• Korean Journal of Ecology and Environment
• /
• v.45 no.1
• /
• pp.82-92
• /
• 2012

In this study, we identified spatial and temporal patterns of reservoir trophic state within Keum-river watershed and analyzed correlations between chlorophyll-$a$ (Chl-$a$) and water quality parameters including conductivity and total phosphorus (TP). The reservoirs were separated into three trophic categories by the criteria of TP: 2 oligotrophic (9.3~9.4 ${\mu}g\;L^{-1}$), 15 mesotrophic (10.3~19.2 ${\mu}g\;L^{-1}$), and 14 eutrophic reservoirs (38.9~117.1 ${\mu}g\;L^{-1}$). Water quality parameters such as conductivity, TP, and Chl-$a$ reflected rainfall patterns, and the patters of annual mean TP were similar to the variation of annual mean Chl-$a$. Empirical models of Chl-$a$ against TP in reservoirs showed that statistical significance ($p$ <0.05) occurred in only some seasons and the trophic relations were modified by a washing-out effect or high non-algal light attenuation.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.53-57
• /
• 2003

R, G, Y, B color lenses Manufactured increasing tinted time by 5 min term. CIE $L^*a^*b^*$ coordination's analysis used spectrophotometer and CIE $L^*a^*b^*$ color system. CIE $L^*a^*b^*$ coordination transfer form about tinted time being $$b^*(Y-B)={\beta}a^*+{\alpha}$$ change to do linear almost. In red case, move in $G{\rightarrow}R$, $B{\rightarrow}Y$ form tinted time increases, and Parameter ${\alpha}$, ${\beta}$ value got each -3.49 and 0.90. In green case, CIE $L^*a^*b^*$ coordination transfer form is $R{\rightarrow}G$, $B{\rightarrow}Y$ form. Got the pure green color color in 10 min's tinted time. Parameter ${\alpha}$, ${\beta}$ value got each -0.72 and -0.55. Get into pure yellow and blue color case tinted time increases. Parameter ${\alpha}$, ${\beta}$ value are 14.11 and 1.58 in yellow, and Parameter ${\alpha}$, ${\beta}$ value are -11.62 and 1.30 in blue color.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.6
• /
• pp.1181-1187
• /
• 2009

In this paper, we proposed a method to analyze kind of clouds using a fuzzy reasoning method. In the proposed method, we used the clues that G channel value is dominant from RGB color values in land areas and B channel value is dominant in the sea areas discovered by the analyses of both visible images and infrared images. By these information, R and B channel values are applied to land areas and R and G channel values are applied to the sea areas. Noise areas(areas except cloud areas) are removed from a visible image and an infrared image by a threshold value, and then land areas and the sea areas are discriminated from the noise removed image. Cloud areas are extracted from discriminated areas using R, G, B channel values and a fuzzy reasoning method, and finally kind of clouds is decided by combining same cloud areas included in both the visible image and the infrared image. In comparison with a conventional quantization method, we verified that the performance of cloud analysis by the proposed method is more efficient through experiments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.12
• /
• pp.1370-1382
• /
• 2007

In this paper, the spiral planar monopole antenna mounted on a Cellular/WCDMA handset is designed. Frequency characteristics is optimized with various design parameters. The two spiral lines are adopted in order to implement Cellular frequency bandwidth and WCDMA frequency bandwidth. The bandwidth of the realized antenna is $0.805{\sim}0.892$ GHz(10 %) and $1.867{\sim}2.302$ GHz(21 %) for VSWR${\leq}2$ which contain the proposed frequency bandwidth. In human head, the simulated value on 1 g and 10 g averaged SAR caused by electromagnetic wave radiated in the designed antenna is compared with the measured value. As a result, the measured values of 1 g and 10 g averaged SAR were similar to the simulated values, which were lower than the SAR guidelines.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.2
• /
• pp.99-114
• /
• 2020

The characteristics of the Brazilian tensile strengths(σ_t) parallel to the rock cleavages in Jurassic granite from Geochang were analysed. The evaluation for the six directions of rock cleavages was performed using the parameter values on microcrack length and the above strength. The strength values of the five test specimens belonging to each direction were classified into five groups. The strength values of these five groups increase in order of group A < B < C < D < E. The close dependence between the above microcrack and strength was derived. The analysis results of this study are summarized as follows. First, the chart showing the variation and characteristics of strength among the three rock cleavages were made. In the above chart, the strength values of six directions belonging to each group were arranged in order of rift(R1 and R2), grain(G1 and G2) and hardway(H1 and H2). The strength distribution lines of the five groups concentrate in the direction of R1. And the widths among the above five lines indicating strength difference(Δσ_t) are the most narrowest in R1 direction. From the related chart, the variation characteristics among the two directions forming each rock cleavage were derived. G2(2)-test specimen shows higher value and lower value of the difference in strength compared to the case of G1(1)-test specimen. These kinds of phenomena are the same as the case between the test specimen H2(2) and H1(1). The strength characteristics of the above test specimens (2) suggest lower microcrack density value and higher degree of uniformity in the distribution of microcracks arrayed parallel to the loading direction compared to those of test specimens (1). The six strength values belonging to each group were arranged in increasing order in the above chart. The strength values of the test specimens belonging to both group D and E appear in order of R1 < R2 < G1 < H1 < G2 < H2. Therefore, the strength values of group D and E can be indicator values for evaluating the six directions of rock cleavages. Second, the correlation chart between slope angle(θ) and strength difference(Δσ_t) were made. The values of the above two parameters were obtained from the five strength distribution lines connecting between the two directions. From the chart related to rift plane(G1-H1, R'), grain plane(R1-H2, G') and hardway plane(R2-G2, H'), the slope values of linear functions increase in order of R'(0.391) < G'(0.470) < H'(0.485). Among three planes, the charts related to hardway plane show the highest distribution density among the five groups. From the related chart for rift(R1-R2, R), grain(G1-G2, G) and hardway(H1-H2, H), the slope values of linear functions increase in order of rift(0.407) < hardway(0.453) < grain(0.460). Among three rock cleavages, the charts related to rift show the highest frequency of groups belonging to the lower region. Taken together, the width of distribution of the slope angle among the three planes and three rock cleavages increase in order of H' < G < R' < R < G' < H. Third, the correlation analysis among the parameters related to microcrack length and the tensile strengths was performed. These parameters may include frequency(N), total length(Lt), mean length(Lm), median length(Lmed) and density(ρ). The correlation charts among individual parameters on the above microcrack(X) and corresponding five levels of tensile strengths for the five groups(Y) were made. From the five kinds of correlation charts, the values of correlation coefficients(R²) increase along with the five levels of strengths. The mean values of the five correlation coefficients from each chart increase in order of 0.22(N) < 0.34(Lt) < 0.38(ρ) < 0.57(Lmed) < 0.58(Lm). Fourth, the correlation chart among the corresponding maximum strength for group E(X) and the above five parameters(Y) were made. From the related chart, the values of correlation coefficient increase in order of 0.61(N) < 0.81(Lt) < 0.87(ρ) < 0.93(Lm) < 0.96(Lmed). The two parameters that have the highest correlations are median length with maximum strength. Through the above correlation analysis between microcrack and strength, the credibility for the results from this study can be enhanced.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.31-40
• /
• 2009

The rheologic properties of elastic impression materials is a very important role as taking high accuracy impression. But, the studies that are focused on the rheologic properties of Korean elastic impression materials are not sufficient. The purpose of this study is to help clinical high accuracy impression taking by testing rheologic properties of elastic impression material that is made by Korea and other countries. Six type III elastic impression materials are tested. Subjects are 2 Korean polyvinylsiloxane(PVS), 2 imported PVS, 1 polyether, and 1 polysulfide. HAAKE RheoStress $1^{(R)}$(Thermo Electron Co. Germany)is used in measuring. HAAKE RheoStress $1^{(R)}$ is plate to plate type rheometer. All subjects is tested 3 times and measuring time is 900 seconds. We measured G′ and loss tangent after mixing. All elastic impression materials had a sigmoid shape on increasing G′ by time and decreasing loss tangent after setting, maximum G' is appeared highest in polyether, and lowest in polysulfide. Initial loss tangent is highest in polyether, and is lowest in Koreans PVS. Significant difference is showed in initial loss tangent between Korean PVS and imported PVS.

• The Korean Journal of Pesticide Science
• /
• v.19 no.3
• /
• pp.272-278
• /
• 2015

Colletotrichum gloeosporioides is one of the most serious pathogens of persimmon in Korea. In 2013, 67 isolates of C. gloeosporioides were isolated from infected fruits, leaf and twigs of persimmon (Diosprosi kaki) at Sangju, Gyeongsangbukdo and fungal responses against five fungicides (prochloraz manganese complex, tebuconazole, mancozeb+myclobutanil, fluquinconazole+prochloraz, and tebuconazole+tolyfluanid) were evaluated by their growth on the fungicide-medium. All isolates were inhibited mycelium growth on the medium with each recommended application concentration of flied. $EC_{50}$ (${\mu}g/ml$) of tebuconazole was from 0.02 to 1.04 and average was 0.31. $EC_{50}$ (${\mu}g/ml$) of prochloraz manganese complex was 0.02~0.23 average was 0.078. Average $EC_{50}$ values (${\mu}g/ml$) of Fluquinconazole+Prochloraz (FP) was 0.029. On the basis $EC_{50}$ (${\mu}g/ml$), the correlation coefficient (r) between tebuconazole and prochloraz manganese complex, prochloraz manganese complex and FP, tebuconazole and FP were 0.42, 0.44 and 0.27, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.11
• /
• pp.8-16
• /
• 2000

In this paper, on calculating SARs on human head using computer simulation, SARs caused by PCS handsets are calculated and compared, and the design parameters that affect SAR values are analyzed. Is and 10 g peak averaged SARs are calculated as the type of antenna, the location of antenna, and the type of handset are changed and SAR distributions as depth of human head are shown. Among the antennas on flip type handsets, side mounted PIFA has the lowest SARs 1g and 10g peak averaged SARs are 0.686W/kg and 0.353W/kg. The SARs caused by monopole antenna on folder type handset are 1.133W/kg and 0.709W/kg. and are about 30% lower than monopole 1.759W/kg and 0.978W/kg, respectively. SAR distributions as depth of human head of side mounted PIFA and monopole antenna on folder-type handset are more slowly changed than those of top mounted PIFA and monopole antenna on flip-type handset.

• Journal of Nutrition and Health
• /
• v.24 no.5
• /
• pp.450-457
• /
• 1991

The iron status of 57 female college students was evaluated by measurements of hemoglobinCHb). hematocritCHct) and serum ferritin(Ferritin). Mean values for Hb, Hct and Ferritin were $13.9\pm$ 0.96g/dl, $41.4\pm$ 2.85% and $20.7\pm$ l5.5ng/mL respectively. Ferritin as well as Hb. Hct were not statistically different from normal distribution. although ferritin were skewed to the right. The prevalence of anemia defined by Hb < 12g/dI. Hct ~36 % and Ferritin <12ng/ml were found to be 5.3, 10.3 and 36.8%, respectively. By using Hb as a screening tool at a cutoff point of 12g/dI. 2.8% of healthy subjects will be incorrectly classified as anemic and 90.5 % of anemic as healthy. Sensitivity and specificity were calculated at various cutoff points of Hb and Hct. The estimates of sensitivity and specificity allow Hb 14.0g/dl as cutoff point for good predictor of anemia.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.521-527
• /
• 2001

The miscibility, molecular interaction and tensile properties of the blends of poly (${\varepsilon}$-caprolactone) (PCL) with poly(vinyl chloride) (PVC) have been studied. The measured glass transition temperature values of PCL/PVC blends were found to be well fitted by Fox equation. We found that PCL/PVC blends are amorphous up to 23% PCL content. The blends showed the highest Young's modulus and yield strength at 5% PCL content and the highest tensile strength at 11% PCL content. The blends with low contents of PCL(up to 13%) show increased tensile strength and decreased elongation of PCL/PVC blends. Consequently, the antiplasticization phenomenon is observed in the PCL/PVC blends.