7g, p<0.05). Nitroprusside and histamine induced almost full relaxation in the gastroepiploic arteries preconstricted with norepinephrine. There was no significant difference between two relaxants regarding maximum relaxation force. Acetylcholine induced the maximum relaxation to weaker force when compared with nitroprusside and histamine (p<0.05), and isoproterenol was the weakest of the relaxants (p<0.05 compared with acetylcholine). Conclusion: The gastroepiploic artery has a strong capacity of endothelium-dependent relaxation which could have an important influence on long-term patency. The gastroepiploic artery exhibits a potent contractility to catecholamines and the enhanced contractility may facilitate vasospasm in the presence of high circulating levels of catecholamines. Nitroprusside, a potent relaxant in gastroepiploic artery, might be beneficial for the treatment of gastroepiploic arterial graft spasm. The gastroepiploic arterial graft with intact endothelium may respond weakly to beta-adrenoceptor agonist and 5-hydroxytryptamine.

• Applied Microscopy
• /
• v.16 no.2
• /
• pp.1-13
• /
• 1986

The purpose of this study was to investigate the morphology and intercellular junctions of the odontoblast of dental pulp in the rat incisor by means of the freeze fracture electron microscopy. Twenty male Sprague-Dawley rats weighing $150{\sim}200g$ were used. After being anesthetized by an intraperitoneal injection of 0.5 ml sodium pentobarbital per kg in body weight(60 mg/ml) the animals were perfused with 2.5% glutaraldehyde-2% paraformaldehyde fixative in 0.1 M cacodylate buffer, pH 7.2 through the ascending aorta for one hour. The incisors were carefully extracted from the jaws and demineralized by suspending them in 0.1 M EDTA in 3% glutaraldehyde (pH 7.2) for two weeks. After demineralization, the specimens were obtained from the portion divided into five equal parts. For freeze-fracture replication, demineralized tissues were infiltrated for several hours with 10%, 25% glycerol in 0.1M cacodylate buffer as a cryoprotectant and then frozen in liquid Freon 22 and stored in liquid nitrogen. Fracturing and replication were done in Balzers BAF 400D high-vacuum freeze-fracture apparatus at $-120^{\circ}C$ under routine $5X10^{-7}$ Torr vacuum. The tissue was immediately replicated with platinum unidirectionally at $45^{\circ}$ angle and reinforced with carbon at $90^{\circ}$ angle unidirectionally or by using a rotary stage. The replication process was monitored by a quartz-crystal device. The replicas were immersed in 100% methanol overnight. The tissue was then digested from the replica by clorox (laundry bleach), placed into 5% EDTA, and washed repeatedly with distilled water. The replicas were picked up on 0.3% formvar-coated 75 mesh grids and examined in the JEOL 100B electron microscope. The results were as follows; 1. Both in thin sections and freeze-fracture replicas, three types of intercellular junctions were recognizable in the plasma membrane of odontoblast: gap junction, tight junction and desmosome-like junction. 2. The nuclear pores were evenly distributed over the nuclear envelope. The pore complex formed a ring about 70 nm in diameter. 3. Gap junctions were found between odontoblasts as well as odontoblasts and neighbouring pulp cells (fibroblast, subodontoblastic cell process, nerve-like fibre). Gap junctions, which were round, ellipsoid and pear-shaped and 600 nm in diameter, were observed in the odontoblast. 4. Numerous round and ellipsoid gap junctions could be frequently seen on the plasma membranes in cell body and apical part of the odontoblasts. On the P face, the junctions were recognized as a cluster of closely packed particles, measuring about 9 nm in diameter, and on the E face, the junctions were recognized as a shallow grooves.

• Tuberculosis and Respiratory Diseases
• /
• v.41 no.5
• /
• pp.513-520
• /
• 1994

Background: The pathogenesis of silicosis has been focused on the interaction between alveolar macrophages and silica particle. Although fibrosis in silicosis has been studied extensively, the mechanism is still not fully understood. There is increasing evidence that monokines and arachidonic acid metabolites macrophage are involved in pathogenesis of silicosis. Recently, it was reported that prostaglandin E2 produced from macrophage counteracts the stimulatory effects of other monokines on fibroblast proliferation or collagen production. Until now, it was remained uncertain by which mechanism silica particle may activate alveolar macrophage to an enhanced release of prostaglandin E2. Methods: In order to investigate the relationship between the activity of alveolar macrophage and the production of $PGE_2$ from activated alveolar macrophage, the authors measured hydrogen peroxide and $PGE_2$ from alveolar macrophages activated by silica in vitro and from alveolar macrophages in the silicotic nodules from rat. Experimental silicosis was induced by intratracheal infusion of silica($SiO_2$) suspended in saline(50 mg/ml) in Sprague-Dawley rats. Results: produced by 1) The silicotic nodules with fibrosis were seen from the sections of rat lung at 60 days after intratracheal injection with 50 mg aqueous suspension of silica(Fig. 1). 2) In vitro, silica caused the dose dependent increase of hydrogen peroxide(p<0.05, Fig. 2A) and $PGE_2$(p>0.05, Fig. 2B) release from alveolar macrophages. Alveolar macrophages from rat with silicotic nodules released more hydrogen peroxide and $PGE_2$ than those of control group(p<0.05, Fig. 3). Conclusion: These results suggest that silica particle could activate macrophage directly and enhanced the release of $PGE_2$ and hydrogen peroxide from the alveolar macrophage.

• Tuberculosis and Respiratory Diseases
• /
• v.50 no.4
• /
• pp.426-436
• /
• 2001

Background : Chronic obstructive pulmonary disease(COPD) is one of the major contributors to morbidity and mortality among the adult population. Cigarette smoking(CS) is undoubtedly the single most important factor in the pathogenesis of COPD. However, its mechanism is unclear. The current hypothesis regarding the pathogenesis of COPD postulates that an imbalance between proteases and antiproteases leads to the destructive changes in the lung parenchyma. This study had two aims. First, to evaluate the effect of CS exposure on histologic changes of the lung parenchyme, and second, to evaluate the effect of CS exposure on the expression of the gelatinolytic enzymes in BAL fluid cells in guinea pigs. Methods : Two groups of five guinea pigs were exposed to the whole smoke of 20 commercial cigarettes per day, 5 hours/day, 5 days/week, for 6weeks, and 12 weeks, respectively, using a smoking apparatus. Five age-matched guinea pigs exposed to room air were used as controls. Five or more sections were microscopically extamined(${\times}400$) and the number of cellular infiltration of the alveolar wall was measured in order to evaluate the effect of CS exposure on the histologic changes of lung parenchyme. The statistical significance was analyzed by a linear regression method. To evaluate the expression of the gelatinolytic enzymes in intraalveolar cells, BAL fluid was obtained and the intraalveolar cells were separated by centrifugation (500 g for 10 min at $4^{\circ}C$). Two sets of culture plates were loaded with $1{\times}10^6$ intraalveolar cells. One plate, contained O.1mM EDTA, a inhibitor of matrix metalloproteases(MMPs), and the other plate had no EDTA. Both plates were incubated for 48 hours at $37^{\circ}C$. After incubation, gelatinolytic protease expression in the supernatants was analyzed by gelatin zymography. Results : At the end of CS exposure, the level of blood carboxy Hb had increased significantly(4.1g/dl in control group, 24g/dl immediately after CS exposure, 18g/dl 30 min after CS exposure, 15g/dl 1 hour after CS exposure). Alveolar inflammatory cells were identified in the CS exposed guinea pigs. The number of alveolar cellular cells observed in a microscopic field ($400{\times}$) was $121.4{\pm}7.2$, $158.0{\pm}20.2$, $196.8{\pm}32.8$, in the control, the 6 weeks, and the 12 weeks group, respectively. The increased extent of inflammatory cellular infiltration of the lung parenchema showed a statistically significant linear relationship with the duration of CS exposure(p=0.001, $r^2=0.675$). Several types of gelatinolytic enzymes in the intraalveolar cells of CS exposed guinea pigs were expressed, of which some were inhibited by EDT A. However, the gelatinolytic enzymes were not expressed in the control groups. Conclusion : CS exposure increases inflammatory cellular infiltration of the alveolar wall and the expression of gelatinolytic proteases in guinea pigs. EDTA inhibits some of the gelatinolytic proteases. These findings suggest a possibility that CS exposure may increase MMP expression in the lungs of guinea pigs.

• Journal of Acupuncture Research
• /
• v.18 no.3
• /
• pp.56-68
• /
• 2001

Objective : Functional brain mapping study on acupuncture stimulation using the [14C]2-deoxyglucose([14C]2-DG) autoradiography provides quantitative data and visualized pathway in central nervous system(CNS). We aimed to investigate the neural pathway and spatial distribution of metabolic activity elicited in CNS on electroacupuncture stimulation using [14C]2-DG autoradiography. Methods : The study were divided into three groups by stimulation times. 45-mins stimulation group according to Sokoloffs method, 5-mins stimulation group according to Duncun's method, and 15-mins stimulation group. ;A venous catheter was equipped into right jugular vein. The rats (Sprague-Dawley rats, 230-260g) were kept fastened loosely on a holding platform without anesthesia. Electroacupuncture stimulation (5 ms, 2 Hz, 1~3 mA) were applied on the left Zusanli (ST36) acupoint and [14C]2-DG ($25{\mu}Ci/rat$) injection was performed through the catheter. After sacrifice, the brain and the spinal cord were made to sections for film image. The film images were digitalized as the isotope concentration based upon comparison of optical densities with that of the standards and normalized by the optical density of corpus callosum. Results : 1. 15-mins stimulation group was most effective among 3 experiments. 2. On 15-mins stimulation group, medial geniculate nucleus, intetpeduncular nucleus intermedius, ventral periolivary nucleus, caudal periolivary nucleus, medial superior olive, lateral paragigantocellular nucleus, including hypothalamic arcuate nucleus were increased by more than 25% (at least, p<0.05) by electroacupuncture stimulation. 3. Especially, the metabolism in hypothalamic arcuate nucleus was increased by 90% (p<0.05). 4. The fact that arcuate nucleus of hypothalamus might play a role of interconnection area between ascending and descending pathway of acupuncture stimulation was demonstrated visually. Conclusions : Advanced study on electroacupuncture stimulation elicited significant increase of metabolic activity in various nuclei of hypothalamus will provide the important experimental basis in research of the relationship between electroacupuncture stimulation and internal visceral functions.