• 한국항공우주학회지
• /
• 제34권1호
• /
• pp.65-73
• /
• 2006

무인항공기는 엔진에서 연료의 연소, 배기관에서 고온의 연소 배기 가스등으로 인하여 많은 부분에 고온이 발생한다. 이는 전체 구조물의 안정성에 심각한 영향을 미칠 수 있는 사항이다. 경사기능재료는 고온의 환경에서 열에 저항하기 위해 한쪽 재료는 세라믹으로, 다른 쪽 재료는 가볍고 구조적 강성을 지닌 금속재료로 점차적으로 변화된 재료를 사용한 일종의 복합재료이다. 경사기능재료는 뛰어난 내열성을 가지는 특성으로 고온 상태에서 많이 사용된다. 이에 따라 본 논문에서는 경사기능재료를 무인항공기의 엔진 배기 덕트에 적용하여 열적 거동을 고찰하였고, 경사기능 층이 20개, 40개, 60개, 80개, 100개인 경사기능재료를 덕트 구조물에 적용하여 각각의 열 및 열응력 해석을 수행하여 비교 분석하였다. 또한, 경사기능재료를 사용한 고온 내열 배기 덕트의 크리프 해석을 수행하여 그 특성에 대해 고찰하였다.

• 대한기계학회논문집A
• /
• 제21권10호
• /
• pp.1571-1579
• /
• 1997

The development of a new material which should be continuously use under severe environment of very high temperature has been urgently requested. For the development of such super-heat resistant materials, the main problem is not only to make the superior thermal barrier properties but also to actively release thermal stress. So, a new concept of functionally graded material(FGM) has been proposed to overcome this problem. A composition and microstructure of FGM are varied continuously from place to place in ways designed to provide it with the maximum function of mitigating the induced thermal stress. So, FGM can be applied in the aerospace, the electronic and the medical field, etc.. In this study, thermal stress analysis of sintering PSZ/NiCrAlY graded material was conducted theoretically using a finite-element program. The temperature condition was sintering temperature assuming a cooling-down process up to room temperature. Fracture damage mechanism was anlayzed by the parameters of residual stress. It could be known that FGM provided with the function of mitigating the induced thermal stress.

• 한국방재학회 논문집
• /
• 제7권5호
• /
• pp.47-60
• /
• 2007

본 논문에서는 전단변형률과 회전관성을 고려한 준적합 쉘 요소를 이용한 점진기능재료 판과 쉘의 고유진동수와 좌굴하중을 연구하였다. S 형상 함수를 이용한 세라믹과 금속의체적요소의 변화에 따른 점진기능재료 판과 쉘의 고유치 문제를 연구하였다. 점진기능재료 쉘 요소의 면내 강성, 휨 강성 및 전단 강성의 수식은 등질 요소보다 복잡한 재료의 성질들로 결합되어 있다. 유한요소의 수치적 결과를 검정하기 위해 1차 전단변형 이론에 의한 직사각형 판의 Wavier해를 제시하였다. 적층복합 구조 및 S 형상 점진기능재료 구조의 수치해석해는 Navier의 해로 검증하였으며, S 형상 점진기능재료 구조물의 다양한 예제를 제시하였다. 해석결과는 Navier의 이론해와 아주 잘 일치함을 알 수 있었다.

• 한국전기전자재료학회논문지
• /
• 제28권10호
• /
• pp.630-635
• /
• 2015

A vacuum Interrupter (VI), a core part that composes the breaking part of medium-voltage vacuum circuit breaker (VCB), has the excellent insulation performance and arc-extinguishing capability. $SF_6$ gas had been used for the external insulation of VIs since the dielectric strength of $SF_6$ gas is superior to that of other insulation gases. However, because of environmental problems related with global warming, a solid-insulated technology was recently researched. The functionally graded material (FGM), as changing spatially the distribution of the relative permittivity inside an insulator, can reduce the electric field stress at the specific region. Especially, the external insulation performance of the VI with the molded FGM insulator is greatly improved as compared with that of the existing VI or the VI with a new external shield. In this paper, the effectiveness of this FGM insulator is verified by the numerical simulation.

• Composites Research
• /
• 제36권4호
• /
• pp.241-245
• /
• 2023

비철계 합금인 알루미늄과 구리 합금은 전기 및 열전도성이 우수하지만 철계 합금대비 상대적으로 기계적 특성은 낮다. 철계 합금인 스테인레스 스틸은 비철계인 알루미늄과 구리 대비 가공성은 나쁘지만 기계적 특성과 내부식성이 우수하여 고강도 공업용 소재로 사용되고 있다. 본 연구에서는 알루미늄과 구리 그리고 스테인레스 스틸을 융복합화 하여 기능 맞춤형 경사기능재료를 분말프로세스를 이용하여 제조하였다. 제조된 경사기능재료는 구리와 철계 합금 대비 경량의 우수한 표면 경도를 나타내었으며 열전도도 역시 단일 알루미늄과 스테인레스 스틸 소재 보다 높은 값을 나타내었다.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.16-22
• /
• 1998

This paper addresses a method which can be used for analyzing thermal stresses of a functionally graded material(FGM) using semi-analytical approach. FGM is a nonhomogeneous material whose composition is changed continuously from a metal surface to a ceramic surface. An infinite one dimensional FGM plate is considered. The temperature distribution in the FGM is obtained by approximate Green's function solution. To expedite the convergence of the solutions, alternative Green's function solution is derived and shows good agreement with results from finite difference method. Thermal stresses are calculated using temperature distribution of the plate.

• Coupled systems mechanics
• /
• 제13권2호
• /
• pp.171-186
• /
• 2024

In the present paper, thermal buckling characteristics of functionally graded rectangular plates made of porous material that are integrated with surface-bonded piezoelectric actuators subjected to the combined action of thermal load and constant applied actuator voltage are investigated by utilizing a Navier solution method. The uniform temperature rise loading is considered. Thermomechanical material properties of FGM plates are assumed to be temperature independent and supposed to vary through thickness direction of the constituents according to power-law distribution (P-FGM) which is modified to approximate the porous material properties with even and uneven distributions of porosities phases. The governing differential equations of stability for the piezoelectric FGM plate are derived based on higher order shear deformation plate theory. Influences of several important parameters on the critical thermal buckling temperature are investigated and discussed in detail.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2003년도 international symposium on advanced powder metallurgy
• /
• pp.78-79
• /
• 2003

A functionally graded material was produced by laminating green tapes. The lamination resulted in the formation of functionally graded structure and sintering of the materials resulted of FGM. This results demonstrated a possibility of using green tapes in the processing of functionally graded materials.

• Earthquakes and Structures
• /
• 제14권2호
• /
• pp.103-115
• /
• 2018

In this work, a simple but accurate hyperbolic plate theory for the free vibration analysis of functionally graded material (FGM) sandwich plates is developed. The significant feature of this formulation is that, in addition to including the shear deformation effect, it deals with only 3 unknowns as the classical plate theory (CPT), instead of 5 as in the well-known first shear deformation theory (FSDT) and higher-order shear deformation theory (HSDT). A shear correction factor is, therefore, not required. Two common types of FGM sandwich plates are considered, namely, the sandwich with the FGM face sheet and the homogeneous core and the sandwich with the homogeneous face sheet and the FGM core. The equation of motion for the FGM sandwich plates is obtained based on Hamilton's principle. The closed form solutions are obtained by using the Navier technique. The fundamental frequencies are found by solving the eigenvalue problems. Numerical results of the present theory are compared with the CPT, FSDT, order shear deformation theories (HSDTs), and 3D solutions. Verification studies show that the proposed theory is not only accurate and simple in solving the free vibration behaviour of FGM sandwich plates, but also comparable with the higher-order shear deformation theories which contain more number of unknowns.

• Journal of Mechanical Science and Technology
• /
• 제18권9호
• /
• pp.1582-1589
• /
• 2004

The dynamic response of an eccentric Griffith crack in functionally graded piezoelectric ceramic strip under anti-plane shear impact loading is ana lysed using integral transform method. Laplace transform and Fourier transform are used to reduce the problem to two pairs of dual integral equations, which are then expressed to Fredholm integral equations of the second kind. We assume that the properties of the functionally graded piezoelectric material vary continuously along the thickness. The impermeable crack boundary condition is adopted. Numerical values on the dynamic stress intensity factors are presented for the functionally graded piezoelectric material to show the dependence of the gradient of material properties and electric loadings.