• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.6
• /
• pp.883-887
• /
• 2015

This study investigated the quality of seven commercial salted and fermented sand lance Ammodytes personatus sauces by measuring their chemical compositions, bacteria concentrations, and biogenic amine contents. The sauces had a 63.97-67.32% (mean: 65.72%) moisture content, 23.16-24.03% (mean: 23.60%) salinity, 5.51-6.14 (mean: 5.81) pH, 164.76-217.98 mg/100 g (mean: 182.97 mg/100 g) volatile basic nitrogen, 0.94-1.42% (mean: 1.24%) total nitrogen, and 673.77-791.86 mg/100 g (mean: 720.76 mg/100 g) amino nitrogen content. Viable cell counts ranged from $1.2{\times}10^1$ to $2.9{\times}10^2CFU/mL$, and number of biogenic amine-forming bacteria was very low or not detected. Overall, the tested samples had average levels of histamine of 301.02 mg/kg, cadaverine of 29.78 mg/kg, tyramine of 199.21 mg/kg, putrescine of 183.00 mg/kg, and tyramine of 13.01 mg/kg. This strongly suggests that it is necessary to monitor the biogenic amine contents of commercial salted and fermented sand lance sauces carefully to ensure consumer health.

• Journal of Environmental Science International
• /
• v.9 no.2
• /
• pp.137-144
• /
• 2000

The observations on the seasonal fluctuation and distributional characteristic of organic matters on surface sediments and its origin were carried out at the 25 stations in Keogeum-sudo, southern coast of Korean Peninsula from February to October in 1993. I made an analysis on the environmental factors for surface sediments such as temperature, ignition loss, chemical oxygen demand, pheopigment, total sulphide, water content, mud content in grain size, COD/IL ratio and COD/sulphide ratio. The results are as follows ; 1) The range of temperature on the surface sediments was between 6.2${\circ}C$ and 24.6${\circ}C$. The highest mean temperatuer of mud was 24.0${\circ}C$ in summer, the lowest 6.6${\circ}C$ in winter. 2) Ignition loss(IL) fluctuated between 1.2% in winter and 16.8% in spring, that is to say, the seasons of increasing in temperature were very high ignition loss. 3) Chemical oxygen demand(COD) showed the highest mean value of 20.52 mg/g dry in summer within the range of 15/46~32.78 mg/g dry, while showed the lowest of 5.79 mg/g dry in winter within the range of 7.4~17.39 mg/g dry. 4) Pheopigment concentrations showed the highest mean value of 4.85 $\mu\textrm{g}$/g dry in autumn within the range of 0.84~9.21 $\mu\textrm{g}$/g dry, while it did the lowest mean value of 1.97 $\mu\textrm{g}$/g dry in summer within the range of 0.23~4.83 $\mu\textrm{g}$/g dry. 5) Total sulphide (H2S) fluctuated between no detect(ND) in spring, and 2.43 mg/g dry in sutumn. The highest mean value was 0.68 mg/g dry in sutumn, the lowest was 0.16 mg/g dry in spring. 6) Water content(WC) and mud content in grain size showed the mean value of 43.2% within the range of 26.5~59.7% and 91.0% within the range of 57.8~99.2%, respectively. 7) By the analytical results on the source of organic matter, it had been dumped from the seaweed farms in Keogeum-sudo coastal waters.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.1
• /
• pp.10-18
• /
• 2010

To provide necessary information for future environmental monitoring of smelting and litharge making industries in Korea, environmental monitoring dataset of air lead concentration of 4 lead industries(1 primary smelting, 2 secondary smelting and 1 litharge making industry) were analyzed from 1994 to 2007. Data were compared using geometric mean and standard deviation with minimum and maximum values according to year of measurement, type of lead industries and type of operation of lead industries. The geometric mean and standard deviation of air concentration for a total of 1140 samples in all lead industries for overall 14 years were 70.7${\mu}g/m^3$ and 5.51 with minimum of 1${\mu}g/m^3$ and maximum of 9,185 ${\mu}g/m^3$. The overall geometric means of air concentration were above the permissible exposure levels(PEL) until year of 2001 and thereafter they were remained at the level of half of PEL. The geometric means of primary smelting, secondary smelting and litharge making industry for overall 14 years were 21.7${\mu}g/m^3$(number of samples: 353), 82.5${\mu}g/m^3$(number of samples: 357) and 164.2 ${\mu}g/m^3$(number of samples: 430) respectively. In primary smelting industry, the highest geometric mean air concentration was 35.4 ${\mu}g/m^3$ in the secondary smelting operation; followed by casting operation (24.9 ${\mu}g/m^3$) and melting operation (14.9 ${\mu}g/m^3$), respectively. On the other hand, in secondary smelting industries, the highest geometric mean air concentration was 125.4${\mu}g/m^3$ in melting operation; followed by casting operation (90.5${\mu}g/m^3$) and pre-treatment operation (43.4${\mu}g/m^3$), respectively. However, in litharge making industries, there were no significant differences of geometric mean air concentrations between litharge operation and stabilizer operation. The proportion of over PEL (50${\mu}g/m^3$) was highest in litharge industry and followed by secondary smelting industries. However The proportions of over PEL(${\mu}g./m^3.$) were decreased by the years of environmental monitoring. The significant reduction of mean air lead concentration since year of 2000 was observed due to more active environmental engineering control and new introduction of new operation in manufacturing process, but may be also influenced by non-engineering method such as reduction of operation hours or reduction of exposure time during actual environmental measurement by industrial hygienist according to more strict enforcement of occupational and safety law by the government.

• Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.59-63
• /
• 2002

Swim up fry of the Nile tilapia, Oreochromis niloticus, were fed 0 or 60 mg l7-methyltestos­terone (MT) per kg feed for 30 days. Fish that had been fed 0 or 60 ppm MT for the first 30 days were subsequently fed a commercial diet for 56 weeks to evaluate growth, survival, sex ratio, body composition, gonadosomatic index and the total edible portion. Mean body weight of MT treated group and untreated group were 1.7 g and 1.1 g, respectively at the end of the treatment for 30 days $(P<0.05)$. The experiment was terminated after a total of 60 weeks, the mean body weight of the MT treated population was 1,016 g and that of the untreated population was 762g $(P<0.05)$. However, the final mean body weight of untreated males (l, 086g) was not significantly different from treated males (l,016 g), but the mean body weight of the female group was 512 g. Therefore, the reason for the lower mean body weight of the untreated group was entirely due to stunted females. The percentage fillet yield of MT treated fish$(34.6\%)$ was not significantly different from that of the untreated males $(34.4\%)$, but the untreated females were lower than those of both treated and untreated male groups $(32.4\%)$ (P<0.05). There were no significant differences in the percentage of the all edible portion (AP) between MT treated and untreated males, but females were lower than males. Females are smaller fish in size and the gonads are larger in proportion which were discarded along with the intestine this explains the observed difference. Total biomass of the two groups were 134.8kg and 104.5kg per $m^3$, respectively. The proportion of fish reaching a marketable size of over 800 g in body weight within 14 months were $78\%$ in the MT treated group and $41\%$ in the untreated group.

• Journal of Environmental Impact Assessment
• /
• v.16 no.5
• /
• pp.327-340
• /
• 2007

The $PM_{10}$ and $PM_{2.5}$ aerosols were collected at Busan from March to May, 2005, and the concentrations of some metallic elements were analysed to study their characteristics. The mean concentration of $PM_{10}$ was $66.5{\pm}23.0{\mu}g/m^3$ with a range of 22.2 to $118.1{\mu}g/m^3$. The mean concentration of $PM_{2.5}$ was $46.1{\pm}17.2{\mu}g/m^3$ with a range of 9.7 to $83.3{\mu}g/m^3$. The ratio of $PM_{2.5}/PM_{10}$ was 0.69 at Busan. The distribution of metallic elements for $PM_{10}$ and $PM_{2.5}$ were Cd${\ldots}$ ${\ldots}$ $PM_{10}$ were $94.9{\mu}g/m^3$ and $63.7{\mu}g/m^3$, respectively. And The mean mass concentrations of Asian dust and non Asian dust in $PM_{2.5}$ were $56.9{\mu}g/m^3$ and $45.1{\mu}g/m^3$, respectively. The mean values of crustal enrichment factors for five elements (Cd, Cu, Pb, V and Zn) were all higher than 10, possibly suggesting the influence of anthropogenic sources. The soil contribution ratios for $PM_{10}$ and $PM_{2.5}$ were 20.5% and 19.4, respectively.

• Journal of Preventive Medicine and Public Health
• /
• v.21 no.1 s.23
• /
• pp.121-131
• /
• 1988

This study was performed to investigate the heavy metal contents of freshwater fishes. The samples of 24 species were collected at 7 areas located on the Mankyung River during September in 1987. And then the contents of lead, cadmium, copper and zine were analyzed by atomic absorption spectrophotometer. The results were summarized as follows ; 1. The mean value of lead, cadmium, and copper contents of fishes collected in the downstream were significantly higher than those of upstream. 2. The mean lead content of C. auratus was the highest $1.50{\pm}0.98{\mu}g/g$ in viscera and statistically significant difference from muscle content. 3. The mean cadmium content of C. auratus was the highest $0.087{\pm}0.054{\mu}g/g$ in viscera and significantly higher than that of muscle. 4. In the copper contents, the viscera of C. auratus was the highest $5.25{\pm}0.94{\mu}g/g$ and significantly higher than that of muscle, skeleton and gill. 5. The mean value of zinc content of C. auratus was shown the order of gill, skeleton, viscera and muscle.

• Biomolecules & Therapeutics
• /
• v.6 no.4
• /
• pp.400-405
• /
• 1998

The pharmacokinetics of CJ-50001 (recombinant human granulocyte-colony stimulating factor, developed by R&D center of Cheil Jedang Corp.) were investigated in rats and dogs. The serum concentrations of CJ-50001 were measured by a sandwich enzyme immunoassay. After single intravenous (iv) administration of Cf-50001 to rats at a dose of 5 $\mu$g/kg, the mean terminal half-life and area under the concentration-time curve (AUC) were 0.96 h and 124.497g . h/ml, respectively. After single subcutaneous (sc) administration at the same dose, maximum serum concentration was observed at about 2 hours after administration, and the mean terminal half-life, AUC and the bioavailability were 1.11 h,63.58$\mu$g . h/ml and 51.07%, respectively. In repeated dosing studies, CJ-50001 was administered iv and sc to rats at a daily dose of 5$\mu$g/kg for 7 days. The pharmacokinetic parameters, such as mean AUC and terminal half-life, were no significantly different from those of single administration. Following single iv and sc administration of CJ-50001 to dogs at a dose of 5 $\mu$g/kg, mean AUCs were much higher than those of rats, due to the decreased clearence (CL). After sc administration to dogs, maximum serum concentration was observed at 2~4 hours after administration and the bioavailability was 54.60%.

• Journal of odor and indoor environment
• /
• v.17 no.4
• /
• pp.362-371
• /
• 2018

Indoor Volatile organic compounds (VOCs) are classified as known or possible toxicants and odorants. This study characterized VOC levels in 11 homes in an area in the capital of Seoul by using two different methods of VOCs sampling, which are the active sampling using a thermal sorption tube and the passive sampling using a diffusion sampler. When using the active sampling method, the total target VOC concentration ranged from 41.7 to $420.7{\mu}g/m^3$ (mean $230.4{\mu}g/m^3$ ; median $221.8{\mu}g/m^3$) during winter and 21.3 to $1,431.9{\mu}g/m^3$ (mean $340.1{\mu}g/m^3$; median $175.4{\mu}g/m^3$) during summer. When using the passive method, 29.6 to $257.5{\mu}g/m^3$ (mean $81.8{\mu}g/m^3$; median $49.4{\mu}g/m^3$) during winter and 1.2 to $5,131.1{\mu}g/m^3$ (mean $1,758.8{\mu}g/m^3$; median $1,375.1{\mu}g/m^3$) during summer. Forty-nine VOCs were quantified and toluene showed the highest concentration regardless of the season and the sampling method studied. The distribution of VOCs was relatively varied by using the active method. However, it showed a low correlation with indoor environmental factors such as room temperature, humidity and ventilation time. The correlation between indoor environmental factors and VOCs were relatively high in the passive method. In particular, these characteristics were confirmed by principal component analysis.

• Journal of Environmental Science International
• /
• v.12 no.7
• /
• pp.735-744
• /
• 2003

The field observations on a seasonal characteristic of organic matter and its origin in the surface sediment were carried out at 35 stations in Deukryang bay, southern coast of Korean Peninsula from May 1995 to February 1996. The analytical parameters were mud temperature, ignition loss(IL), chemical oxygen demand(COD), pheopigment, sulfide and water content. The origin and seasonal dynamics of organic matter in Deukryang Bay were analyzed by COD/IL, COD/sulfide ratio and principal component analysis(PCA). As a results of the mud temperature fluctuated between 2.1$^{\circ}C$ with the lowest mean 4.6$^{\circ}C$ in winter and 27.6$^{\circ}C$ with the highest mean 25.5$^{\circ}C$ in summer. The range of ignition loss(IL) was from 3.1% in autumn to 21.5% in winter. Chemical oxygen demand(COD) showed the highest mean value of 8.45 mg/g dry in spring within the range of 2.90∼18.21 mg/g dry, while it showed the lowest value of 4.33 mg/g dry in autumn within the range of 0.67∼10.37 mg/g dry. Pheopigments showed the highest mean value of 9.04 $\mu\textrm{g}$/g dry in autumn within the range of 1.36∼20.44 $\mu\textrm{g}$/g dry, while it did the lowest mean value of 2.20 $\mu\textrm{g}$/g dry in summer within the range of 0.33∼11.36 $\mu\textrm{g}$/g dry. The range of total sulfide (H$_2$S) was from no detect(ND) to 3.30 mg/g dry in spring. And water content showed the annual mean value of 43.6% within the range of 23.6∼54.9%. The source of organic matter by COD/IL and COD/sulfide ratio in Deukryang Bay had been producted by primary producer in sea water areas except the areas effected by small stream, domestic and animal wastes. And the analytical results of PCA was able to be divided into three different regions. The former was characterized by the shallow depth and authigenic organic matter from phytoplankton in northwest area and northeastern inner bay, the secondary was done by deeper depth and allochthonous one from lands in southeast area and eastern entrance of bay, and the latter was done by authigenic one from the farm of seaweeds such as, sea cabbage, sea mustard etc in western entrance of bay. But a study on the relationship between sulfide and COD concentration in the northeastern inner bay which was characterized by the water stagnation will to take much more studying including major constituents of organic matter in the future.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.3
• /
• pp.193-208
• /
• 2021

The characteristics of the microcrack lengths(①), microcrack spacings(②) and Brazilian tensile strengths(③) related to the six directions of rock cleavages(H2~R1) in Geochang granite were analyzed. First, the 18 cumulative graphs for the above three major factors representing unique characteristics of the rock cleavages were made. Through the general chart for these graphs classified into three planes and three rock cleavages, the 28 parameters on the length, spacing and Brazilian tensile strength have been determined. The results of correlation analysis among these parameters are summarized as follows. Second, the above parameters were classified into six groups(I~VI) according to the sorting order on the magnitude of parameter values among three rock cleavages and three planes. The values of parameters belonging to group I and II are in order of R(rift) < G(grain) < H(hardway) and H < G < R. The values of the 8 parameters on the length of line(os₂, 𝚫s, 𝚫L and oS^mean), the exponent(λ_L^mean and λ_S^mean), the slope(a^mean) and the anisotropy coefficient (An^mean) are in order of R < G < H and H'(hardway plane) < G'(grain plane) < R'(rift plane). Third, the noticeable differences in distribution patterns among the six types of charts for three planes and three rock cleavages are as follows. From the chart for three planes, the values of 𝚫L, 𝚫s and 𝚫σ_t, corresponding to the distance between two points where the two fitting lines meet on the X-axis, increase in the order of R' < H' < G'. In particular, the two graphs of R2 and G2 related to the length and Brazilian tensile strength are almost parallel to each other and show the distribution characteristics of hardway plane. Among the graphs related to the Brazilian tensile strength, the overall shape for hardway plane is similar to that for grain. From the chart for three rock cleavages, the slopes of the graphs related to the length increase in the order of R < G < H, while those of the graphs related to the spacing and Brazilian tensile strength decrease in the order of R < G < H. Lastly, the characteristics of variation among the six rock cleavages, the three planes and the three rock cleavages were visualized through the correlation chart among the above parameters from this study.