• Wind and Structures
• /
• v.31 no.2
• /
• pp.143-152
• /
• 2020

The wind design of buildings is typically based on strength provisions under ultimate loads. This is unlike the ductility-based approach used in seismic design, which allows inelastic actions to take place in the structure under extreme seismic events. This research investigates the application of a similar concept in wind engineering. In seismic design, the elastic forces resulting from an extreme event of high return period are reduced by a load reduction factor chosen by the designer and accordingly a certain ductility capacity needs to be achieved by the structure. Two reasons have triggered the investigation of this ductility-based concept under wind loads. Firstly, there is a trend in the design codes to increase the return period used in wind design approaching the large return period used in seismic design. Secondly, the structure always possesses a certain level of ductility that the wind design does not benefit from. Many technical issues arise when applying a ductility-based approach under wind loads. The use of reduced design loads will lead to the design of a more flexible structure with larger natural periods. While this might be beneficial for seismic response, it is not necessarily the case for the wind response, where increasing the flexibility is expected to increase the fluctuating response. This particular issue is examined by considering a case study of a sixty-five-story high-rise building previously tested at the Boundary Layer Wind Tunnel Laboratory at the University of Western Ontario using a pressure model. A three-dimensional finite element model is developed for the building. The wind pressures from the tested rigid model are applied to the finite element model and a time history dynamic analysis is conducted. The time history variation of the straining actions on various structure elements of the building are evaluated and decomposed into mean, background and fluctuating components. A reduction factor is applied to the fluctuating components and a modified time history response of the straining actions is calculated. The building components are redesigned under this set of reduced straining actions and its fundamental period is then evaluated. A new set of loads is calculated based on the modified period and is compared to the set of loads associated with the original structure. This is followed by non-linear static pushover analysis conducted individually on each shear wall module after redesigning these walls. The ductility demand of shear walls with reduced cross sections is assessed to justify the application of the load reduction factor "R".

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.6
• /
• pp.353-357
• /
• 2005

Declining auditory performance with advanced age is a well known and common problem that is becoming more Prevalent due to the increasing number of elderly people in our society. We introduce a novel ARCISM (Audiogram Result Computer Input. Save & Management software) data management program which enables the assessment of the risk of past history of hearing impairment on the basis of known risk factors. This study investigates the reference levels of pure tone hearing threshold of normal aging in Korean and the difference between fenders. The subjects were carefully selected by questionnaire and absence of any history of otologic infection, noise exposure. and ototoxic drug among 1603 subjects. who visited Health Promotion Center in Daegu Fatima Hospital for one year. The results show (1) hearing sensitivity declines with age. (2) higher frequency shows steeper slope of hearing declines than lower frequency. and (3) there were more hearing loss at 4 and 8 kHz in men than in women. Due to the ARCISM program. it was possible to manage huge data of hearing results and to obtain the reference level of a9e-related hearing declines. Furthermore, we expect that the results of this study can be the fundamental data for hearing rehabilitation for the elderly and for developing suitable hearing aids for Korean.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.331-337
• /
• 2016

Radial collector wells (RCWs) have been managed by Korea Rural Community Corporation (KRC) since 1983, installing 98 wells for agriculture in rural area over the country. Among them, 20 wells were installed upstream of 5 subsurface dams and the remaining were installed regardless of the subsurface dam. Most of RCWs have been developed in 1980s and 1990s, and 83 wells have been passed more than 20 years after construction. The number of horizontal arms for RCWs varies from 9 to 28, with length and diameter being 10~30 m and 65 mm, respectively. The central caisson with an inner diameter of 3.5 m was commonly constructed to a depth of 10 m. The maximum pumping rates in RCWs, which are located at distances of 10 to 1,200 m from the river, are 2,000~10,000 m³/day. RCW has a fundamental problem that reduced pumping capacity and degraded well efficiency, due to the physical and chemical clogging. From the feasibility test for improving RCW performance, specific capacity increased to 67% after rehabilitation. TV logging for RCW horizontal arm shows that near the caisson is more severe clogging. From the results of this study, KRC has established the guidebook for monitoring and improving well efficiency through physical/chemical treatment, well logging, and hydraulic tests and managed RCWs periodically with its rehabilitation methods.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.574-575
• /
• 1996

The theme of the current study is to study intonation of Taiwanese(Tw.) by comparing the intonation patterns in native language (Ll), target language (L2), and interlanguage (IL). Studies on interlanguage have dealt primarily with segments. Though there were studies which addressed to the issues of interlanguage intonation, more often than not, they didn't offer evidence for the statement, and the hypotheses were mainly based on impression. Therefore, a formal description of interlanguage intonation is necessary for further development in this field. The basic assumption of this study is that native speakers of one language perceive and produce a second language in ways closely related to the patterns of their first language. Several studies on interlanguage prosody have suggested that prosodic structure and rules are more subject to transfer than certain other phonological phenomena, given their abstract structural nature and generality(Vogel 1991). Broselow(1988) also shows that interlanguage may provide evidence for particular analyses of the native language grammar, which may not be available from the study of the native language alone. Several research questions will be addressed in the current study: A. How does duration vary among native and nominative utterances\ulcorner The results shows that there is a significant difference in duration between the beginning English learners, and the native speakers of American English for all the eleven English sentences. The mean duration shows that the beginning English learners take almost twice as much time (1.70sec.), as Americans (O.97sec.) to produce English sentences. The results also show that American speakers take significant longer time to speak all ten Taiwanese utterances. The mean duration shows that Americans take almost twice as much time (2.24sec.) as adult Taiwanese (1.14sec.) to produce Taiwanese sentences. B. Does proficiency level influence the performance of interlanguage intonation\ulcorner Can native intonation patterns be achieved by a non-native speaker\ulcorner Wenk(1986) considers proficiency level might be a variable which related to the extent of Ll influence. His study showed that beginners do transfer rhythmic features of the Ll and advanced learners can and do succeed in overcoming mother-tongue influence. The current study shows that proficiency level does play a role in the acquisition of English intonation by Taiwanese speakers. The duration and pitch range of the advanced learners are much closer to those of the native American English speakers than the beginners, but even advanced learners still cannot achieve native-like intonation patterns. C. Do Taiwanese have a narrower pitch range in comparison with American English speakers\ulcorner Ross et. al.(1986) suggests that the presence of tone in a language significantly inhibits the unrestricted manipulation of three acoustical measures of prosody which are involved in producing local pitch changes in the fundamental frequency contour during affective signaling. Will the presence of tone in a language inhibit the ability of speakers to modulate intonation\ulcorner The results do show that Taiwanese have a narrower pitch range in comparison with American English speakers. Both advanced (84Hz) and beginning learners (58Hz) of English show a significant narrower FO range than that of Americans' (112Hz), and the difference is greater between the beginning learners' group and native American English speakers.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.332-347
• /
• 2017

Analysis of the interaction between the automated vehicles and manual vehicles is very important in analyzing the performance of automated cooperative driving environments. In particular, the automated vehicle platooning can affect the driving behavior of adjacent manual vehicles. The purpose of this study is to analyze the lane change behavior of the manual vehicles in automated vehicle platonning environment and to conduct the experiment and questionnaire surveys in three stages. In the first stage, a video questionnaire survey was conducted, and responsive behaviors of manual vehicles were investigated. In second stage, the driving simulator experiments were conducted to investigate the lane change behaviors of in automated vehicle platonning environments. To analyze the lane change behavior of the manual vehicles, lane change durations and acceleration noise, which are indicators of traffic flow stability, were used. The driving behavior of manual vehicles were compared across different market penetration rates (MPR) of automated vehicles and human factors. Lastly, NASA-TLX (NASA Task Load Index) was used to evaluate the workload of the manual vehicle drivers. As a result of the analysis, it was identified that manual vehicle drivers had psychological burdens while driving in automated vehicle platonning environments. Lane change durations were longer when the MPR of the automated vehicles increased, and acceleration noise were increased in the case of 30-40 years old or female drivers. The results from this study can be used as a fundamental for more realistic traffic simulations reflecting the interaction between the automated vehicles and manual vehicles. It is also expected to effectively support the establishment of valuable transportation management strategy in automated vehicle environments.

• Journal of the Korean Society of School Health
• /
• v.10 no.1
• /
• pp.41-50
• /
• 1997

The purpose of this study is to provide fundamental data supporting facilitation of a formal health education performed by school nurses as health educators. To evaluate the teacher expertise of school nurses as health educators, this study analyzed the present status of health education and the recognition of self-confidence in teaching ability of school nurses. Self addressing questionnaire were mailed out to 340 secondary school nurses in Seoul and out of them 244 nurses (71.8%) responded to the survey. Analysis of the data was made using t-test and ANOVA in SAS program. The major results are as follows : 1. The total health instruction performance rate was 84.6% (204). Regular health instruction was carried out by 66 nurses and the rest of the 155 subjects gave irregular instruction on health education. 2. Regular health education classes was offered as a part of physical education class hour by 89.4% of the respondents whereas only 10.6% of them had formal health education classes. The survey showed that irregular health education classes were mainly held in physical education class hours (70.3%) and 14.8% had opportunities for additional classes on health education. 3. The average class for regular health education was 5 hours per week but for irregular health education classes were only one hour per semester (32.9%). 4. Among the 11 categories of health education, education on drug abuse and body structure and function and physical development occupied 95.6%, 69.6% respectably while physical training, family health, social health occupied 10.8%, 12.7%. 5. Health education was given much more at public schools (88.2%) than at private schools. 6. 232 (95.0%) school nurses agreed with the necessity of formalizing health education classes and 227 (93.1%) wanted to change their status from school nurses to formal health teachers. 7. There is a tendency to change the status from school nurse to formal health teacher, and the necessity of having a formal curriculum on health education while less recognized by the older and longer-careered nurses was more recognized by those nurses with higher education. 8. The lack of administrative support (79.5%), work burden (77.9%), and lack of teaching competency (22.1%) were the greatest problems. 9. Education on drug abuse was stressed the most whereas physical training was most neglected. 10. There is a tendency that older and longer-careered school nurses thought less positively of their status, and then 98 (81.1%) school nurses acknowledged themselves as professional teachers. 11. 176 (72.5%) school nurses agreed with the necessity of continuing education : health knowledge and teaching skills for formal health teachers. 12. 179 (73.8%) school nurses had a positive attitude and undergraduate preparation and the practice of professional health teachers. 13. The school nurses had self-confidence in their teaching competence, teaching strategies and knowledge in all 11 health education areas.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1037-1044
• /
• 2010

In this paper, a new size-reduced, wideband ring-hybrid coupler is presented, and a design of a planar single-balanced doubler using the ring-hybrid is shown. This ring-hybrid coupler employs a pair of ultra-wideband transitions for phase inversion, which consists of in-phase and out of-phase transitions providing a good amplitude and phase balances for wide frequency ranges. The implemented ring-hybrid is 65 % smaller than conventional ring-hybrids, and provides 92.5 % and 81.3 % bandwidth at $\sum$ and $\Delta$ ports, respectively. Thanks to good amplitude and phase balances over wide bandwidth, the ring-hybrid can be applied to implement various balanced components. The implemented single-balanced doubler utilizing the ring-hybrid exhibits typical conversion loss of 10.5 dB for the output frequency range of 4~12 GHz with fundamental suppression level of 30 dB. The performance was also well-predicted with the nonlinear circuit simulation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.5
• /
• pp.1025-1037
• /
• 2015

Flexible base isolation bearings that separate superstructure from ground have been widely used in the construction field because they make a significant contribution to increasing the fundamental period of the structure, thereby decreasing response acceleration transmitted into the superstructure. However, the established bearing devices installed to uphold the whole building give rise to some problems involved with failure and collapse due to lack of the capacity as modern structures are getting more massive and higher. Therefore, this study suggests new isolation bearings assembled with additional restrainers enabled to reinforcing and recentering, and then evaluates their performance to withstand the seismic load. The superelastic shape memory alloy (SMA) bars are installed into the conventional lead-rubber bearing (LRB) devices in order to provide recentering forces. These new systems are modeled as component spring models for the purpose of conducting nonlinear dynamic analyses with near fault ground motion data. The LRB devices with steel bars are also designed and analyzed to compare their responses with those of new systems. After numerical analyses, ultimate strength, maximum displacement, permanent deformation, and recentering ratio are compared to each model with an aim to investigate which base isolation models are superior. It can be shown that LRB models with superelastic SMA bars are superior to other models compared to each other in terms of seismic resistance and recentering effect.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.337-344
• /
• 2017

The demand of liquified natural gas is increasing due to environmental issues. This reason has resulted in increasing the capacity of liquified natural gas cargo tank. The Mark-III type primary barrier directly contacts liquified natural gas. Also, the primary barrier is under various loading conditions such as weight of liquified natural gas and sloshing loads. During a ship operation, various loads can cause fatigue failure. Therefore, the fatigue life prediction should be evaluated to prevent leakage of liquified natural gas. In the present study, the fatigue analysis of insulation system including primary barrier is performed using a finite element model. The fatigue life of primary barrier is carried out using a numerical study. The value of principle stress and the location of maximum principle stress range are calculated, and the fatigue life is evaluated. In addition, the effects on the insulation panel status and the arrangement of knot or corrugation are analyzed by comparing the fatigue life of various models. The insulation system which has best structural performance of primary barrier was selected to ensure structural integrity in fatigue assessment. These results can be used as a design guideline and a fundamental study for the fatigue assessment of primary barrier.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.5
• /
• pp.515-528
• /
• 2020

Underground concrete structures are usually designed to be used for decades, but in recent years, many of them are nearing their original life expectancy. As a result, it is necessary to promptly inspect and repair the structure, since it can cause lost of fundamental functions and bring unexpected problems. Therefore, personnel-based inspections and repairs have been underway for maintenance of underground structures, but nowadays, objective inspection technologies have been actively developed through the fusion of deep learning and image process. In particular, various researches have been conducted on developing a concrete crack detection algorithm based on supervised learning. Most of these studies requires a large amount of image data, especially, label images. In order to secure those images, it takes a lot of time and labor in reality. To resolve this problem, we introduce a method to increase the accuracy of crack area detection, improved by 0.25% on average by applying adversarial learning in this paper. The adversarial learning consists of a segmentation neural network and a discriminator neural network, and it is an algorithm that improves recognition performance by generating a virtual label image in a competitive structure. In this study, an efficient deep neural network learning method was proposed using this method, and it is expected to be used for accurate crack detection in the future.