• 기술사
• /
• 제14권3호
• /
• pp.9-21
• /
• 1981

The rationalization for Tunnel Drifting is based on the high productivity which is achievable due to Continuous work with a Jumbo Drill, resulting in a much higher efficiency them the Conventional method of blasting, mucking and supporting services. Large projects of over 4,000m Tunnel Drifting are condidated to justify the use of a Jumbo Drill with a combination of superior explosives, machinery and techniques. During a Tunnel Drifting test, Gulita, Nabit and slurry made by Nitro Nobel were employed with following results. 1, Conditions: a. Granite Rock with Two free face b. Burden (W), 2m c. Diameter of hole, 42mm d. Depth of hole 3.5m e. Hole pitch 0.6m f. Charged Explosive per hole Gelatin Dynamite 4 pieces (112.5${\times}$4ea)+Guuita 5 pieces(110g${\times}$5ea) g. Simal-taneous Detonation h. After the blasting resultant rock size was Less 40% of the 0.3m Lumps. 2. Calculation results W=q/Wn=100cm‥‥‥Burden in simultaneous blasting 0.865kg(7.7ea)/hole ‥‥‥Amount of charge but hole pitch is 1.5W-2W The estimated cost of using a Jumbo Drill for the Construction of a 3,000,000 bbL sub-surface oil storage would be as follows: This calculation is based on the Jumbo Drill advancing 3.6m per blasting cycle. Unit cost/bbL Excavation $3.13 The attached sheet shows ideal Drilling pattern with Burn Cut & Smooth blasting method. In conclusion, it is my opinion that this method will assure safety and save cost and improve our technical know-how.

• 생약학회지
• /
• 제49권1호
• /
• pp.65-69
• /
• 2018

Torilin is a major sesquiterpene of Torilis japonica (Umbelliferae) fruits and known to be a melanogenesis inhibitor. Extraction conditions are important factor for the efficient preparation to save cost and time in economic aspects. For this reason, this study was conducted to optimize the extraction condition for maximal yield of torilin. For optimization, extraction factors such as extraction solvent, extraction temperature and sample/solvent ratio were tested and optimized for maximum yield of torilin using response surface methodology with Box-Behnken design (BBD). The optimal condition was obtained as a EtOAc concentration in MeOH of 31.8%, an extraction temperature at $30.3^{\circ}C$ and a sample/solvent ratio, 1000 mg/2 ml. The torilin yield under optimal conditions was found to be 9.9 mg/g dried samples, which were well-matched with the predicted value of 10.4 mg/g dried samples. These results will provide useful information about optimized extraction conditions for the development of torilin as cosmetic therapeutics to reduce skin hyperpigmentation.

• KSBB Journal
• /
• 제11권6호
• /
• pp.704-711
• /
• 1996

경제성분석 기능을 가진 생물공정 flowsheeting 소프트웨어인 BioPro Designer를 이용하여 외부단 백질 생산 시스템의 최적 공정설계가 수행되었다. BioPro Designer를 이용하여 Salmonella phage P P22의 tailspike protein의 생산시스템에 적용되었 는데 최적공정을 선택하는 과정에서 투입되는 시간 과 노력에 획기척인 개선이 있었다. 숙주의 내부에 서 생산되는 외부 단백질의 folding 특성이 가장좋 은 생산시스템을 선택하는데 영향을 미 친다는 것을 보여주기위하여 wild type의 tailspike와 두개의 다른 변종 tailspike들, 즉 tsf G244→R과 Su A334 -V을 비교 검토되었다. 회수된 tailspike 단백질의 단위질량 대비 자본투자비를 비교 척도로 하여 최척 의 tailspike 생산 시스템이 선택되었다.

• Steel and Composite Structures
• /
• 제42권3호
• /
• pp.375-388
• /
• 2022

In this work, limit elastic speed analysis of functionally graded porous rotating disks has been reported. The work proposes an effective approach for modeling the mechanical properties of a porous functionally graded rotating disk. Four different types of porosity models namely: uniform, symmetric, inner maximum, and outer maximum distribution are considered. The approach used is the variational principle, and the solution has been achieved using Galerkin's error minimization theory. The study aims to investigate the effect of grading indices, aspect ratio, porosity volume fraction, and porosity types on limit angular speed for uniform and variable disk geometries of constant mass. To validate the current study, finite element analysis has been used, and there is good agreement between the two methods. The study yielded a decrease in limit speed as grading indices and aspect ratio increase. The porosity volume fraction is found to be more significant than the aspect ratio effect. The research demonstrates a range of operable speeds for porous and non-porous disk profiles that can be used in industries as design data. The results show a significant increase in limit speed for an exponential disk when compared to other disk profiles, and thus, the study demonstrates a range of FG-based structures for applications in industries that will not only save material (lightweight structures) but also improve overall performance.

• 생약학회지
• /
• 제53권4호
• /
• pp.202-206
• /
• 2022

Salidroside is a major phenolic glycoside of Acer tegmentosum (Aceraceae) and known to be a hepatoprotective compound. Extraction conditions are one of the most important factors to save time and cost from an economic point of view. For this reason, this study was conducted to optimize the extraction condition for maximum yield of salidroside. For optimization, three extraction factors such as ethanol concentration (%), extraction temperature (℃), and solvent to material ratio (mg/mL) were tested and optimized for maximum yield of salidroside using response surface methodology (RSM). The optimal condition was obtained as an ethanol concentration of 53.4%, an extraction temperature at 67.11℃ and a solvent to material ratio (mg/mL), 195.55 mg/ml. The salidroside yield under optimal conditions was found to be 1.59 mg/g dried samples, which were well-matched with the predicted value of 1.56 mg/g dried samples. These results will provide useful information about optimized extraction conditions for the development of salidroside as hepatoprotective therapeutics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.247-249
• /
• 2006

As the on-board electric devices determine the performances of vehicles, production of reliable devices is important. To keep the reliability of devices constant, management of performance evaluation of the on-board devices is crucial. Because temperature bas a serious effect on failures of the components of the devices, its measurement is the first step for good management. In this study, we described performance characteristics of domestic auxiliary block developed through G7 project. We measured the performances of auxiliary block during test running by the developed on-line measurement system. After we save the input real-time data from each signal of Korean High Speed Train through the network line, we can acquire necessary information through Post-Processing program. We verify the auxiliary converter characteristics of Korean High Speed Train by this system.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 2004년도 추계 학술대회 및 정기총회
• /
• pp.48-49
• /
• 2004

A peroxidase[E.C.1.11.1.7] is very important enzymes,e.g., as preventive antioxidants. The function is connected with growth and specialization of plant. It makes from the peroxidase and other product to save itself When a plant have been under stress of environment. A class III peroxidase cDNA was isolated from the flower bud of Panax ginseng C.A. Meyer and named PgPrx3. The PgPrx3 is an ORF(open reading frame) of 1,065 bp and a amino acid of 355 residue. Used BioEdit software to compare the PgPrx3 amino acid sequence with other plants which have already known a result of Identity was Spinacia oleracea(70%), vigna angularis(71%), Nicotiana tabacum(69%) and Linum usitatissimym(65%). The peroxidase of Vigna angularis has high homology relationship with ginseng. for that reason, the PgPx3 is a member of class III peroxidase.

• 소성∙가공
• /
• 제23권1호
• /
• pp.5-9
• /
• 2014

Although much research has been conducted to reduce the thickness of PET bottles in order to save manufacturing costs, the challenge remains of guaranteeing mechanical strength for top-loaded thin PET bottles. The current study investigates the large deformation characteristics of a circle shaped PET bottle and a square shaped PET bottle when compressively loaded using FEA. The arc length method is used in the nonlinear FEA to understand the buckling phenomenon. For PET bottles with the same capacity, the circle shaped bottle shows more resistance to buckling and compression loading than the square shaped bottle.

• ETRI Journal
• /
• 제38권3호
• /
• pp.463-468
• /
• 2016

With the constant increase in network traffic, wireless operators are finding it more challenging to keep network hardware costs to a minimum. At the same time, the energy cost associated with operating a network has increased proportionally. Therefore, the search for higher network capacity is simultaneously accompanied by the search for a cost-efficient network deployment. In this paper, we show that a saving in transmitted signal energy can be achieved at the signal design level by deploying very specific signal processing techniques. Using an orthogonal frequency-division multiplexing signal for Long-Term Evolution networks as an example, we utilize a novel non-uniform companding quantizer to save a transmitted signal energy. Our results show that by using non-uniform quantization it is possible to further optimize 4G wireless networks.

• 대한임베디드공학회논문지
• /
• 제8권4호
• /
• pp.227-233
• /
• 2013

In this paper, we propose an implementation of pH reader on Android smart phone by using Eclipse and SDK. After taking a picture of pH spectrum and tested litmus paper at the same time, we save the picture. From the picture, reference values in RGB and YUB of all pH color in the spectrum are obtained and then those of a chosen point by user in the litmus paper are to be compared with. The distances between the reference colors and the litmus paper's color are measured by Euclidean distance in RGB or YUB coordinate. The nearest two pH values are taken to find the weighted average of the result. Series of test show the proposed scheme is feasible and has performance within 10% error.