• 동력기계공학회지
• /
• 제5권2호
• /
• pp.87-92
• /
• 2001

Automotive suspension system is a mechanism for isolation of the vibration coming from the road inputs. Recently, the electronically controlled suspension systems which may improve ride and handling performance have been developed. Here, the continuously controlled semi-active suspension system is focused. As a mechanism to control damping forces continuously, a solenoid valve is used. The modeling for the solenoid valve is introduced briefly, a vehicle dynamics modeling is constructed, and then combined system model is completed. To design the efficient control algorithm for the semiactive suspension system the knowledge based fuzzy logic is applied and the technique how to apply the sky-hook theory to the fuzzy logic is developed. Finally, to confirm the improvement of performance the computer simulation is carried out.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.349-349
• /
• 2000

A Clustering Adaptive Fuzzy Logic Controller(CAFLC) is applied to the torque control of a brushless do motor drive. Objective of this system includes elimination of torque ripple due to cogging at low speeds under loads. The CAFLC implemented has advantages of computational simplicity, and self-tuning characteristics. Simulation results showed that the torque ripple and dynamic response of the system using a CAFLC were superior to the model reference adaptive controlled system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.524-527
• /
• 2003

This paper proposes speed control system using a Fuzzy Logic Controller(FLC) in order to realize the speed control of Permanent Magnet AC Motor with no sensor. FLC based MRAS(Model Reference Adaptive System) estimates the speed of Permanent Magnet AC Motor. Using the estimated speed, speed control is performed. The experiment is executed to verify the propriety and the effectiveness of the proposed system.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.149-155
• /
• 2012

This paper presents mobile robot control architecture of hierarchical behaviors, inspired by biological life. The system is reactive, highly parallel, and does not rely on representation of the environment. The behaviors of the system are designed hierarchically from the bottom-up with priority given to primitive behaviors to ensure the survivability of the robot and provide robustness to failures in higher-level behaviors. Fuzzy logic is used to perform command fusion on each behavior's output. Simulations of the proposed methodology are shown and discussed. The simulation results indicate that complex tasks can be performed by a combination of a few simple behaviors and a set of fuzzy inference rules.

• 한국군사과학기술학회지
• /
• 제7권3호
• /
• pp.140-148
• /
• 2004

Fault detection and isolation(FDI) and reconfigurable flight control system provide better survivability even though actuator faults occur. In this study, a new fault detection and isolation algorithm is proposed using fuzzy logic. When the FDI system detects the actuator fault, the fuzzy logic investigates the state variables to find which actuator has fault. Proposed fuzzy detection algorithm detect not only a single fault but also multiple faults. After detecting the fault, the reconfigurable flight control system begins operating for compensating the effects of the fault. A numerical simulation using six degree-of-freedom nonlinear aircraft model is performed to verity the performance of the proposed fault detection and isolation scheme.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1051-1052
• /
• 2006

This paper deals with mathmatical of an induction motor, considering non-linearity in the torque balance equation under closed loop operation with a reference speed. A controller based on Adaptive Nuro-Fuzzy Inference System (ANFIS) is developed to minimize overshoot and settling time following sudden changes in load torque. The overall system is modeled and simulated using the Matlab/simulink and Fuzzy Logic Toolbox. The advantages of fuzzy logic and neural network based fuzzy logic controller. Required training data the ANFIS controller is generated by simulation of the anti-windup PI controller is eliminated using the ANFIS controller. The transient deviation of the response from the set reference following variation in load torque is found to be negligibly samll along with a desirable reduction in settling time for the ANFIS controller.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.163-173
• /
• 2010

In multi-mobile robot environment, path planning and collision avoidance are important issue to perform a given task collaboratively and cooperatively. The proposed approach is based on a potential field method and fuzzy logic system. For a global path planner, potential field method is employed to select proper path of a corresponding robot and fuzzy logic system is utilized to avoid collisions with static or dynamic obstacles around the robot. This process is continued until the corresponding target of each robot is reached. To test this method, several simulation-based experimental results are given. The results show that the path planning and collision avoidance strategies are effective and useful for multi-mobile robot systems.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.399-402
• /
• 2005

본 논문에서는 이동로봇의 슬립을 고려하여 슬립 발생 시 이동 로봇의 위치를 퍼지논리 시스템을 이용하여 보정하는 방식을 제안한다. 퍼지 논리 시스템의 뛰어난 추론능력으로 슬립을 추론 할 수 있을 것이다. 제안된 방식의 유용성을 확인하기 위하여 differential 구동형 로봇의 슬립을 모델링 하고, 추정오차에 대하여 시뮬레이션한 결과 우수한 성능을 확인 하였다.

• 중소기업융합학회논문지
• /
• 제4권1호
• /
• pp.31-39
• /
• 2014

PID 오토 튜닝 컨트롤러는 퍼지 논리를 통해 설계되었다. 이러한 오류 및 오류 파생 의견으로 일반적인 값은 발견적 표현으로 변경, 그들은 퍼지 및 defuzzification 과정을 통해 PID 이득을 결정했다. 퍼지 절차 및 PID 제어기 설계는 개별적으로 간주하고, 그것들을 혼합하고, 분석 하였다. 퍼지 논리에 의해 획득 자동 조정 PID 컨트롤러는 3 차 플랜트 제어 이하의 능력을 보여 주었다. 또한 설계된 자동 동조 방식으로 추적 문제를 참조하는 데 적용한다.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1996년도 추계학술대회 학술발표 논문집
• /
• pp.243-248
• /
• 1996

In this paper, a general neural-network-based connectionist model, called Fuzzy Neural Network(FNN), is proposed for the realization of a fuzzy logic control system. The proposed FNN is a feedforward multi-layered network which integrates the basic elements and functions of a traditional fuzzy logic controller into a connectionist structure which has distributed learning abilities. Such FNN can be constructed from training examples by learning rule, and the connectionist structure can be trained to develop fuzzy logic rules and find optimal input/output membership functions. Computer simulation examples will be presented to illustrate the performance and applicability of the proposed FNN, and their associated learning algorithms.