• Journal of Life Science
• /
• v.24 no.6
• /
• pp.595-602
• /
• 2014

Styela Clava tunic (SCT) has found some applications in many areas of medical treatment including as an anti-inflammatory compound, a wound healing film, in guided bone regeneration, and as a food additive. The protective effect of SCT aqueous extract (AE-SCT) on cell death induced by $H_2O_2$ treatment was investigated by measuring the changes in cell viability in HepG2 cells after AE-SCT treatment. High concentrations of antioxidant compounds including flavonoids (3.3 mg/g) and phenolics (32.3 mg/g) were detected in AE-SCT but no significant cytotoxicity was observed in HepG2 cells treated with AE-SCT. The viability of HepG2 cells was also not changed by treatment with different concentrations of AE-SCT after $H_2O_2$ treatment. However, cell viability was significantly increased in cells treated with three different concentrations of AE-SCT before $H_2O_2$ treatment. The greatest increase in cell viability was observed in the group treated with $50{\mu}g/ml$ AE-SCT, when compared with vehicle-treated group. FACS and DAPI staining analysis indicated that the decrease in number of dead cells was dependent on the concentration of AE-SCT. Alterations in the Bax/Bcl-2 ratio after $H_2O_2$ treatment were significantly restored by treatment with different concentrations of AE-SCT. These results indicate that AE-SCT, which contains high levels of antioxidants, may protect cells against death induced by $H_2O_2$ treatment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.4
• /
• pp.237-242
• /
• 2008

The tunic of Styela clava(SCT) consists of a proteoglycan network. Regenerated cellulose films were prepared by solution casting and coagulation of SCT in N-methylmorpholine-N-oxide(NMMO)/$H_2O$(87/13 wt%). The crystalline structure of powdered SCT was primarily that of cellulose I. The crystalline structure of SCT films exhibited a cellulose II structure, similar to that of viscose rayon. Physical characterization of SCT films and fibers revealed an intrinsic viscosity($\eta$) of 6.35 dL/g, average molecular weight($M_w$) of 423,000 g/M, and fiber density of 1.50 $g/cm^3$ with a moisture regain and water absorption of 10.20% and 365%, respectively. The results were similar to those of cellulose films regenerated from wood pulp. Films prepared with 6 wt% SCT exhibited strong tensile strength, high water absorption, and a greater degree of elongation. Scanning electron micrographs(SEM) of film cross-sections showed a layered, sponge-like structure.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1501-1503
• /
• 1999

The $(Sr_{0.85}Ca_{0.15})TiO_3$(SCT) thin films are deposited on Pt-coated electrode$(Pt/TiO_2/SiO_2/Si)$ using RF sputtering method. Ag, Cu, Al, Pt films for the formation of top eletrode were doposited on SCT thin films by thermal evaporator and sputtering. The effects of top electodes have be studied on SCT samples with a variety of top electrode materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.718-721
• /
• 2004

The $(Sr_{0.9}Ca_{0.1})TiO_3$(SCT) thin films are deposited on Pt-coated electrode$(Pt/TiN/SiO_2/Si)$ using RF sputtering method at various substrate temperature. The optimum conditions of RF power and $Ar/O_2$ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin films was about $18.75[{\AA}/min]$. The crystallinity of SCT thin films were increased with increase of substrate temperature in the temperature range of $100\sim500[^{\circ}C]$. The dielectric constant of SCT thin films were increased with the increase of substrate temperature, and changed almost linearly in temperature ranges of $-80\sim+190[^{\circ}C]$. The current-voltage characteristics of SCT thin films showed the increasing leakage current as the substrate temperature increases.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.566-569
• /
• 2002

The $(Sr_{0.9}Ca_{0.1})TiO_3$(SCT) thin films are deposited on Pt-coated electrode (Pt/TiN/$SiO_2$/Si) using RF sputtering method. The maximum dielectric constant of SCT thin film is obtained by annealing at $600[^{\circ}C]$. The temperature properties of the dielectric loss have a value within 0.02 in temperature ranges of $-80{\sim}+90[^{\circ}C]$. The capacitance characteristics had a stable value within ${\pm}4[%]$. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films is observed above 200[kHz].

• The Journal of Korean Obstetrics and Gynecology
• /
• v.19 no.1
• /
• pp.81-96
• /
• 2006

Purpose : this study is to examine what are the effects of the Sintongchukeatang(SCT) on the ovariectomized rat model of postmenopausal osteoporosis. Methods : 12weeks Female Sprague-Dawley 30 rats of weighting 250-300g, were divided into three groups including the sham operation groups(10heads) and overiectomy groups(10heads). then we observed changes in the body weight serum metabolic products and femoral trabecular bone. Results : 1. The level of serum ALP activity in control group showed significant increase in comparison with sham, but that in SCT-treated was significantly decreased in comparison with control. 2. The level of serum GOT in control group showed no change in comparison with sham, but that in SCT-treated was significantly decreased in comparison with control. The level of serum GPT did not significant change among the three groups. 3. The level of serum estrogen in control group showed slightly decreased in comparison with sham, but that in SCT-treated showed no change in comparison with control. 4. Trabecular bone area as well as trabecular thickness in control group showed significant decrease in comparison with sham. Those in SCT-treated showed significant increase in comparison with control. 5. Trabecular separation only in SCT-treated showed significant decrease in comparison with control. 6. Osteoclast number and oseoblast surface in control group showed significant increase in comparison with sham. Those in SCT-treated showed significant decrease in comparison with control. Conclusion : SCT has shown to be capable of preventing and curing osteoporosis caused by old-aged and postmenopause.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.88-91
• /
• 2000

The $(Sr_{0.85}Ca_{0.15})TiO_3$(SCT) thin films are deposited on Pt-coated electrode(Pt/TiN/$SiO_2$/Si) using RF sputtering method. The crystallinity of SCT thin films is increased with increase of substrate temperature in the temperature range of 200~500$[^{\circ}C]$. V-I characteristics of SCT thin films show the increasing leakage current with the increases of deposition temperature. The conduction mechanism of the SCT thin films observed in the temperature range of 25~100$[^{\circ}C]$ can be divided into four characteristic regions with different mechanism by the increasing current.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.6
• /
• pp.374-379
• /
• 2007

Two experiments were designed to examine short-term effects of human chorionic gonadotropin (hCG), and long-term effects of gonadotropin-releasing hormone agonist (GnRHa), $17{\alpha}-hydroxyprogesterone$ (17P), and $17{\alpha},20{\beta}-dihydroxy-4-pregnen-3-one\;(17,20{\beta}P)$, alone or in combination, on milt production of the starry flounder Platichthys stellatus. In the first experiment, fish were injected with either 200 IU hCG/kg body weight or the same volume of marine fish Ringer's solution (MFRS). In the second experiment, each fish was implanted with a blank cholesterol pellet (control), $200\;{\mu}g$ GnRHa, $500\;{\mu}g$ 17P, or $100\;{\mu}g\;17,20{\beta}P/kg$ body weight alone or in combination. In the first experiment, hCG injection resulted in an increase in the expressible milt volume and a decrease in the spermatocrit (Sct). After pellet implantation in the second experiment, the milt volume was increased in males treated with GnRHa, GnRHa+17P, or $GnRHa+17,20{\beta}P$. On day 7 after hormone pellet implantation, the milt volume began to increase, and on day 14, the milt volume in the $GnRHa+500\;{\mu}g$ 17P group was significantly higher than that in the control group. Compared with the control group, the hormone pellet-treated groups had a significant reduction in the mean Sct and sperm concentration (Sc) at day 7 after pellet implantation, while there were no differences in total sperm number. The results suggest that increases in milt volume are generally associated with decreases in Sct and SC, suggesting that the main mechanism for the increase in milt volume was milt hydration.

• Geomechanics and Engineering
• /
• v.16 no.5
• /
• pp.547-558
• /
• 2018

Studies of soil dynamic properties in Malaysia are still very limited. This study aims to investigate the dynamic properties of two selected tropical residual soils (i.e., Sandy Clay and Sandy Silt) and a sand mining trail (Silty Sand) in Peninsular Malaysia using 1g shaking table test. The use of 1g shaking table test for soil dynamic testing is often constrained to large strain level and small confining pressure only. Three new experimental setups, namely large laminar shear box test (LLSBT), small chamber test with positive air pressure (SCT), and small sample test with suction (SSTS) are attempted with the aims of these experimental setups are capable of evaluating the dynamic properties of soils covering a wider range of shear strain and confining pressure. The details of each experimental setup are described explicitly in this paper. Experimental results show that the combined use of the LLSBT and SCT is capable of rendering soil dynamic properties covering a strain range of 0.017%-1.48% under confining pressures of 5-100 kPa. The studied tropical residual soils in Malaysia behaved neither as pure sand nor clay, but show a relatively good agreement with the dynamic properties of residual soils in Singapore. Effects of confining pressure and plasticity index on the studied tropical residual soils are found to be insignificant in this particular study.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1496-1498
• /
• 2003

The $(Sr_{0.85}Ca_{0.15})TiO_3$(SCT) thin films were deposited on Pt-coated electrode (Pt/TiN/$SiO_2$/Si) using RF sputtering method according to the deposition condition. The optimum conditions of RF power and Ar/$O_2$ ratio were 140[W] and 80/20, respectively. Deposition rate of SCT thin films was about 18.75[${\AA}/min$] at the optimum condition. The capacitance characteristics had a stable value within ${\pm}4[%]$. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films were observed above 200[kHz].