• Tribology and Lubricants
• /
• v.36 no.4
• /
• pp.244-252
• /
• 2020

Materials manufactured by powder metallurgy (PM) are widely used in various applications such as water pump, shock absorber, and airplane components due to the reduction in the cost and weight. In this study, tribological properties of carbon steel subjected by surface treatment were investigated. The main purpose is to increase the strength and improve the tribological properties by reducing pores that formed by PM. Moreover, the surface treatment was carried out at room and high temperatures (RT and HT). The surface roughness of the untreated (NON) and treated (AFTER) samples was measured. It was found that the surface roughness was reduced after both the RT AFTER and HT AFTER compared to RT NON sample. The tribological properties of the samples were performed against bearing steel ball under dry conditions. The friction coefficient of the RT NON samples was reduced by 22% and 56% RT AFTER and HT AFTER, respectively. The wear volume of the RT NON sample was also reduced by 43% and 87% RT AFTER and HT AFTER, respectively. Tribocorrosion tests were also performed and it was found that the surface of the RT AFTER, HT AFTER samples was less corroded compared to RT NON sample. The HT AFTER sample demonstrated a relatively higher corrosion potential in comparison with the RT AFTER samples. Hence, it was confirmed that after surface modification the surface roughness and hardness of the samples were significantly improved resulting in improvement in tribological and tribocorrosion behaviors of PM carbon steel.

• The Korean Journal of Zoology
• /
• v.28 no.3
• /
• pp.125-136
• /
• 1985

The present study has been undertaken to elucidate whether there are developmentally regulated proteins in chick myogenesis by observing cellular and plasma membrane glycoproteins by use of labelled-Con A staining. At least three classes and five classes of glycoproteins can be identified in terms of their occurrence and their change in levels, respectively. As to the former, there are glycoproteins which are specific to cellular fraction are eight, those which are specific to plasma membrane are four, and those which occur in both fraction are nine. Likewise, as to the latter, there are glycoproteins which are invariant, those which increase in level, those which decrease, those which increase and subsequently decrease, and those which decrease and subsequently increase. The present experiment reveals that the level of fibronectin does decrease after the fusion and that the apparent conflicting results so far reported may be due to the difference in time point setting during fusion and myotube stages. It is thought to be a general tendency that glycoproteins of high-molecular-weight decrease and those of low-molecular-weight increase in relative levels as the fusion proceeds. These results are suggestive of the fact that a major structural reorganization of glycoproteins does occur in association with myoblast fusion.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1017-1020
• /
• 1993

This paper describes a neo fuzzy neuron which was produced by a fusion of fuzzy logic and neuroscience. Some learning algorithms are presented. The guarantee for the global minimum on the error-weight space is proved by a reduction to absurdity. Enhanced is that the learning speed of the neo fuzzy neuron exceeds 100,000 times of that of conventional multi-layer neural networks.

• Journal of Korea Multimedia Society
• /
• v.18 no.4
• /
• pp.460-472
• /
• 2015

Most of previous visual attention system finds attention regions based on saliency map which is combined by multiple extracted features. The differences of these systems are in the methods of feature extraction and combination. This paper presents a new system which has an improvement in feature extraction method of color and motion, and in weight decision method of spatial and temporal features. Our system dynamically extracts one color which has the strongest response among two opponent colors, and detects the moving objects not moving pixels. As a combination method of spatial and temporal feature, the proposed system sets the weight dynamically by each features' relative activities. Comparative results show that our suggested feature extraction and integration method improved the detection rate of attention region.

• Journal of Broadcast Engineering
• /
• v.21 no.4
• /
• pp.515-524
• /
• 2016

Infrared (IR) wavelength is out of visible range and thus usually cut by hot filters in general commercial cameras. However, some information from the near-IR (NIR) range is known to improve the overall visibility of scene in many cases. For example when there is fog or haze in the scene, NIR image has clearer visibility than visible image because of its stronger penetration property. In this paper, we propose an algorithm for fusing the RGB and NIR images to obtain the enhanced images of the outdoor scenes. First, we construct a weight map by comparing the contrast of the RGB and NIR images, and then fuse the two images based on the weight map. Experimental results show that the proposed method is effective in enhancing visible image and removing the haze.

• Journal of Life Science
• /
• v.9 no.3
• /
• pp.253-261
• /
• 1999

Leptin gene, an obesity gene, has been known to involve in the regulation of food intake and body weight. It is also thought to be related to the glucose metabolism, insulin secretion and type II diabetes mellitus. Recently, the production of recombinant leptin protein has been attempted for the application in the treatment of obesity and the correction of hereditary obesity and type II diabetes. In the present study, leptin cDNA was cloned from mouse fat cells by RT-PCR and prokaryotic expression of leptin was attempted in order ot prepare a leptin-specific antigen. Immunization of a rabbit with the leptin-specific antigen into a rabbit resulted in the generation of leptin-specific antiserum that could be useful in the detection of leption expressed in various tissues. The sequence of leptin cDNA prepared in the present study wa identical to the previously reported one. Transformation of E. coli(DH5a) cells with the leptin cDNA-inserted translation vector, pGEX-4T-3-leptin followed by treatment with IPTG (0.1mM) resulted in the expression of a large amount of GST-leptin fusion protein with a molecular weight of 44 KDa as an inclusion body. Denaturation of the insoluble fusion protein by 8M urea, 6M guanidium-HCI or 0.1% 2-mercaptoethanol followed by a slow oxidation could not solubilize the inclusion body. The cell extract was subjected to SDS-PAGE and GST-leptin protein electroeluted from the gel was then injected into a rabbit subcutaneously for the immunization. Anti-GST-leptin rabbit antiserum which had a cross reactivity to the GST-leptin protein was generated. Leptin protein expressed in mouse brain and fat tissues was detected by Western blot immunodetection system using the antiserum generated in the present study.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.91-97
• /
• 2014

In this paper, we propose weighted detection probability with distance between primary user and secondary users by using cooperative spectrum sensing based on energy detection. And we analysis and simulate the result. We suggest different distance between primary user and secondary users and the wireless channel between primary user and secondary users is modeled as Gaussian channel. From the simulation results of the cooperative spectrum sensing with weighted method make coverage bigger compared with non-weight, and We show higher sensing efficiency when we put weight detection probability than before method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.7
• /
• pp.711-717
• /
• 2013

Titanium (Ti) metal and its alloys are desirable materials for ship hulls and other structures because of their high strength, light weight and corrosion-resistance. And light weight and corrosion-resistant aluminum (Al) is the ideal metal for shipbuilding. The joining of Ti and Al dissimilar metals is one of the effective measures to reduce weight of the structures or to save rare metals. Ti and Al have great differences in materials properties, and intermetallic compounds such as Ti3Al, TiAl, TiAl3 are easily formed at the contacting surface between Ti and Al. Thus, welding or joining of Ti and Al is considered to be extremely difficult. However, it was clarified that ultra-high speed welding could suppress the formation of intermetallic compounds in the previous study. Results of tensile shear strength increases with an increase in the welding speed, and therefore extremely high welding speed (50m/min in this study) is good to dissimilar weldability for Ti and Al. In this study, therefore, full penetration dissimilar lap welding of Ti (upper) - Al (lower) and Al (upper) - Ti (lower) with single-mode fiber laser was tried at ultra-high welding speed, and the microstructure of the interface zones in the dissimilar Al and Ti weld beads was investigated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.2
• /
• pp.133-139
• /
• 2014

Titanium (Ti) metal and its alloys are desirable materials for ship hulls and other ocean structures because of their high strength, corrosion-resistance and light weight properties. And light weight and corrosion-resistant aluminum (Al) is the ideal metal for shipbuilding. The joining of Ti and Al dissimilar metals is one of the effective methode to reduce weight of the structures. Ti and Al have great differences in materials properties, and intermetallic compounds such as $Ti_3Al$, TiAl, $TiAl_3$ are easily formed at the contacting surface between Ti and Al. Thus, dissimilar welding and joining of Ti and Al are considered to be very difficult. However, it was clarified that ultra-high speed welding could suppress the formation of intermetallic compounds in the previous study. Results of tensile shear strength increases with an increase in the welding speed, and therefore extremely high welding speed (50 m/min) is good to dissimilar weldability for Ti and Al. In this study, therefore, full penetration dissimilar lap welding of Ti (upper) - Al (lower) and Al (upper) - Ti (lower) with single-mode fiber laser was tried at ultra-high welding speed, and the microstructure of the interface zones in the dissimilar Al and Ti weld beads was investigated.

• Elastomers and Composites
• /
• v.51 no.3
• /
• pp.188-194
• /
• 2016

In this study, novel quaternary plastomers consisting of ethylene, 1-hexene, high ${\alpha}$-olefin, and divinylbenzene were prepared using Zr metallocene catalyst, borate type cocatalyst, and tri-isobutylaluminium. The molar ratio changes of 1-hexene and high ${\alpha}$-olefin (1-octene, 1-decene, and 1-dodecene) had an effect on the properties of the quaternary plastomers. The structure of the quaternary plastomers was characterized using $^1H$ NMR. Molecular weight properties, crystallinity, and thermal properties of the plastomers were determined by GPC, WAXS, and DMA, respectively. Compared with the terpolymers prepared in our previous study, molecular weight and molecular weight distribution of the quaternary polymers were very similar, whereas glass transition temperature ($T_g$) was very low. Also, hardness and tensile properties of the quaternary plastomers were measured.