• 제목/요약/키워드: Fusion rate

검색결과 806건 처리시간 0.023초

KOMPSAT-3 위성의 Time Offset 계산을 통한 항공기 속력 및 고도 추정 (Aircraft Velocity and Altitude Estimation through Time Offset Calculation of KOMPSAT-3 Satellite)

  • 정세정;신현길;김도훈;송아람;이원희
    • 대한원격탐사학회지
    • /
    • 제38권6_4호
    • /
    • pp.1879-1887
    • /
    • 2022
  • 본 연구에서는 KOMPSAT-3 위성에서 촬영된 항공기의 속력과 고도를 추정하는 방법을 제안하였다. 이를 위해 KOMPSAT-3 위성의 촬영 방식, 센서의 구조, 그리고 위성의 궤도에 따른 움직임으로 인해 생기는 시차 효과와 이로 인한 밴드 간 촬영 시차인 Time Offset을 계산하였으며, 이 과정에서 고속도로 위를 달리는 화물차를 이용하였다. 또한, 제안 기법에서는 영상 내 항공기 위치의 좌표를 이용해 항공기의 이동 방향, 시차 효과로 인한 이동 방향 등을 계산하였으며, 메타데이터로부터 KOMPSAT-3 위성의 자세 정보를 계산하여 항공기의 속력 및 고도를 추정하였다. 제안 기법을 통해 추정된 값을 automatic dependent surveillance-broadcast (ADS-B)에 기록된 항공기의 속력 및 고도 값과 오차율을 이용하여 비교한 결과, 대형 항공기(I1, I3, S2)에서의 오차율이 경비행기(I2, S2)의 오차율보다 낮아 제안 기법을 이용해 추정한 항공기의 속력과 고도 값이 대형 항공기에서 비교적 높은 정확도를 갖는 것을 확인할 수 있었다.

탈미네랄 골분이 비율별로 포접된 알지네이트 미세캡슐을 이용한 조직공학적 연골재생 (Effect of Ratio of Demineralized Bone Powder with Alginate Microcapsules on Articular Cartilage Regeneration)

  • 김아람;김혜민;이정근;이지혜;송정은;윤건호;이동원;강길선
    • 폴리머
    • /
    • 제36권6호
    • /
    • pp.768-775
    • /
    • 2012
  • 해조류로부터 얻어지는 알지네이트는 캡슐화된 세포의 생존율에 긍정적인 영향을 끼치며 살아있는 세포를 신속하게 포접하여 캡슐화할 수 있어 세포이식을 위한 생체재료 분야에 널리 쓰인다. 탈미네랄화된 골분(DBP)은 천연 뼈조직으로부터 유래되어 조직과의 반응정도가 낮고 항원성 또한 낮아 임상에 적용되어 사용되어 왔다. 알지네이트에 비율별 DBP을 포함시켜 연골세포를 파종한 뒤 미세캡슐을 제조한 후 MTT 분석을 통하여 세포의 부착 및 증식률을 관찰하였고 glycosaminoglycan(sGAG)와 콜라겐 함량 측정과 연골세포의 특정유전자 표현형을 확인하기 위하여 PCR을 실시하였다. 또한 연골세포가 파종된 알지네이트 미세캡슐을 누드마우스의 피하에 이식한 뒤 적출하여 면역화학적 염색을 실시하였다. 실험 결과 1%의 DBP를 함유한 알지네이트 미세캡슐에서 가장 높은 세포 증식률을 보였고 표현형 유지에도 긍정적인 영향을 미치는 것을 확인하였다. 이번 연구 결과를 토대로 알지네이트와 DBP를 이용한 미세캡슐을 제조함으로써 DBP내의 성장인자와 알지네이트의 상호작용으로 인하여 연골세포의 성장에 긍정적인 영향을 미쳐 생체공학적 지지체로 적합할 것으로 예상된다.

Selective Laser Melting 방식으로 적층가공된 Ti-6Al-4V 합금의 내마모성 특성에 미치는 고온 UNSM 처리 영향에 대한 연구 (Effects of High-temperature UNSM Treatment on Wear Resistance of Ti-6Al-4V Alloy Prepared by Selective Laser Melting)

  • 산성충호;노준석;편영식;아마노프 아웨즈한
    • Tribology and Lubricants
    • /
    • 제36권1호
    • /
    • pp.47-54
    • /
    • 2020
  • In this study, the effects of ultrasonic nanocrystal surface modification (UNSM) treatment at room and high temperatures (RT and HT of 400℃) on friction and wear behavior of Ti-6Al-4V alloy prepared by selective laser melting (SLM) were investigated. The objective of this study is to improve the mechanical properties and frictional behavior of Ti-6Al-4V alloy by UNSM treatment. Dry friction and wear tests were conducted using a ball-on-disk method at RT with a bearing steel as the counter ball. Due to the high HT and UNSM treatment, the surface hardness tended to increase and surface roughness tended to reduce. X-ray diffraction (XRD) analysis showed that nanocrystallization structure and compressive residual stress were formed at the surface layer after UNSM treatment at both RT and HT. After UNSM treatment, it was observed that the wear rate was reduced by about 6% for the specimen treated at RT and a 28% reduction for the specimen treated at HT in comparison with the untreated one. Based on scanning electron microscope (SEM) images showed that the damage caused by fatigue wear occurred in the wear track of the heat-treated specimen, and it is believed to be the cause of the highest wear rate. Mechanical properties and wear resistance of Ti-6Al-4V alloy were improved and prospect of industrial application was confirmed. Further research is still required to improve the characteristics of SLM Ti-6Al-4V alloy to the level of wrought Ti-6Al-4V alloy.

A Surgical Option for Multilevel Anterior Lumbar Interbody Fusion with Ponte Osteotomy to Achieve Optimal Lumbar Lordosis and Sagittal Balance

  • Suh, Loo-Ree;Jo, Dae-Jean;Kim, Sung-Min;Lim, Young-Jin
    • Journal of Korean Neurosurgical Society
    • /
    • 제52권4호
    • /
    • pp.365-371
    • /
    • 2012
  • Objective : To document lumbar lordosis (LL) of the spine and its change during surgeries with the different height but the same angle setting of the anterior cage. Additionally, we attempted to determine if sufficient LL is achieved at different cage heights and to quantify the change in LL during multi-level anterior lumbar interbody fusion (ALIF). Methods : The medical records and radiographs of 42 patients who underwent more than 2 level ALIFs between 2008 and 2009 were retrospectively reviewed. We evaluated 3 parameters seen on lateral whole spine radiographs : LL, pelvic incidence (PI), and sagittal vertical axis (SVA). The mean follow-up time was 28.1 months and the final follow-up radiographs of all patients were reviewed at least 2 years after surgery. Statistical analysis was performed using the paired t-tests. Results : Lumbar lordosis had changed up to 30 degrees immediately and 2 years after surgery (preoperative mean LL, SVA : 22.45 degrees, 112.31 mm; immediate postoperative mean LL, SVA : 54.45 degrees, 37.36 mm; final follow-up mean LL, SVA : 49.56 degrees, 26.95 mm). Our goal of LL is to obtain as much PI as possible, preoperative mean PI value was $55.38{\pm}3.35$. The pre-operative and two year post-surgery follow-up mean of the Japanese Orthopedic Association score were $9.2{\pm}0.6$ and $13.2{\pm}0.6$ (favorable outcome rate : 95%), respectively. In addition, we were able to obtain good clinical outcomes and sagittal balance with a subsidence rate of 22.7%. Conclusion : We were able to achieve sufficient LL, such that it was similar to the PI, utilizing multi-level ALIF with the use of a tall cage with the same angle setting of the cage. We have found out that achieving sufficient lumbar lordosis and sagittal balance require an anterior lumbar cage with high angle and height.

2D와 3D 영상의 정량적 영상피로 비교 (Quantitative Analysis of Display Fatigue induced by 2D, 3D Videos)

  • 한승조
    • 디지털융복합연구
    • /
    • 제14권3호
    • /
    • pp.329-335
    • /
    • 2016
  • 본 논문의 목적은 운용자가 2D와 3D 영상을 주시할 경우 영상피로를 정량적으로 비교하는 것이다. 16명의 20대 남 여가 2D와 3D 영상을 10분간 관람을 한 후, 관람 전과 후의 Flicker Fusion Frequency(FFF)와 Cyversickness가 측정되었다. 관람 전과 후의 두 종속변수를 비교함으로써 정량적으로 3D가 2D에 비해 어느 정도 영상피로를 발생시키는지를 이론적 고찰과 함께 과학적인 기기와 방법으로 측정하였다. 주관적인 척도인 Cybersickness 증가율은 2D에 비해서 3D가 4배, FFF 감소율은 3D가 2D에 비해 2배 높은 결과를 보였다. 본 연구는 일반적으로 3D 영상이 2D 영상에 비해 영상피로를 크게 유발함을 과학적인 방법과 객관적인 데이터로 증명했다는데 의의가 있다.

홀센서 집게형 맥진기와 심전도-용적맥파계를 이용한 한양방 융합용 환자감시장치 개발연구 (Development of Oriental-Western Fusion Patient Monitor by Using the Clip-type Pulsimeter Equipped with a Hall Sensor, the Electrocardiograph, and the Photoplethysmograph)

  • 이대희;홍유식;이상석
    • 한국자기학회지
    • /
    • 제23권4호
    • /
    • pp.135-143
    • /
    • 2013
  • 요골 동맥의 중앙 부에 위치 한 "관"이란 곳에 영구자석 부착하여 맥의 움직임에 따라 발생하는 자기장의 변화를 홀센서로 정량화하여 맥진파형을 측정하는 집게형 맥진기를 개발하였다. 홀소자 맥진센서로 얻어진 전기적 신호로 심전도와 용적맥파계를 사용해 동시에 측정된 맥박수, 비침습적 혈압, 호흡수, 맥파전달속도와 공간맥파전달속도를 환자감시장치에 디스플레이하였다. 개발된 장치는 한방과 양방의 의료용 저장 매체와 새롭게 시도되거나 융합되어지고 있는 환자감시 장비 및 유비쿼터스 헬스케어 시스템 개발에 도움이 될 것이다.

Human embryos derived from first polar body nuclear transfer exhibit comparatively abnormal morphokinetics during development

  • Leila Heydari;Mohammad Ali Khalili;Azam Agha Rahimi;Fatemeh Shakeri
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제50권3호
    • /
    • pp.177-184
    • /
    • 2023
  • Objective: Reconstructed oocytes after polar body genome transfer constitute a potential therapeutic option for patients with a history of embryo fragmentation and advanced maternal age. However, the rescue of genetic material from the first polar body (PB1) through introduction into the donor cytoplasm is not yet ready for clinical application. Methods: Eighty-five oocytes were obtained following in vitro maturation (IVM) and divided into two groups: PB1 nuclear transfer (PB1NT; n=54) and control (n=31). Following enucleation and PB1 genomic transfer, PB1 fusion was assessed. Subsequently, all fused oocytes underwent intracytoplasmic sperm injection (ICSI) and were cultured in an incubator under a time-lapse monitoring system to evaluate fertilization, embryonic morphokinetic parameters, and cleavage patterns. Results: Following enucleation and fusion, 77.14% of oocytes survived, and 92.59% of polar bodies (PBs) fused. However, the normal fertilization rate was lower in the PB1NT group than in the control group (56.41% vs. 92%, p=0.002). No significant differences were observed in embryo kinetics between the groups, but a significant difference was detected in embryo developmental arrest after the four-cell stage, along with abnormal cleavage division in the PB1NT group. This was followed by significant between-group differences in the implantation potential rate and euploidy status. Most embryos in the PB1NT group had at least one abnormal cleavage division (93.3%, p=0.001). Conclusion: Fresh PB1NT oocytes successfully produced normal zygotes following PB fusion and ICSI in IVM oocytes. However, this was accompanied by low efficiency in developing into cleavage embryos, along with an increase in abnormal cleavage patterns.

Risk Factors of Allogenous Bone Graft Collapse in Two-Level Anterior Cervical Discectomy and Fusion

  • Woo, Joon-Bum;Son, Dong-Wuk;Lee, Su-Hun;Lee, Jun-Seok;Lee, Sang Weon;Song, Geun Sung
    • Journal of Korean Neurosurgical Society
    • /
    • 제62권4호
    • /
    • pp.450-457
    • /
    • 2019
  • Objective : Anterior cervical discectomy and fusion (ACDF) is commonly used surgical procedure for cervical degenerative disease. Among the various intervertebral spacers, the use of allografts is increasing due to its advantages such as no harvest site complications and low rate of subsidence. Although subsidence is a rare complication, graft collapse is often observed in the follow-up period. Graft collapse is defined as a significant graft height loss without subsidence, which can lead to clinical deterioration due to foraminal re-stenosis or segmental kyphosis. However, studies about the collapse of allografts are very limited. In this study, we evaluated risk factors associated with graft collapse. Methods : We retrospectively reviewed 33 patients who underwent two level ACDF with anterior plating using allogenous bone graft from January 2013 to June 2017. Various factors related to cervical sagittal alignment were measured preoperatively (PRE), postoperatively (POST), and last follow-up. The collapse was defined as the ratio of decrement from POST disc height to follow-up disc height. We also defined significant collapses as disc heights that were decreased by 30% or more after surgery. The intraoperative distraction was defined as the ratio of increment from PRE disc height to POST disc height. Results : The subsidence rate was 4.5% and graft collapse rate was 28.8%. The pseudarthrosis rate was 16.7% and there was no association between pseudarthrosis and graft collapse. Among the collapse-related risk factors, pre-operative segmental angle (p=0.047) and intra-operative distraction (p=0.003) were significantly related to allograft collapse. The cut-off value of intraoperative distraction ${\geq}37.3%$ was significantly associated with collapse (p=0.009; odds ratio, 4.622; 95% confidence interval, 1.470-14.531). The average time of events were as follows: collapse, $5.8{\pm}5.7months$; subsidence, $0.99{\pm}0.50months$; and instrument failure, $9.13{\pm}0.50months$. Conclusion : We experienced a higher frequency rate of collapse than subsidence in ACDF using an allograft. Of the various preoperative factors, intra-operative distraction was the most predictable factor of the allograft collapse. This was especially true when the intraoperative distraction was more than 37%, in which case the occurrence of graft collapse increased 4.6 times. We also found that instrument failure occurs only after the allograft collapse.

Does Differentiation of Self Matter in University Students' Career Exploration?: Focused on Hospitality Majored Student

  • Kim, Jieun;Kwon, Youngju
    • 한국조리학회지
    • /
    • 제20권5호
    • /
    • pp.1-10
    • /
    • 2014
  • The employment rate has become the standard for university values. This raises the need to investigate the antecedents of university students' career exploration. Focused on the hospitality majored students, this study aims to investigate both individual and relational factors that influence their career exploration behaviors. Differentiation of self has been chosen as the individual and the relational antecedents based on Bowen's theory. It was investigated whether each dimension(I-position, emotional reactivity, fusion with others, and emotional cutoff) explains the amount of self-exploration and the amount of environmental exploration. The university students majoring in hospitality were surveyed and a total of 269 cases out of 300 cases were analyzed employing descriptive statistics and multi-variate analysis of variance, and structural equation modeling(SEM). The study found that I-position positively influenced self-exploration and environmental exploration. Emotional reactivity made an influence on environmental exploration, while it failed to explain self-exploration. Fusion with others and emotional cutoff also significantly influenced environmental exploration, however, it didn't make any significant influence on self-exploration. This study implies that the college of hospitality majors needs to understand that differentiation of self forms through family relationship and needs to provide the students the programs of how to understand themselves and what to do for their career exploration.