• 전자공학회논문지C
• /
• 제34C권12호
• /
• pp.9-19
• /
• 1997

This paper describes the design and FPGA implementation of a system control unit within a multiprocessor chip which can be used as a node processor ina massively parallel processing (MPP) caches, memory management units, a bus unit and a system control unit. Major functions of the system control unit are locking/unlocking of the shared variables of protected access, synchronization of instruction execution among four integer untis, control of interrupts, generation control of processor's status, etc. The system control unit was modeled in very high level using verilog HDL. Then, it was simulated and verified in an environment where trap handler and external interrupt controller were added. Functional blocks of the system control unit were changed into RTL(register transfer level) model and synthesized using xilinx FPGA cell library in synopsys tool. The synthesized system control unit was implemented by Xilinx FPGA chip (XC4025EPG299) after timing verification.

• 상하수도학회지
• /
• 제32권6호
• /
• pp.487-497
• /
• 2018

Water quality improvement processes for stagnant area consist mainly of technologies applying vegetation and artificial water circulation, and these existing technologies have some limits to handle pollution loads effectively. To improve the purification efficiency, eco-friendly technologies should be developed that can reinforce self-purification functions. In this study, a multi-functional floating island combined with physical chemical biological functions ((1) flotation and oxidization using microbubbles, (2) vegetation purification and (3) bio-filtration with improved adsorption capacity) has been developed and basic experiments were performed to determine the optimal combination conditions for each unit process. It has been shown that it is desirable to operate the microbubble unit process under conditions greater than $3.5kgf/cm^2$. In vegetation purification unit process, Yellow Iris (Iris pseudacorus) was suggested to be suitable considering water quality, landscape improvement and maintenance. When granular red-mud was applied to the bio-filtration unit process, it was found that T-P removal efficiency was good and its value was also stable for various linear velocity conditions. The appropriate thickness of filter media was suggested between 30 and 45 cm. In this study, the optimal design and operating parameters of the multi-functional floating island have been presented based on the results of the basic experiments of each unit process.

• 한국경영과학회지
• /
• 제32권1호
• /
• pp.27-51
• /
• 2007

We analyze the effects of the sellers' strateiges on the final bid prices in internet auctions. We focus on the following three strategies of the seller adoption of the buy-price, setting the starting bid price, and adoption of 'the effective fixed price' which means that the starting bid price is set near the buy-price. In addition, the number of units sold single-unit or multi-unit, and item characteristics, such as whether the food is a search product (functional product) or an experience product (non-functional product), are also considered. We use real data on bids for 4 items from an online auction site. We find that in an auction for experience products when sold as single units, adopting the buy-price strategy raises the final bid price. We also find that in multi-unit auctions, starting the auction at 'the effective fixed price' raises the final bid price.

• 대한임베디드공학회논문지
• /
• 제16권6호
• /
• pp.267-276
• /
• 2021

The automotive industry and academic research have been continuously conducting research on standardization such as AUTOSAR (AUTomotive Open System ARchitecture) and ISO26262 to solve problems such as safety and efficiency caused by the complexity of electric/electronic architecture of automotive. AUTOSAR is an automotive standard software platform that has a layered structure independent of MCU (Micro Controller Unit) hardware, and improves product reliability through software modularity and reusability. And, ISO26262, an international standard for automotive functional safety and suggests a method to minimize errors in automotive ECU (Electronic Control Unit)s by defining the development process and results for the entire life cycle of automotive electrical/electronic systems. These design methods are variously applied in representative automotive safety-critical systems. However, since the functional and safety requirements are different according to the characteristics of the safety-critical system, it is essential to research the AUTOSAR functional safety design method specialized for each application domain. In this paper, a software functional safety mechanism design method using AUTOSAR is proposed, and a new failure management framework is proposed to ensure the high reliability of the product. The AUTOSAR functional safety mechanism consists of memory partitioning protection, timing monitoring protection, and end-to-end protection. The fault management framework is composed of several safety SWCs to maintain the minimum function and performance even if a fault occurs during the operation of a safety-critical system. Finally, the proposed method is applied to the Shift-by-Wire system design to prove the validity of the proposed method.

• PNF and Movement
• /
• 제18권3호
• /
• pp.305-313
• /
• 2020

Purpose: The aim of this study was to investigate the relationship between a functional evaluation model and the Fugl-Meyer assessment (FMA) scale in evaluating the upper extremities of stroke patients Methods: Thirty-eight stroke patients were evaluated using the FMA and performed reaching and grasping motions using a three-dimensional motion analysis (Qquas 1 series, Qualisys AB, Sweden). The participants sat on a chair with a backrest. The position of the cup was located at a distance of 80% to the front arm length. The markers were attached to the sternum, acromion, elbow lateral epicondyle, ulnar styloid process, three metacarpal heads, and the distal phalanges of the thumb and index finger. The variables of the correlation between the functional evaluation model and the FMA scale were analyzed. Multiple regression (stepwise) was used to investigate the effect of the kinematic variables. Results: A significant negative correlation was found between the movement time (p < 0.05), movement unit (p < 0.05), and trunk displacement values (p < 0.05) in the FMA total scores, while a positive correlation was found between the peak velocity (p < 0.05) and maximum grip aperture values (p < 0.05). As a result of the multiple regression analysis, the most significant factor was the movement unit, followed by the general movement assessment and trunk displacement. The explained FMA total score value was 62%. Conclusion: This study presents a new functional evaluation model for assessing the reaching and grasping ability of stroke patients. The factors of the proposed functional evaluation model showed significant correlations with the FMA scale scores and confirmed that the new functional evaluation model explained the FMA by 67%. This suggests a new functional evaluation model for reaching and grasping stroke patients.

• 전자통신동향분석
• /
• 제34권1호
• /
• pp.123-131
• /
• 2019

Automotive electronics are complex and require high performance with an advanced driver assistant system (ADAS) and a functioning autonomous system. Thus, considering their complexity, the processor of the electronic control unit (ECU) requires a design that ensures high performance and reliability to ensure functional safety. This study discusses the technology used for developing a processor that can ensure functional safety of current automotive electronic systems.

• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.96-105
• /
• 2013

This paper presents a standardization method for designing wire harness systems, based on the control types and functional blocks, for use in commercial vehicles. With a rapid increase in the installation of systems with added new features, it is very important to develop a reliable wire harness design in a short time by standardizing wire harness designs and reusing the standard design. Because the function of a system, particularly, for commercial vehicles, varies significantly on the basis of the requirements, regulations, and options, it is not effective to establish one standard design for one system. In addition, a system with the same function may differ in terms of the input conditions and output loads on the basis of the installed vehicle types, and it is not practical to standardize a harness design targeting an entire system. In this study, the wire harness designs of a system were classified into six categories based on the control types of the system: switch driven, control of a switch, control of an electronic control unit, unit driven, control of a unit, and connector operation. Then, a wire harness design of each system was divided into three blocks according to their functions: the control, drive, and monitoring blocks. The standard wire harness designs were made for each functional block of each control type. The advantage of this proposed method is that an effective and practical design can be obtained, which covers the diversities in the same system for different grades of commercial vehicles with a reduction in the number of wire harness supplements.

• Journal of Acupuncture Research
• /
• 제37권2호
• /
• pp.128-135
• /
• 2020

Background: Classical acupuncture is being used in the treatment of rheumatoid arthritis (RA). To explore the biological response to acupuncture, a network-based analysis was performed on gene expression data collected from an animal model of RA treated with acupuncture. Methods: Gene expression data were obtained from published microarray studies on blood samples from rats with collagen induced arthritis (CIA) and non-CIA rats, both treated with manual acupuncture. The weighted gene co-expression network analysis was performed to identify gene clusters expressed in association with acupuncture treatment time and RA status. Gene ontology and pathway analyses were applied for functional annotation and network visualization. Results: A cluster of 347 genes were identified that differentially downregulated expression in association with acupuncture treatment over time; specifically in rats with CIA with module-RA correlation at 1 hour after acupuncture (-0.27; p < 0.001) and at 34 days after acupuncture (-0.33; p < 0.001). Functional annotation showed highly significant enrichment of porphyrin-containing compound biosynthetic processes (p < 0.001). The network-based analysis also identified a module of 140 genes differentially expressed between CIA and non-CIA in rats (p < 0.001). This cluster of genes was enriched for antigen processing and presentation of exogenous peptide antigen (p < 0.001). Other functional gene clusters previously reported in earlier studies were also observed. Conclusion: The identified gene expression networks and their hub-genes could help with the understanding of mechanisms involved in the pathogenesis of RA, as well understanding the effects of acupuncture treatment of RA.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제23권4호
• /
• pp.366-376
• /
• 2020

Purpose: To assess the association between birth weight and the development of functional gastrointestinal disorders (FGIDs) in the first year of life. Methods: This is a secondary analysis of a prospective cohort multicenter study including neonates, consecutively enrolled at birth, and followed up for one year. At birth all infants were classified by birth weight as extremely low (ELBW), very low, or low when <1,000, <1,500, and <2,500 g, respectively, and by birth weight for gestational age as appropriate (AGA, weight in the 10-90th percentile), small (SGA, weight <10th percentile), and large (LGA, weight >90th percentile) for gestational age. FGIDs were classified according to the Rome III criteria and assessed at 1, 3, 6, and 12 months of life. Results: Among 1,152 newborns enrolled, 934 (81.1%) completed the study: 302 (32.3%) were preterm, 35 (3.7%) were ELBW, 104 (11.1%) were SGA, 782 (83.7%) were AGA, and 48 (5.1%) were LGA infants. Overall, throughout the first year of life, 718 (76.9%) reported at least one FGID. The proportion of infants presenting with at least one FGID was significantly higher in ELBW (97%) compared to LBW (74%) (p=0.01) and in LGA (85.4%) and SGA (85.6%) compared to AGA (75.2%) (p=0.0001). On multivariate analysis, SGA was significantly associated with infantile colic. Conclusion: We observed an increased risk of FGIDs in ELBW, SGA, and LGA neonates. Our results suggest that prenatal factors determining birth weight may influence the development of FGIDs in infants. Understanding the role of all potential risk factors may provide new insights and targeted approaches for FGIDs.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.349-352
• /
• 2000

In this paper, a SIMD 64bit MAC (Multiply -Accumulate) unit is designed. It is composed of two 32bit MAC unit which supports SIMD 16bit operations. As a result, It can process two 32bit MAC operations or four 16bit operations in one cycle. Proposed MAC unit is described in Verilog HDL. After functional verification is performed, MAC unit is synthesized and optimized with 0.35$\mu\textrm{m}$ standard cell library. The synthesis result shows that this MAC unit can operate at 80㎒ of clock frequency in 85$^{\circ}C$, 3.0V, worst case process and 125㎒ of clock frequency at 25$^{\circ}C$, 3.3V, typical case process. It achieves 320Mops of performance, and is suitable for embedded DSP processors.