• 제목/요약/키워드: Furfural removal

검색결과 10건 처리시간 0.022초

Breakthrough modeling of furfural sorption behavior in a bagasse fly ash packed bed

  • Singh, Saurabh;Srivastava, Vimal Chandra;Goyal, Akash;Mall, Indra Deo
    • Environmental Engineering Research
    • /
    • 제25권1호
    • /
    • pp.104-113
    • /
    • 2020
  • Adsorptive breakthrough modelling is essential for design of a sorption packed bed. In this work, breakthrough modelling of the furfural uptake in bagasse fly ash (BFA) packed bed has been performed. Effect of various parameters like bed height (Z = 15-60 cm), flow rate (Q = 0.02-0.04 L/min) and initial furfural concentration (Co = 50-200 mg/L) on the breakthrough curve of furfural sorption in a BFA packed bed have been studied. Enhanced breakthrough performance was observed for the higher value of Z, and lower values of Co and Q. For Co = 100 mg/L, packed bed operated at Q = 0.03 L/min and Z = 60 cm was found to have lowest adsorbent utilization rate of 5.61 g/L with highest breakthrough volume of 14.67 L. Bed depth service time and Thomas models well represented the experimental data points under all experimental conditions. It can be concluded that BFA can be utilized efficiently in continuous system for the removal of furfural. Overall, more than 99% of furfural was adsorbed in BFA packed bed at experimental conditions.

목탄 처리에 의한 당화액 내 5-hydroxymethylfurfural 및 푸르푸랄 제거 (Removal of 5-hydroxymethylfurfural and Furfural in Sugar Hydrolysate by Wood Charcoal Treatment)

  • 정한섭;김용식;이재정;채광석;안병준;이수민
    • Journal of the Korean Wood Science and Technology
    • /
    • 제44권5호
    • /
    • pp.705-715
    • /
    • 2016
  • 본 연구에서는 목질계 바이오매스의 초임계수 처리 후 얻어진 당화액 내 발효저해물질인 퓨란계 화합물(5-hydroxymethylfurfural (5-HMF), 푸르푸랄)을 제거하기 위한 목탄 처리의 효과를 구명하고자 하였으며, 이를 위해 유사 당화액을 제조하고 목탄 투입량 및 처리 시간에 따른 당 및 퓨란계 화합물의 제거율을 계산해 활성탄의 경우와 비교분석하였다. 글루코오스, 자일로오스, 5-HMF, 푸르푸랄이 포함된 유사 당화액에 목탄 또는 활성탄을 0.5, 1, 2, 4, 8, 12% (w/v) 농도로 투입하여 1, 3, 6, 12, 24시간 동안 처리하였다. 처리 결과, 목탄 투입량 및 처리 시간이 증가함에 따라 5-HMF 및 푸르푸랄 제거율이 점차 증가하여 목탄 투입량 8%, 처리 시간 3시간 이상에서는 5-HMF, 푸르푸랄 모두 95% 이상 제거되었으며, 동시에 당의 손실(< 2%)은 거의 없었다. 반면, 활성탄을 처리하였을 경우, 목탄보다 온화한 조건(활성탄 투입량: 8%, 처리 시간: 1시간)에서도 5-HMF 및 푸르푸랄 제거율이 95% 이상이었으나, 글루코오스 및 자일로오스 또한 각각 10% 이상이 제거되었다. 따라서, 결론적으로 당 생산 및 추가적인 당 활용 공정을 고려할 때, 목탄을 이용하는 것이 상대적으로 당화액의 퓨란계 화합물을 효과적으로 제거하고 당 수율을 유지하는 방법으로 판단된다.

알코올모델용액을 이용한 여러 종류 활성탄의 휘발성화합물 흡착특성 (Characteristics of Volatile Compound Adsorption from Alcoholic Model Solution onto Various Activated Carbons)

  • 박승국;이명수;김병호;김대옥
    • 산업식품공학
    • /
    • 제14권3호
    • /
    • pp.249-255
    • /
    • 2010
  • 4가지 서로 다른 소재(대나무, 목재, 피탄, 석탄)로 제조된 10가지 활성탄에 대해서, 30% 알코올모델용액에 용해되어 있는 6가지 휘발성화합물(isoamyl alcohol, hexanal, furfural, ethyl lactate, ethyl octanoate, 2-phenyl ethanol)의 흡착효율을 평가하였다. 이들 6가지 휘발성화합물은 알코올음료에서 종종 발견되며, 농도가 높을 경우에는 숙취의 원인이 될 뿐만이 아니라 위스키나 보드카와 같은 술에서 이취의 원인물질이 되기도 한다. 6가지 휘발성화합물이 용해되어 있는 30% 알코올모델용액 200 mL에 0.2 g의 활성탄을 넣고 16시간 일정한 속도로 교반한 후에 처리된 용액을 2가지 시료처리방법(direct liquid injection and headspace-solid phase microextraction)을 이용 GC분석을 수행하여 활성탄의 제거효율을 구하였다. 활성탄의 제거효율은 휘발성화합물의 종류와 활성탄제조의 소재에 따라 차이가 있었으며, ethy octanoate, 2-phenyl ethanol, hexanal에 대한 제거율은 34-100%로 높은 편이나, isoamyl alcohol, ethyl lactate, furfural의 제거율은 5-13%로 비교적 낮은 편이었다. 활성탄의 종류에 따른 제거율은 대나무활성탄인 A가 isoamly alcohol, hexanal, ethyl lactate, furfural 등 대부분의 휘발성화합물에 대해서 유의적으로 높았으며(p < 0.05), 특히 알코올음료에서 숙취와 이취물질이며 fusel oil의 주성분인 isoamyl alcohol, aldehydes(hexanal, furfural), 2-phenyl ethanol에 대한 흡착효율이 높은 것으로 확인되었다.

절연지에 의한 전력용변압기 열화진단 기술 (Diagnostic techniques of aging deterioration of power transformer by insulating paper)

  • 박현주;남창현;윤여찬
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
    • /
    • pp.449-452
    • /
    • 2004
  • The life of power transformer is basically dependent on the aging deterioration of insulating paper. Analysis of insulating paper for its DP value or tensile strength requires removal of a few strips of paper but direct measurement of this properties is not practical for in-service transformers. For this reason furfural analysis by HPLC has gained increasing favor as a means of estimating degradation of insulating papers in power transformers and this paper reports on the analysis of data on the concentration of furfural in oil samples from about 50 power transformers and the case study. The data showed that furfural content can estimate more accurately aging characteristics compared to concentration of CO, $CO_2$. We expect that these results can be useful to predict the aging characteristics and life diagnosis of power transformers and further the study must be continued.

  • PDF

한천의 산 당화에 의한 Furan화합물의 생성 및 제거 (Formation of Furans during the Acid Hydrolysis of Agar and Their Removal by Treatments of Lime, Steam-stripping and Hydrophobic Resins)

  • 김나현;이재원;서영범;윤민호
    • 농업과학연구
    • /
    • 제36권2호
    • /
    • pp.225-232
    • /
    • 2009
  • The ratio of saccharification and formation of furans during the acid hydrolysis of agar with oxalic acid and sulfuric acid were examined base on the contents of the agar and acids. The ratio of saccharification in oxalic acid appeared to be 51~59% somewhat higher than 49~61% of sulfuric acid. Formation of the furans during the acid hydrolysis increased proportional to the contents of agar and acid. The relative formation ratio was high 10~47% for furfural (FUR) and 15~29% for hydroxy-methyl furfural (HMF) in 0.5~1.25% sulfuric acid rather than those of oxalic acid. When comparing the removal efficiency of the furans using an alkali treatment, steam stripping and hydrophobic resins, FUR was eliminated 60% by the alkali treatment, 62~90% by steam stripping and 71~75% by Amberlite XAD4 and 7HP, while HMF was removed to low levels of 10.5%, 4~17% and 13~25%, respectively. The loss of reducing sugar was also observed in process of the removal of furans, and the loss rate was the level of 2~4% in alkali treatment, 11~16% in steam stripping and 7~9% in Amberlite resins.

  • PDF

목질계 바이오매스 가수분해물 중 발효저해 물질에 대한 생물학적 및 물리화학적 무독화 방법의 평가 (Evaluation of Biological and Physico-chemical Detoxification Methods for the Removal of Inhibitors in Lignocellulose Hydrolysate)

  • 조대행;김용환
    • KSBB Journal
    • /
    • 제24권5호
    • /
    • pp.415-419
    • /
    • 2009
  • 본 연구에서는 리그노셀룰로스 가수분해물과 유사한 조성을 갖는 합성 용액을 이용하여 무독화 실험을 진행하였다. 생물학적 무독화 방법으로는 peroxidase와 laccase와 같은 효소를 이용하였고, 이온교환과 흡착과 같은 물리화학적 방법으로는 이온교환수지와 활성탄을 이용하였다. 효소 중 peroxidase는 페놀계 화합물의 제거에 탁월한 효율을 보였으며, 5-HMF와 furfural은 활성탄에 의해 거의 모두 제거되었고, 아세트산은 음이온교환수지를 사용하는 것이 가장 효율적이었다. 활성탄과 이온교환수지는 다소간의 당손실을 일으켰다. 무독화 방법은 당화액에 포함되어 있는 저해물질의 조성을 고려하여 결정되어야 한다.

유기인산계 추출제를 이용한 에멀젼형 액막법에 의해 푸란유도체를 함유하는 모사 바이오매스 가수분해액으로부터 초산의 분리 (Separation of Acetic Acid from Simulated Biomass Hydrolysates Containing Furans by Emulsion Liquid Membranes with an Organophosphorous Extractant)

  • 이상철
    • Korean Chemical Engineering Research
    • /
    • 제56권5호
    • /
    • pp.687-693
    • /
    • 2018
  • 바이오매스 가수분해액으로부터 당을 정제하는 동안 발효 저해물질들의 선택적인 제거 및 회수는 목질계 바이오매스로부터 바이오 알코올을 생성하는 전체 공정의 경제적 효율성을 높일 수 있다. 이 연구에서는 에멀젼형 액막계에서 페놀화합물이 없는 모사 바이오매스 가수분해액에 있는 푸란유도체가 초산 추출에 미치는 영향이 조사되었다. 특별한 조작 조건하에서 5분내에 99%이상의 초산을 추출할 수 있었으며, 이 때 푸르푸랄과 5-hydroxymethylfurfural의 추출율은 각각 10%와 4% 내외의 값을 가졌다. 또한, 원료상에 있는 푸란유도체들의 초기 농도가 높을수록 초산의 추출속도는 낮았는데, 푸르푸랄이 5-hydroxymethylfurfural 보다 그 영향이 더 컸다. 따라서, 초산 추출 전에 가수분해액으로부터 푸르푸랄을 우선적으로 제거한다면 에멀젼형 액막법이 보다 경제성이 있는 초산 제거법이 될 것으로 보인다.

에탄올 생산 향상을 위한 발효저해물질 제거와 리그닌 유래 발효저해물질이 에탄올 발효에 미치는 영향 (Enhancement of Ethanol Production by The Removal of Fermentation Inhibitors, and Effect of Lignin-derived Inhibitors on Fermentation)

  • 엄민;신경진;이재원
    • Journal of the Korean Wood Science and Technology
    • /
    • 제44권3호
    • /
    • pp.389-397
    • /
    • 2016
  • 본 연구에서는 옥살산 전처리 바이오매스의 액상가수분해산물에 포함된 발효저해물질을 전기투석과 XAD 수지 처리하여 제거한 후 에탄올을 생산하였다. 전기투석 과정에서 아세트산은 대부분 제거되었으며(95.6%), 비이온성 발효저해물질(Total phenolic compound: TPC, 5-hydroxymethyl furfural: HMF, furfural)은 XAD 수지 처리에 의해 효과적으로 제거되었다. 전기투석과 XAD 수지 처리된 액상가수분해산물로 발효를 수행한 결과 XAD 수지의 침지시간이 짧을수록 에탄올 생산이 향상되었다. 최대 에탄올 생산은 발효 72시간 후 $6.16g/{\ell}$로 전기투석 후 액상가수분해산물을 XAD-4 수지에서 5분 침지하였을 때 나타났다. 리그닌 유래 발효저해물질 중 syringaldehyde는 저농도(1 mM, 2 mM)에서 에탄올 생산을 향상시켰으며 5 mM에서는 발효에 부정적인 영향을 주었다. 리그닌 유래 발효저해물질의 시너지 효과를 확인하고자 합성배지로 발효를 수행하였으며, Syringaldehyde (1 mM)와 ferulic acid (1 mM) 합성배지를 이용하여 발효를 수행한 결과 syringaldehyde보다 ferulic acid의 영향으로 에탄올 생산이 감소했다.

바이오에탄올 생산을 위한 농산부산물(유채짚)의 묽은 산 전처리 공정 최적화 (Optimization of Dilute Acid Pretreatment of Rapeseed straw for the Bioethanol Production)

  • 정태수;원경연;오경근
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 추계학술대회 논문집
    • /
    • pp.67-70
    • /
    • 2008
  • Biological conversion of biomass into fuels and chemicals requires hydrolysis of the polysaccharide fraction into monomeric sugars. Hydrolysis can be performed enzymatically, and with dilute or concentrate mineral acids. In this study, dilute sulfuric acid used as a catalyst for the hydrolysis of rapeseed straw. The purpose of this study is to optimize the hydrolysis process in a 15ml bomb tube reactor and investigate the effects of the acid concentration, temperature and reaction time on the hemicellulose removal and consequently on the production of sugars (xylose, glucose and arabinose) as well as on the formation of by-products (furfural, 5-hydroxymethylfurfural and acetic acid). Statistical analysis was based on a model composition corresponding to a $3^3$ orthogonal factorial design and employed the response surface methodology (RSM) to optimize the hydrolysis conditions, aiming to attain maximum xylose extraction from hemicellulose of rapeseed straw. The obtained optimum conditions were: acid concentration of 0.77%, temperature of $164^{\circ}C$ with a reaction time of 18min. Under these conditions, 75.94% of the total xylose was removed and the hydrolysate contained 0.65g $L^{-1}$ Glucose, 0.36g $L^{-1}$ Arabinose, 3.59g $L^{-1}$ Xylose, 0.51g $L^{-1}$ Furfural, 1.36g $L^{-1}$ Acetic acid, and 0.08g $L^{-1}$ 5-hydroxymethylfurfural.

  • PDF

모사 헤미셀룰로오스 가수분해액으로부터 발효 저해물질의 제거를 위해 에멀젼형 액막법의 적용 (Application of Emulsion Liquid Membrane to Removal of Fermentation Inhibitors from Simulated Hemicellulosic Hydrolysates)

  • 이상철
    • Korean Chemical Engineering Research
    • /
    • 제53권4호
    • /
    • pp.457-462
    • /
    • 2015
  • 헤미셀룰로오스 가수분해액은 당은 물론 카르복시산, 푸란유도체 및 페놀화합물과 같은 여러 종류의 에탄올 발효 저해물질을 포함한다. 본 연구에서는 이런 저해물질들을 제거할 수 있는 분리 기술로서 에멀젼형 액막법이 적용되었다. 기본 모사 헤미셀룰로오스 가수분해액은 당인 자일로스, 용매인 묽은 황산 수용액과 카르복시산인 초산으로 구성되었으며, 필요에 따라 푸란유도체인 푸르푸랄 또는 페놀화합물인 p-hydroxybenzoic acid(HBA)가 그 가수분해액에 추가되었다. 본 연구에서 고려된 모든 에멀젼형 액막계에서 약산인 초산과 HBA는 선택적으로 제거가 가능하였지만, 알데히드인 푸르푸랄은 상당히 제거하기가 어려웠다. 또한, 기본 모사 가수분해액에 HBA가 추가된 에멀젼형 액막계에서 추출제로 tributyl phosphate를 사용하여 원료상에 있는 초산과 HBA를 99%까지 동시에 선택적으로 제거할 수 있었다.