• Water for future
• /
• v.12 no.2
• /
• pp.49-55
• /
• 1979

The purpose of this study is to develope the computer program to compute the unsteady, transient flow conditions in a hydraulic system. The unstready flow condition may be brought about due to power failure to pump motors, pump start-up or modulation of control valve. The program was written specially for analyzing the water-hammer in the pumping system. The pumping system which can be simulated by the program can contain pipelines, tunnel, surge tanks, branched lines, reservoirs, dead end pipes and valve controls. The use of a computer program to analyze haydranlic transients is of great benifit to the designers of transmission main and distribution systems. Advantages include time savings, the ability to analyze complex piping systems, and increased accuracy. The author outlines a pogram developed for the above system.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1451-1454
• /
• 2002

In recent years, there are growing concerns about land mobile satellite (LMS) communication systems and mobile stratospheric communication systems (SCS) for the purpose of service upgrade of personal and mobile communications in near future. It is important to possess accurate channel model for prediction of the above system performance. Thus, in this paper, we evaluate the bit error rates of a coded BPSK system based on realistic channel model which can be applied to stratospheric communication systems. The channel data was made by fitting the parameters of probability distribution model to measured data. This approach was proposed by Corraza〔1〕and modified by You〔2〕. And also the effects of channel codings on the system performance are analyzed. As results, we can get the performance curve characteristics on realistic Rician log-normal fading channels with various communication environments.

• Solar Energy
• /
• v.19 no.4
• /
• pp.63-69
• /
• 1999

The conventional grid connected PV(Photovoltaic) system has a unstable output pattern due to its dependence on the weather condition, although solar-cell array averagely has a regular output characteristics to have a peak output nearly at noon. Therefore assuming the high density grid connection in the future, this unstable output pattern can be one of the main reasons to generate power disturbance such as voltage variation, frequency variation and harmonic voltage generation in low voltage distribution line. However general grid connected solar-cell system do not have functions to cope with these disturbances. Therefore this study proposed a advanced type grid connected PV system with functions to suppress output power fluctuation due to solar-cell array output variation and showed the levelling effect of fluctuation due to instantaneous array output variation.

• IE interfaces
• /
• v.19 no.4
• /
• pp.333-341
• /
• 2006

RFID (Radio Frequency Identification) is a technology that can input identification information to microchip and make goods, animals, persons recognized, chased, and managed using radio frequency, and is founded on the core technology of ubiquitous environment of the future. In this paper, we propose a RFID integrated system designed to manage the lifecycle of an individual product efficiently. The proposed system can enable traceability and visibility of items through their entire life by integrating distribution and banking information on the basis of EPCglobal Network. It may provide the infra of Digital Manufacturing and RTE (Real Time Enterprise) and effective information sharing structure with existing legacy system (ERP, CRM, SCM) by real time.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.5
• /
• pp.217-223
• /
• 2006

When only partial information is available about equipment failures (installation date and amount, as well as failure and replacement rates), data on sufficiently large number of yearly populations of the components can be combined, and estimation of model parameters may be possible. The parametric models may then be used for forecasting of the system's short term future failure and for formulation of replacement strategies. We employ the Weibull distribution and show how we estimate its parameters from past failure data. Using Monte Carlo simulations, it is possible to assess confidence ranges of the forecasted component performance data.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.331-334
• /
• 2005

This paper suggests the Ethernet aggregation to XGMII framing procedure (EAXFP) mechanism to economically combine the traffic adaptation technology with the link aggregation method in designing 10 Gigabit Ethernet (10 GbE) interfaces. This design sidesteps the data-loss issues that can result from designing an interface with only one link. The most critical issue in relation to the link aggregation interface is the algorithm used to control frame distribution between the ten ports. The proposed EAXFP mechanism offers an efficient link aggregation method as well as an efficient frame distribution algorithm, which maximize the throughout of the 10 GbE interface. In the experiment and analysis of the proposed mechanism, it was also discovered that the 10 GbE interface that uses the proposed EAXFP mechanism significantly reduced the packet loss rate. When there will be heavy traffic loads come about in the future, the proposed EAXFP mechanism assures an efficient and economical transmission performance on the router system.

• Korean Management Science Review
• /
• v.10 no.2
• /
• pp.27-42
• /
• 1993

Markov chain models can be used to predict the state of the system in the future. We extend the existing Markov chain models in two ways. For the stationary model, we propose a procedure that obtains the transition probabilities by appling the empirical Bayes method, in which the parameters of the prior distribution in the Bayes estimator are obtained on the collaternal micro data. For non-stationary model, we suggest a procedure that obtains a time-varying transition probabilities as a function of the exogenous variables. To illustrate the effectiveness of our extended models, the models are applied to the macro and micro time-series data generated from actual survey. Our stationary model yields reliable parameter values of the prior distribution. And our non-stationary model can predict the variable transition probabilities effectively.

• Journal of Distribution Science
• /
• v.12 no.5
• /
• pp.93-107
• /
• 2014

Purpose - The pool of entrepreneurs with progressive qualities such as creativity and innovation was considered concurrently with such factors as work and capital that stimulate economic development and growth. This study aims to present a model to support the development of a strategic approach for achieving an overall academic entrepreneurship system in Iran. Research design, data, and methodology - The research design of this study is based on applied research because of its objectives, using principles and techniques formulated for basic research to solve operational and real organizational issues. This design also drives the method used, describing and interpreting the findings. Secondary data (library research) was used for this study's data collection. Because of this research's essential characteristics, no hypothesis is launched, and no research setting, questionnaire design, population or population sampling, validity or reliability tests, or statistical analysis are needed. Results and Conclusions - The model is created using a strategic approach acting in an octal setting comprising social, cultural, legal, economic, political, technological, competitive, and natural environments to present a conceptual framework for future studies.

• Journal of Distribution Science
• /
• v.13 no.10
• /
• pp.5-13
• /
• 2015

Purpose - This study aims to suggest appropriate policies and performance indicators for financial aid recipients. It analyzes the existing regular government policy funds support project, especially its propriety and reasonability. Research design, data, and methodology - When financial aid is effective, it should be able to predict small enterprise business results. Additionally, there should be an evaluation, checking before and after performance rates so that the rate of achievement and outcome can be measured. This study's contribution for small enterprises is in researching the best way to improve this support system. Results - The Small Enterprise and Market Service (SEMAS), currently designated as a support organization for implementing the government financial aid project, has assessment indicators. However, these focus mainly on quantitative indicators and survey results. Conclusions - In the future, there is some need to draw up measures, setting the right direction for developing policies for the small enterprise fund loans and improving the management of the plans. Eventually, this effort will dispel concerns about the present support policy, which is considered to be weakening small enterprises.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.1
• /
• pp.36-43
• /
• 2013

Many retailer store managers are experiencing the situation where some customers balk at purchasing products if the stock is low. In this paper, we extend the single period newsvendor model in an environment of customer balking behavior occurring at double threshold inventory levels assuming the chance of sales during balking is a discrete function of inventory level. Our analysis is based on the assumption that only the mean and the variance of demand are known, without assuming any specific distributional form. We derive the explicit general expression of optimal order quantity with unknown distribution of demand with double threshold inventory levels of customer balking. Then, we illustrate the concepts developed here through simple numerical examples and conclude the future research topics under balking situation.