• Journal of Korea Water Resources Association
• /
• v.47 no.8
• /
• pp.729-742
• /
• 2014

This study predicted long-term sediment distribution for 76 years by using RMA-2 which is two-dimensional numerical model and SED2D which is the sediment transport model to quantitatively analyze sediment distribution in the reservoir based on sediment intrusion and efficiently manage the reservoir. For water level-discharge-sediment data required in boundary conditions of the model, real-time data measured by the Korea Water Resources Corporation were used. The sediment input data was calculated using K-DRUM model. Sedimentation depth was compared with results of model by collecting cross-section core in the reservoir during the dry season. As the result of validation, the sediment depth in the reservoir was similar to actually measured value. For prediction of long-term sediment distribution, terrain data measured in 2012 was used as starting crosssection and simulations for 76 years until 2088 were made. As the results of simulations, sediment distributions of 1.63~1.26 m and 1.45~0.007 m were shown in upstream and downstream of Hapcheon Dam, respectively.

• Journal of the Korea Concrete Institute
• /
• v.18 no.3 s.93
• /
• pp.431-438
• /
• 2006

The determination of the depth of deteriorated concrete is one of the main problems in the structural assessment of concrete structures that have been subjected to a fire. This information is particularly important in order to optimize the future operations of repair/strengthening, or in decision-making concerning a possible demolition. The purpose of this study is to propose evaluation technique of damaged depth of concrete exposed at high temperature. In order to evaluate damaged depth of core picked at member under fire, the 24 specimens have been made with variables of concrete strength(20 MPa, 40 MPa, 60 MPa) and heating exposure condition in 600 and 800 for 2 hours. Color change analysis and water absorption after heating have been measured and split tensile stress test was performed to ka the residual compressive strength against the depth of specimen. The results show that the deeper of the depth from heating face, water absorption ratio is smaller and residual stress ratio is larger and the color of heated face is changed to red color. Using this technique at damage evaluation of fired structure, We evaluate damaged depth of member under fire and determine the reasonable strengthening range.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.2
• /
• pp.141-151
• /
• 2011

This paper suggests the Facility Management System for plant factory promising to be a core technology of the agriculture in the future. This system makes diagnoses that status from sensors or facilities in the factory for exact operation and monitors the internal environment with the control status in real-time. It is expected that we could operate a plant factory safely and effectively by using the system. The system consists of the data management module, the context provider module, the context interpreter module, the service provider module, the data storage and user interface. The system provide with the failure diagnosis service, the facility control service, and the high-reliability monitoring service via the interactions between above modules. The failure diagnosis service determines whether the sensors or facility devices are in failure or not, and informs the administrator of their conditions. The facility control service is activated in case if the facilities need to be managed during the diagnosis for failure or malfunction processes. The high-reliability monitoring service provides the administrator with verified data through the failure diagnosis service. Then we confirmed that the suggested system operates correctly through the system simulation.

• Ocean and Polar Research
• /
• v.37 no.2
• /
• pp.127-140
• /
• 2015

A continuous series of 60 snow samples was collected at a 2.5-cm interval from a 1.5-m snow pit at a site on the Styx Glacier Plateau in Victoria Land, Antarctica, during the 2011/2012 austral summer season. Various chemical components (${\delta}D$, ${\delta}^{18}O$, $Na^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, $SO_4{^2-}$, $NO_3{^-}$, $F^-$, $CH_3SO_3{^-}$, $CH_3CO_2{^-}$ and $HCO_2{^-}$) were determined to understand the highly resolved seasonal variations of these species in the coastal atmosphere near the Antarctic Jang Bogo station. Based on vertical profiles of ${\delta}^{18}O$, $NO_3{^-}$and MSA, which showed prominent seasonal changes in concentrations, the snow samples were dated to cover the time period from 2009 austral winter to 2012 austral summer with a mean accumulation rate of $226kgH_2Om^{-2}yr^{-1}$. Our snow profiles show pronounced seasonal variations for all the measured chemical species with a different pattern between different species. The distinctive feature of the occurrence patterns of the seasonal variations is clearly linked to changes in the relative strength of contributions from various natural sources (sea salt spray, volcanoes, crust-derived dust, and marine biogenic activities) during different short-term periods. The results allow us to understand the transport pathways and input mechanisms for each species and provide valuable information that will be useful for investigating long-term (decades to century scale periods) climate and environmental changes that can be deduced from an ice core to be retrieved from the Styx Glacier Plateau in the near future.

• International Commerce and Information Review
• /
• v.15 no.4
• /
• pp.341-366
• /
• 2013

The term, Mittelstand, has no exact english translation for the definition, but, today, Mittelstand refers to small and medium-sized enterprises(SME), mostly family-owned firms in Germany. The Mittelstand is called the backbone of the German economy because it drove the economic miracle after World War II. During the global recession and the euro zone's debt crisis in recent years, in which european businesses have faced the near-collapse of competitiveness particularly in manufacturing, the German exports are booming and exceeded exports of China in 2012. Most importantly, the Germany economic performance has been widely attributed to the strength of the Mittelstand. Many of countries, even some leading public companies are seeking to emulate the success of the Mittelstand. Investors evaluate that many of Germany's investable "hidden champions" are Mittelstand companies. The purpose of this study is to present some of answers to the following questions: Firstly, what makes the German Mittelstand so successful? Secondly, what does the success of the German Mittelstand mean for the Korean SMEs in global competitiveness? Thirdly, what Korean government has to do improve the global competitiveness of the Korean SMEs? Some discussions in this study mention the managerial implications for Korean exporting SMEs particularly in manufacturing. Several factors that account for the success of the German Mittelstand are technological excellence and the tradition of family-owned management, concentration on niche market and globalization, and institutional supports. There are some of important lessons to be learned from the German Mittelstand. If the purposes of Korean SMEs want to remain in the sustainable competitive advantage and withstand unforeseen economic turbulences in the future, they must be able to meet the followings: 1) Technology that meets the global standard or exceeding it 2) Competitiveness in price in the global market 3) Active involvement in the globalization process, utilizing various entry modes Innovative products at globally competitive price are a crucial point for Korean exporting SMEs to achieve their competitive edge over others in the target markets abroad. It is time for Korean SMEs to cultivate a core competence in manufacturing in order to position Korea as a global manufacturing hub with SMEs leading.

• Korean Journal of Agricultural Science
• /
• v.39 no.4
• /
• pp.459-466
• /
• 2012

The objective of this study is to observe growth pattern of grand rapids(lettuce) according to different dexperimental conditions for minimizing its growth period such as composition of nutrient, irradiation time of light source and cultivation mode. The culture of water spray type using seeds of grand rapids was performed during growth period of total 50 days. Experimental conditions consist of five compositions of nutrient (PW 0.5 mS/cm, PW 1.0 mS/cm, PY 0.5 mS/cm, PY 1.0 mS/cm, PW 2.0 mS/cm) and three irradiation times of light source (12h(on) / 12h(off), 18h(on) / 06h(off), 24h(on) / 00h(off)). Illumination was adjusted to ratio of 7:1:1 of red, blue and white color, respectively. Indoor environmental condition for cultivating grand rapids is as follows: temperature (19-$22^{\circ}C$), relative humidity (60-70%) and carbon dioxide (1,000-1,200 ppm). The data were obtained from five iteration tests. The maximum growth level was observed in the experimental condition of 18 hr(on) / 06 hr(off) and PY 1 mS/cm for 1st week of cultivation period, 24 hr(on) / 00 hr(off) and PY 1mS/cm for 2nd week of cultivation period, and 24 hr(on) / 00hr(off) and PW 1 mS/cm for 3rd week of cultivation period, respectively. On the contrary, the minimum growth level was observed in the experimental condition of 18 hr(on) / 06 hr(off) and PW 0.5 mS/cm for 1st week of cultivation period, 12 hr(on) / 12 hr(off) and PW 0.5 mS/cm for 2nd week of cultivation period, and 12 hr(on) / 12 hr(off) and PY 0.5 mS/cm for 3rd week of cultivation period, respectively. Based on the results obtained from this study, it is concluded that the growth level of grand rapids varied with different irradiation time of light source and composition ratio of nutrient according to cultivation period.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.6
• /
• pp.305-311
• /
• 2012

In order to recycle the coal bottom ashes (denoted as BA) produced from a thermal power plant, the artificial aggregates (denoted as AAs) containing BA and red clay were manufactured, and the physical properties of AAs were studied as a function of particle size of BA and batch compositions. As-received BA had 38 wt% coarse particles of above 2 mm and many unburned carbon mass and porous slag particles were co-existed. So the two particle sizes of BA, the fine (< 100 ${\mu}m$) and coarse (< 2 mm), were prepared by milling and screening process. The AAs containing fine BA sintered at $1100{\sim}1200^{\circ}C$ had the higher bulk density and lower water absorption compared to the specimen made of coarse BA. The inside core of AAs manufactured by using coarse BA showed nonuniform and porous microstructure, while the AAs made of fine BA had a uniform and dense microstructure. In this research, the AAs containing BA and red clay with various bulk density (1.2~1.7) and water absorption (13~21 %) could be manufactured by controlling the particle size of BA and batch compositions, so the AAs of various physical properties could be applied to the wide fields such as construction/building materials in near future.

• Science of Emotion and Sensibility
• /
• v.20 no.4
• /
• pp.89-100
• /
• 2017

Since smart devices are able to efficiently provide information without barriers of time and location, they are widely utilized with advent of the hyper-connected society. Especially, the smart devices have been developed in the form of wearable devices for mutual interaction between human and objects. Smart clothing, which embeds smart devices within clothes, measures and obtains a variety of bio-signals as it is in close contact with the human bodies. Conventional smart clothing generated wearers' discomfort because they were developed by simple attachment of electronic devices to clothes. Therefore, it is highly recommended to develop novel smart clothing based on smart textiles which integrate electronic devices as parts of textiles. As smart watches are currently the most available wearable devices in the market, smart watch users were selected in this study, for the purpose of investigating core needs of wearable smart device users based on the user experience and user's sensibility. Qualitative research was performed through semi-structured interview in order to obtain detailed answers about user sensibility based on smart watch user experience. After the in-depth interview, the user's sensibility was categorized into four aspects; functional, aesthetic, social, and empirical. Sensibility adjectives and key words were assigned to each aspect and their frequency was analyzed. It was the functional aspect of sensibility that the wearable device users require the most. The results of this study will be utilized as a fundamental data to develop the smart textiles required for the next generation of smart clothing which is attracting as a future wearable device.

• Cartoon and Animation Studies
• /
• s.25
• /
• pp.41-63
• /
• 2011

Many educational facilities have been formed due to the nation's revival policy in the animation industry since about 1995. Owed to the active financial support of the nation, the production industry rapidly vitalized, production technology rapidly advanced, and a large workforce is being passed on into society through educational institutions. The reality of many developing countries appearing to be putting emphasis on the industrialization of animation, similar to our country, is becoming a great pressure on us industrially. It is never easy to develop a certain field into a globally competitive industry in a short period of time. Our countermeasure, pursuant to these international circumstances, lies in innovation and creativity that has broken away from the existing methods of production, and mass production of high quality animation specialists. This paper is a new educational proposition for the consolidation of national competitiveness. Animating, the core of producing an animation, completely depends on the animator's artistic and technical ability. In order to supplement the existing methods of studying by theory and make up for the biggest weak point, which is the lack of "on the scene" learning contents, I propose incorporating movements based on frequently appearing characters in popular animations and acting them out slowly and including the "Slow Motion" kinetic effect, a way of enabling someone to learn and sense astrodynamic fundamental principles by oneself. It is a new method of learning movement, a plan made to achieve sensual performance gestures, and an improvement in direction for students who wish to become animators in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2507-2517
• /
• 2015

In this research, we aim to analyze the trend of Huawei's PCT patent applications. As a result of analyzing Huawei's PCT patents by dividing temporal spans into three periods - the early 2000s, the late 2000s, and the early 2010s -, the following characteristics have been observed. First, the number of PCT patent applications has conspicuously increased from the early 2000s to the late 2000s and this trend has continued during the early 2010s. Second, in terms of a core technological field, whereas Huawei focused on the development of technologies in the 'H04L: transmission of digital information' sector during the early/late 2000s, it changed this field to the 'H04W: wireless communication networks' sector during the early 2010s. Lastly, in the case of the patent maps, it was found that while general communications technologies, as expressed with such keywords as 'user' and 'network,' were actively developed during the early/late 2000s, mobile phone-related technologies grasped this leading position, as shown with the keywords including 'user equipment,' 'base station,' and 'MME,' during the early 2010s. It was also noticeable that Huawei filed LTE-related patent applications more actively than Apple and Samsung Electronics, which implies that it will presumably pioneer the global market more aggressively than its competitors in the future.