• Journal of Welding and Joining
• /
• 제30권1호
• /
• pp.64-71
• /
• 2012

The characteristics of high heat input (342kJ/cm) EG (Electro Gas Arc) welded joint of EH36-TM steel has been investigated. The weld metal microstructure consisted of fine acicular ferrite (AF), a little volume of polygonal ferrite (PF) and grain boundary ferrite (GBF). Charpy impact test results of the weld metal and heat affected zone (HAZ) met the requirement of classification rule (Min. 34J at $-20^{\circ}C$). In order to evaluate the relationship between the impact toughness property and the grain size of HAZ, the austenite grain size of HAZ was measured. The prior austenite grain size in Fusion line (F.L+0.1 mm) was about $350{\mu}m$. The grain size in F.L+1.5 mm was measured to be less than $30{\mu}m$ and this region was identified as being included in FGHAZ(Fine Grain HAZ). It is seen that as the austenite grain size decreases, the size of GBF, FSP (Ferrite Side Plate) become smaller and the impact toughness of HAZ increases. Therefore, the CGHAZ was considered to be area up to 1.3mm away from the fusion line. Results of TEM replica analysis for a welded joint implied that very small size ($0.8\sim1.2{\mu}m$) oxygen inclusions played a role of forming fine acicular ferrite in the weld metal. A large amount of (Ti, Mn, Al)xOy oxygen inclusions dispersed, and oxides density was measured to be 4,600-5,300 (ea/mm2). During the welding thermal cycle, the area near a fusion line was reheated to temperature exceeding $1400^{\circ}C$. However, the nitrides and carbides were not completely dissolved near the fusion line because of rapid heating and cooling rate. Instead, they might grow during the cooling process. TiC precipitates of about 50 ~ 100nm size dispersed near the fusion line.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.220-220
• /
• 2009

We are developing of the evaluation technique and system for testing the performance of circuit breaker using Simplified Synthetic circuit. This facility specification is up to 90[kApeak] and up to 300[kVpeak]. It is possible to verify the interrupting capability by using low-energy and reduce the development period and the cost.

• 한국과학예술포럼
• /
• 제30권
• /
• pp.33-40
• /
• 2017

The study has been initiated on the background of rapidly changing environment, and from the perspectives that new ecological systems are continuously generated accordingly in various fields. Recently, ICT platform, which is the platform related to information communication, has drawn much attention, and many tools are being made that can design and implement documents in a specific on-line space by utilizing UI/UX authoring tools for on-line contents sharing platforms which are public platforms for industrial and educational uses. Following these trends, actual building environment for 'XElF', a newly developed on-line contents sharing platform, and actual design proposal for UI/UX authoring tools will be described according to the sequences of building the platform. Before this design proposal is actually utilized in the future, opinions have been collected from related persons through an actual survey. Efforts are being made to reduce problems, which can be generated in the future in the actual on-line contents education environment, through the results of the study so that the platform can be produced without errors. The final results for this matter are planned to be posted by papers in the future.

• BMB Reports
• /
• 제46권12호
• /
• pp.606-610
• /
• 2013

Glucagon like peptide-1 (GLP-1) regulates glucose mediated-insulin secretion, nutrient accumulation, and ${\beta}$-cell growth. Despite the potential therapeutic usage for type 2 diabetes (T2D), GLP-1 has a short half-life in vivo ($t_{1/2}$ <2 min). In an attempt to prolong half-life, GLP-1 fusion proteins were genetically engineered: GLP-1 human serum albumin fusion (GLP-1/HSA), AGLP-1/HSA which has an additional alanine at the N-terminus of GLP-1, and AGLP-1-L/HSA, in which a peptide linker is inserted between AGLP-1 and HSA. Recombinant fusion proteins secreted from the Chinese Hamster Ovary-K1 (CHO-K1) cell line were purified with high purity (>96%). AGLP-1 fusion protein was resistant against the dipeptidyl peptidase-IV (DPP-IV). The fusion proteins activated cAMP-mediated signaling in rat insulinoma INS-1 cells. Furthermore, a C57BL/6N mice pharmacodynamics study exhibited that AGLP-1-L/HSA effectively reduced blood glucose level compared to AGLP-1/HSA.

• Journal of Electrical Engineering and Technology
• /
• 제1권3호
• /
• pp.359-365
• /
• 2006

Since the start of the KSTAR (Korea Superconducting Tokamak Advanced Research) project, Instrumentation and Control (I&C) of the Neutral Beam Test Facility (NB-TF) has been striving to answer diverse requests arising from various facets during the project's development and construction phases. Hard-wired electrical circuits have been designed, tested, fabricated, and finally installed to the relevant parts of the system. In relation to the vacuum system I&C, controlling functions for the rotary pumps, a Roots pump, two turbomolecular pumps, and four cryosorption pumps have been constructed. I&C for the ion source operation are the temperature and flow rate signal monitoring, Langmuir probe signal measurements, gradient grid current measurements, and arc detector circuit. For the huge power system to be monitored or safely operated, many temperature measurement functions have also been implemented for the beam line components like the neutralizer, bending magnet, ion dump, and calorimeter. Nearly all of the control and probe signals between the NB test stand and the control room were made to be transmitted through the optical cables. Failures of coolant flow or beam line vacuum pressure were made to be safely blocked from influencing the system by an appropriate interlock circuit that will shut down the extraction voltage application to the system or prevent damages to the vacuum components. Preliminary estimation of the beam power through the calorimetric measurement shows that 87.9% of the total power of the 60kV/18A beam with 200 seconds duration is absorbed by the calorimeter surface. Most of these I&C results would be highly appropriate for the construction of the main NBI facility for the KSTAR national fusion research project.

• Journal of Welding and Joining
• /
• 제4권1호
• /
• pp.40-46
• /
• 1986

This investigation studied the toughness variations in the narrow gap weldment with the notch location. Specimens with the notch at the center of the weld metal showed the lowest toughness. As the location of notchmoves to fusion line, the impact properties improve reaching a maximum at the fusion boundaries. This improvement in toughness can be explained by the microstructural feature showing in the narrow gap weldment. "one pass/layer" technique performed in narrow gap welding results in the increased proportion of refined structure as approaching to fusion boundary from weld center and thus leave 100% refined structure along the fusion boundary. HAZ also shows 100% refined structure with respect to base metal structure accompanied with the significant suppression of ductile-brittle transition temperature.mperature.

• 제어로봇시스템학회논문지
• /
• 제16권2호
• /
• pp.177-187
• /
• 2010

A MTG (Multimode Tracking and Guidance) system is employed to compensate for the limitations of individual seekers such as RF (Radio frequency) or IIR (Imaging Infra-red) and to improve the overall tracking and guidance performance in jamming, clutter, and adverse weather environments. In the MTG system, tracking filter, data association, and data fusion methods are important elements to maximize the effectiveness of precision homing missile guidance. This paper proposes the formulation of a Kalman filter for the estimation of line-of-sight rate from seeker measurements in missiles guided by proportional navigation. Also, we suggest the HPDA (Highest Probability Data Association) and data fusion methods of the MTG system for target tracking in the adverse environments. Mont-Carlo simulation is employed to evaluate the overall tracking performance and guidance accuracy.

• 한국진공학회지
• /
• 제16권2호
• /
• pp.153-159
• /
• 2007

KSTAR 장치의 저온 component에 헬륨을 공급하기 위한 헬륨라인은 크게 두 가지로 이루어져 있다. 냉동기에서 KSTAR 저온용기 외부까지의 트랜스퍼 라인과, 저온용기 내부의 헬륨라인이다. KSTAR 장치는 3가지 종류의 헬륨을 사용하여 각 저온 component를 냉각하는데, 초전도 자석 시스템과 버스라인에는 초임계 헬륨, 전류인입장치에는 액체 헬륨, 열차폐체에는 가스 헬륨을 공급한다. 저온용기 내부의 헬륨라인은 냉동기에서 저온용기 근처까지 연결된 배관을 저온용기 내부의 각 장치에 최단거리로 열손실 없이 설치하여 각 장치가 정상 작동하도록 하는데 그 목적이 있다. 저온용기 내부의 헬륨라인은 최대 20bar로 가압되는 운전시간 동안에 헬륨누설 없이 설치되어야 한다. 그리고 상온으로 부터의 복사열을 차단하기 위하여 다층절연제로 배관을 감싸주어야 하고 고전압 부분은 프리프레그 테잎으로 절연되어야 한다. 전기절연체는 세라믹과 스테인레스 스틸 튜브를 브레이징 접합 방법으로 연결하여 만들어진 것으론 배관과 배관, 배관과 저온 component간의 절연을 위해 사용되고, 헬륨라인과 동일하게 4.5K 초임계 헬륨온도에서 누설이 없어야 한다. 따라서 모든 전기절연체는 액체질소에 침전시켜 열충격을 가하고, 내부에 30 bar를 가압하여 진공 누설시험을 한다. 그리고 초전도 자석과 배관의 절연체로 사용되므로 15kV 고전압 절연 검사를 한다. 전기절연체의 세라믹 부분은 구조적 보강을 위하여 추가적으로 표면에 절연 작업을 한다. 현재 대부분의 저온용기 내부의 헬륨 라인은 설치 완료되어 있으며, 최종 검사가 진행 중이다.

• 한국의류학회지
• /
• 제29권9_10호
• /
• pp.1253-1264
• /
• 2005

The background, concept, and design characteristics of the Caports style, which comes into new domestic fashion trend of sportism, are discussed in this article. Analysis are performed with utilizing pictures, advertizements of fashion magazine such as Vogue Korea, Fashionbiz, Ceci, etc., and photographs from internet sites, domestic papers since 2002. The result of this study is as followings: New life style, arose from the change of social and cultural environment, such as increase in leisure time, fusion and well-being trend, begins to be reflected in caports style in the form of stress on utility and functionality. The caports style is a fusion style based on sports wear with character and fashion. And, it can be adapted as a sports wear and daytime wear. With respect to the form, it emphasizes healthy body line, and as for the material, it strikingly utilizes various and functional materials. It also shows active and cheerful image using bright color, and utilizes functional and decorative details such as line-tape, zipper, hood. The most important characteristic of the caports style is to present a new liberal style by mix & match, layering, and exposing

• 한국정보통신학회논문지
• /
• 제12권7호
• /
• pp.1202-1208
• /
• 2008

본 논문에서는 유삭식 심해무인잠수정인 해미래와 진수장치인 해누비로 이루어지는 심해무인잠수정 시스템의 항법 알고리즘에 사용되는 다중 센서 융합 기법에 대하여 소개하고 있다. 수중 위치 추적 시스템의 성능은 초단기선, 장기선, 고도계와 같은 수중 음향 센서의 성능에 의해 결정되는데 수중음향 신호는 다양한 형태의 노이즈를 가지고 있어 특별한 주의가 요망된다. 본 논문에서는 이동 관측창 개념을 이용한 실용적인 다중 센서 융합 알고리즘을 제안하였다. 해미래의 동해 실해역 시험을 통해 획득된 계측치에 본 알고리즘을 적용하여 그 성능을 고찰한 결과 우수한 성능을 보임을 알 수 있었다.