• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.5
• /
• pp.22-33
• /
• 2011

An induction motor operated with a conventional direct self controller(DSC) shows a sluggish response during startup and under changes of torque command. Fuzzy logic controller(FLC) is used in conjection with DSC to minimize these problems. A FLC chooses the switching states based on a set of fuzzy variables. Flux position, error in flux magnitude and error in torque are used as fuzzy state variables. Fuzzy rules are determinated by observing the vector diagram of flux and currents. This paper proposes hybrid fuzzy controller for direct torque control(DTC) of induction motor drives. The speed controller is based on adaptive fuzzy learning controller(AFLC), which provide high dynamics performances both in transient and steady state response. Flux position, error in flux magnitude and error in torque are used as FLC state variables. The speed is estimated with model reference adaptive system(MRAS) based on artificial neural network(ANN) trained on-line by a back-propagation algorithm. This paper is controlled speed using hybrid fuzzy controller(HFC) and estimation of speed using ANN. The performance of the proposed induction motor drive with HFC controller and ANN is verified by analysis results at various operation conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.32-35
• /
• 1996

Traffic signal cycle optimization is one of the most efficient ways for reducing fuel consumption and improving vehicle waiting time of highsaturated traffic conditions. But most research focused on lowsaturated traffic conditions. Only a few studies have researched traffic control for highsaturated traffic conditions. In this paper reviews the problem of conventional traffic signal system and creates optimal traffic cycle of at the bottom traffic intersection using 27 fuzzy rules. Moreover, to prevent spillback, it can adapt control even though upper traffic intersection has a different saturation rate, road length, road slope and road width.

• Proceedings of the KIEE Conference
• /
• 1991.11a
• /
• pp.75-79
• /
• 1991

This paper presents a Fuzzy Control Technique to improve the load frequency control dynamics of a power system for a given load perturbation(step-function waveform). A related simulation results follow and show that the optimized rules by the proposed technique are effective for reduction of overshoot and deviation of load frequency in stedy-state, and for minimization of settling time.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.3
• /
• pp.179-181
• /
• 2006

In this paper, we present a method of fuzzy controller design for the power plant superheater in the form of bilinear system. For the steam temperature control, the input variables are constructed by the area of difference between the profiles estimated from bilinear observer and reference profiles, and the time rate of change. We estimate the control rules by T. Takagi and M. Sugeno's fuzzy model. The feasibilities of the suggested method are illustrated via the computer simulation result.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.4
• /
• pp.220-227
• /
• 2005

This paper presents hybrid artificial intelligent(HAI) controller based on the vector controlled IPMSM drive system. And it is based on artificial technologies that adaptive neural network fuzzy(A-NNF) is to speed control and artificial neural network(ANN) is to speed estimation. The salient feature of this technique is the HAI controller The hybrid action tolerates any inaccuracies in the fuzzy logic assignment rules or in the neural network stationary weights. Speed estimators using feedforward multilayer and artificial neural network(ANN) are compared. The back-propagation algorithm is easy to derived the estimated speed tracks precisely the actual motor speed. This paper presents the theoretical analysis as well as the simulation results to verify the effectiveness of the new hybrid intelligent control.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.2 s.40
• /
• pp.121-129
• /
• 2006

Rule-based Expert system using Fuzzy technique inferences various rules by user's input condition and the most proper control signal. This system can lose objectivity by input condition which depends on user's decision. This paper can solve those problems by adding case-based system's technique. The traffic signal control expert system is proposed to store the cases based on the statistics, days, seasons and various circumstances and use them.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.6
• /
• pp.79-88
• /
• 1997

New technologies, systems, and services in telecommunication have increased the need for an efficient and robust control mechanism to protect switching systems from overload. To achieve proper control, it is necessary to find a set of parameters that can describe the system. However, it is difficult to find types of data that can form a suitable basis for control. In this paper, we categorize the load status of a switching system into three classes (i.e., normal state, pre-overload state, and overload state) and formulate the overload detection as a classification problem. We find the relationships between the load classes and a set of monitored switching system parameters by applying a fuzzy rule-generation method. The rules are automatically generated from training data. Simulation results involving a switching system is given.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.7 no.3
• /
• pp.21-33
• /
• 1997

In this paper, a method of self-organizing for fuzzy logic controller(FLC) through learning of the proper direction of coritrol is proposed. In case of designing a self-organizing FLC for unknown dynamic plants based on the gradient descent method, it is difficult to identify the desirable direction of the change of control inpul. in which the error would be decreased. To resolve this problem, we propose a method as fo1lows:at first, assign representative values for the direction of change of error with respect to control input to each partitioned region of the states, and then, learn the fuzzy control rules using the reinforced representative values through iterative trials. 'The proposed self-organizing FLC has simple structure and it is easy to design. The validity of the proposed method is proved by the computer simulation for an inverted pendulum system.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.2
• /
• pp.183-194
• /
• 2005

In this study, we introduce an advanced architecture of genetically optimized Hybrid Fuzzy Neural Networks (gHFNN) and develop a comprehensive design methodology supporting their construction. A series of numeric experiments is included to illustrate the performance of the networks. The construction of gHFNN exploits fundamental technologies of Computational Intelligence (CI), namely fuzzy sets, neural networks, and genetic algorithms (GAs). The architecture of the gHFNNs results from a synergistic usage of the genetic optimization-driven hybrid system generated by combining Fuzzy Neural Networks (FNN) with Polynomial Neural Networks (PNN). In this tandem, a FNN supports the formation of the premise part of the rule-based structure of the gHFNN. The consequence part of the gHFNN is designed using PNNs. We distinguish between two types of the linear fuzzy inference rule-based FNN structures showing how this taxonomy depends upon the type of a fuzzy partition of input variables. As to the consequence part of the gHFNN, the development of the PNN dwells on two general optimization mechanisms: the structural optimization is realized via GAs whereas in case of the parametric optimization we proceed with a standard least square method-based learning. To evaluate the performance of the gHFNN, the models are experimented with a representative numerical example. A comparative analysis demonstrates that the proposed gHFNN come with higher accuracy as well as superb predictive capabilities when comparing with other neurofuzzy models.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.663-667
• /
• 2004

This paper presents new pruning and learning methods for the fuzzy rule-based classifier. The structure of the proposed classifier is framed from the fuzzy sets in the premise part of the rule and the Bayesian classifier in the consequent part. For the simplicity of the model structure, the unnecessary features for each fuzzy rule are eliminated through the iterative pruning algorithm. The quality of the feature is measured by the proposed correctness method, which is defined as the ratio of the fuzzy values for a set of the feature values on the decision region to one for all feature values. For the improvement of the classification performance, the parameters of the proposed classifier are finely adjusted by using the gradient descent method so that the misclassified feature vectors are correctly re-categorized. The cost function is determined as the squared-error between the classifier output for the correct class and the sum of the maximum output for the rest and a positive scalar. Then, the learning rules are derived from forming the gradient. Finally, the fuzzy rule-based classifier is tested on two data sets and is found to demonstrate an excellent performance.