• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.337-349
• /
• 2008

Despite an improved bone reactions of Mg-incorporated implants in the animals, little yet has been carried out by the experimental investigations in functional loading conditions. This study investigated the clinical and histologic parameters of osseointegrated Mg-incorporated implants in delayed loading conditions. A total of 36 solid screw implants (diameter 3.75 mm, length 10mm) were placed in the mandibles of 6 beagle dogs. Test groups included 18 Mg-incorporated implants. Turned titanium Implants served as control. Gold crowns were inserted 3 months. Radiographic assessments and stabilitytests were performed at the time of fixture installation, $2^{nd}$ stage surgery, 1 and 3 months after loading. Histological observations and morphometrical measurements were also performed. Of 36 implants, 32 displayed no discernible mobility, corresponding to successful clinical function. There was no statistically significant difference between test implants and controls in marginal bone levels (p=0.413) and RFA values. The mean BIC % in the Mg-implants was $54.4{\pm}20.2%$. The mean BIC % in the turned implant was $48.9{\pm}8.0%$. These differences between the Mg-implant and control implant were not statistically significant (P=0.264). In the limitation of this study, bone-to-implant contact (BIC) and bone area of Mg-incorporated oxidized implant were similar to machine-turned implant. The stability analysis showed no significantly different ISQ values and marginal bone loss between two groups. Considering time-dependent bone responses of Mg-implant, it seems that Mg-implants enhanced bone responses in early loading conditions and osseointegrated similarly to cp Ti implants in delayed loading conditions. However, further investigations are necessary to obtain long-term bone response of the Mg-implant in human.

• Journal of Life Science
• /
• v.22 no.12
• /
• pp.1628-1636
• /
• 2012

This study examined the antioxidant activity of the dark purple rice seeds from the rice line, MGI079, derived from insertional mutagenesis. The contents of polyphenolic compounds were 1.3 and 1.9-fold higher in the MGI079-2-1 and MGI079-2-6 rice lines than in the donor cultivar MGI079. Flavonoid contents were 6.4-fold higher in the MGI079-2-1 line. The MGI079-2-1 line showed a 24.4-fold higher activity in DPPH free radical scavenging compared to the MGI079 line. The anthocyanin content of the MGI079-2-6 line was more than 106.4-fold higher than the MGI079 line and 1.4-fold higher than the Heugnam line. Anthocyanin content in colored rice grains was negatively correlated with Hunter's L, a, and b values, with the correlation coefficients of $-5.64^{**}$, $5.21^{**}$ and -1.15, respectively. The grain length/width of a mutant of MGI079 segregated to a medium and bold type compared to the medium type of MGI079. However, the 1,000 grain weight was decreased to 13.6~19.6 g compared to 19.8 g for MGI079. Amylose content of the endosperm was 5.6~23.8% higher than in the MGI079 line. The grain of mutants of MGI079 was distinguished by its starch characteristics. The higher antioxidant activity of the MGI079-2-1 and MGI079-2-6 lines indicated functional characteristics associated with high-value resources, so future breeding should focus on the development of pigments in colored rice in new varieties.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.4
• /
• pp.422-431
• /
• 2019

Severe droughts in spring have occurred frequently in Korea in recent years, exerting a critical impact on corn yield. Therefore, it is necessary to find physiological and/or molecular indicators of the response to drought stress in maize plants. In this study, we investigated the effects of water-deficit stress on two Korean elite F₁ maize hybrids, Ilmichal and Gwangpyeongok, by withholding water for 10 days at tassel initiation. The water deficit drastically reduced the relative leaf water content, leaf number, leaf area, and stem length, leading to dry matter reduction. Moreover, it reduced the SPAD values and stomatal conductance of leaves in drought-stressed plants of both hybrids. Importantly, the number of leaves and SPAD value were non-destructive and easy to investigate in response to water-deficit stress, suggesting that they may be useful indicators for screening drought-tolerant genetic resources. We detected more than 100 spots that were differentially accumulated under drought stress. Of these spots, a total of 21 protein spots (≥1.5-fold) from drought-exposed maize leaves were successfully analyzed by MALDI-TOF-TOF mass spectrometry. Functional annotation using Gene Ontology analysis revealed that most of the identified proteins were involved in carbohydrate metabolism, stress response fatty acid catabolism, photosynthesis, energy metabolism, and transport. The protein expression levels were increased in both Ilmichal and Gwangpyeongok, except for triosephosphate isomerase, fructose-bisphosphate aldolase, and an uncharacterized protein. The lactoylglutathione lyase delta (3,5)-delta (2,4)-dienoyl-CoA isomerase was overexpressed in Gwangpyeongok only. The results obtained from this study suggest that the drought-specific genes may be useful as molecular markers for screening drought-tolerant maize genotypes.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.85-94
• /
• 2005

Most of product designers use 3D CAD system as a inevitable design tool nowadays and many new products are developed through a concurrent engineering process. However, it is very difficult for novice designers to get the sense of reality from modeling objects shown in the computer screens. Such a intangibility problem comes from the lack of haptic interactions and contextual information about the real space because designers tend to do 3D modeling works only in a virtual space of 3D CAD system. To address this problem, this research investigate the possibility of a interactive quantified structure simulation for product design using AR(augmented reality) which can register a 3D CAD modeling object on the real space. We built a quantified structure simulation system based on AR and conducted a series of experiments to measure how accurately human perceive and adjust the size of virtual objects under varied experimental conditions in the AR environment. The experiment participants adjusted a virtual cube to a reference real cube within 1.3% relative error(5.3% relative StDev). The results gave the strong evidence that the participants can perceive the size of a virtual object very accurately. Furthermore, we found that it is easier to perceive the size of a virtual object in the condition of presenting plenty of real reference objects than few reference objects, and using LCD panel than HMD. We tried to apply the simulation system to identify preference characteristics for the appearance design of a home-service robot as a case study which explores the potential application of the system. There were significant variances in participants' preferred characteristics about robot appearance and that was supposed to come from the lack of typicality of robot image. Then, several characteristic groups were segmented by duster analysis. On the other hand, it was interesting finding that participants have significantly different preference characteristics between robot with arm and armless robot and there was a very strong correlation between the height of robot and arm length as a human body.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.7
• /
• pp.853-859
• /
• 2006

This study was carried out to investigate the effect of egg shell calcium salt types and egg shell membrane on calcium metabolism in rats. Sprague-Dawley male rats, 4 weeks of age, were fed on free-calcium diets for 2 weeks after adjustment period. Rats weighing approximately $247{\pm}2.3g$ were divided into 6 groups and were fed on the experimental diets containing 0.2% calcium for 4 weeks. Experimental groups were as follows; {ES(M+)} (egg shell powder diet with egg shell membrane), {ES(M-)} (egg shell powder diet without egg shell membrane), {AC(M+)} (egg shell calcium acetate diet with egg shell membrance), {AC(M-)} (egg shell calcium acetate diet without eg shell membrane), {GC(M+)} (egg shell calcium glucuronate diet with egg shell membrane) and {GC(M-)} (egg shell calcium glucuronate diet without egg shell membrane). Bone length of femur was significantly different by the types (p<0.05) of egg shell calcium salts. Bone mineral density of femur showed the highest level in AC(M-) group. Calcium content of femur and calcium absorption rate were higher in egg shell calcium salt groups than in eg shell powder groups. Calcium absorption rate and retention were significantly different (p<0.05) among the types of eg shell calcium salts and were higher in the AC(M-) group than in the other groups. Alkaline phosphatase activity, parathyroid hormone and osteocalcin levels of serum showed no significant difference among the experimental groups. From the above results, it is concluded that bioavailability of calcium is higher in groups of egg shell calcium salts compared to those in egg shell powder, even though egg shell membrane has no effect on calcium metabolism. Thus, these findings suggest the possibility of using egg shell calcium salts as a functional food material related to calcium metabolism.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.46-55
• /
• 2016

This work proposes a 13b 100MS/s 45nm CMOS ADC with a high dynamic performance for IF-domain high-speed signal processing systems based on a four-step pipeline architecture to optimize operating specifications. The SHA employs a wideband high-speed sampling network properly to process high-frequency input signals exceeding a sampling frequency. The SHA and MDACs adopt a two-stage amplifier with a gain-boosting technique to obtain the required high DC gain and the wide signal-swing range, while the amplifier and bias circuits use the same unit-size devices repeatedly to minimize device mismatch. Furthermore, a separate analog power supply voltage for on-chip current and voltage references minimizes performance degradation caused by the undesired noise and interference from adjacent functional blocks during high-speed operation. The proposed ADC occupies an active die area of $0.70mm^2$, based on various process-insensitive layout techniques to minimize the physical process imperfection effects. The prototype ADC in a 45nm CMOS demonstrates a measured DNL and INL within 0.77LSB and 1.57LSB, with a maximum SNDR and SFDR of 64.2dB and 78.4dB at 100MS/s, respectively. The ADC is implemented with long-channel devices rather than minimum channel-length devices available in this CMOS technology to process a wide input range of $2.0V_{PP}$ for the required system and to obtain a high dynamic performance at IF-domain input signal bands. The ADC consumes 425.0mW with a single analog voltage of 2.5V and two digital voltages of 2.5V and 1.1V.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.403-411
• /
• 2009

We inspected seed sizes of 353 genetic accessions of watermelon to diversify functional utility related to seed size and classified them into six representative groups based on their seed sizes. Each group was named as giant seed (GS), big seed (BS), medium size (NS), small size (SS), micro seed (MS) and tomato seed (TS) from the biggest. As the seed size was getting smaller, decreased seed length and seed width, increased seed number per fruit, and decreased seed weight per fruit were observed, but seed shape did not change significantly. In order to study the effect of seed size on fruit weight and seed germination, we developed three near isogenic lines (NILs) with three different seed sizes, SS, MS and TS, from crossing between two accessions 'NT' and 'TDR', and one NIL with seed size of TS from crossing between two accessions 'S55' and 'TDR'. In the study on the fruit weight of NILs with various seed sizes, NS, SS, MS, and TS NILs produced an average of 6.4, 6.3, 5.9, and 4.2 kg fruits, respectively. The bigger seed types showed the better germination rate. NS type showed the highest germination percentage, while TS showed very low germination percentage. Fermentation treatment for 48 hrs increased the germination percentage on TS type seed, but still remained at a low level. In NS, SS, and MS material, the ratio of embryo/whole seed weight was over 50%, meanwhile that of TS was only 44.4% of which low embryo percentage would be one of the reason of low germination percentage. From this study, we concluded that watermelon has very wide genetic diversity on seed size which is somehow related to fruit sizes and germination rate.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.443-446
• /
• 2008

'Gangbaek' is a japonica rice variety developed and registered by the rice breeding team of Department of Rice and Winter Cereal Crop, NICS, RDA in 2006. 'Gangbaek' was derived from a cross between 'Suweon345' with good grain quality and 'DV85' resistant to bacterial blight, $K_{3a}$. $F_1$ plants were grown in the greenhouse in winter of 1992/1993 and backcrossed with 'Suweon345' as the recurrent parent. Plants resistant to $K_{3a}$ race of bacterial blight (BB) were selected from $BC_1F_1$ to $BC_4F_1$ and used as parents in the backcrossing processes. This variety has about 120 days growth duration from transplanting to harvesting in west-southern coast and Honam plain of Korea. It is about 69 cm in culm length and tolerance to lodging. In reaction to biotic and abiotic stresses, it shows moderately resistance to blast, and resistance to bacterial blight pathogen, $K_1$, $K_2$, $K_3$ and $K_{3a}$, but susceptible to other major diseases and insect pests. The milled rice of 'Gangbaek' exhibits translucent, relatively clear non-glutinous endosperm and midium short grain. It has lower amylose content of 18.6% and protein content of 6.4% compared with 'Nampyeongbyeo'. The milled rice yield performance of this variety is about 5.28 MT/ha in local adaptability test for three years. This cultivar would be adaptable to the bacterial blight-prone area in the south-western coastal and Honam plain of Korea.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.503-506
• /
• 2008

'Saenuri' is a new japonica rice variety developed and registered by the rice breeding team of Department of Rice and Winter Cereal Crop, NICS, RDA in 2007. This variety was derived from a cross between Gyehwa17 with lodging tolerance and high yield potential, and HR14026-B-68-6-1-5 with resistance to diseases and good eating quality. This variety has about 124 days growth duration from transplanting to harvesting in west-southern coast, Honam and Youngnam plain of Korea. It is about 78 cm in culm length and tolerance to lodging. In reaction to biotic and abiotic stresses, it shows moderately resistance to blast, and resistance to bacterial blight pathogen races from K1 to $K_3$ and stripe virus, but susceptible to other major diseases and insect pests. The milled rice of "Saenuri" exhibits translucent, relatively clear non-glutinous endosperm and midium short grain. It has similar amylose content of 19.0% and lower protein content of 6.1%, and good palatability of cooked rice compared with Nampyeongbyeo. The milled rice yield performance of this variety is about 5.71MT/ha in local adaptability test for three years. "Saenuri" would be adaptable to west-southern coast, Honam and Youngnam plain of Korea.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.529-532
• /
• 2008

Manna is a new japonica rice cultivar developed from the cross between Iksan438 and Ilmibyeo by the rice breeding team of Department of Rice and Winter Cereal Crop, RDA, in 2005. This cultivar has a short grain shape and about 97 days growth duration from late transplanting to harvesting under Korean climatic conditions. It is resistant to lodging with average 70 cm of culm length. The milled kernels of Manna are translucent with non-glutinous endosperm. It has about 19% amylose content and good palatability of cooked rice compared with Geumobyeo. This cultivar shows resistance to leaf blast and neck blast but susceptibility to bacterial blight and stripe virus diseases. The milled rice yield potential of Manna is about 5.05 MT/ha under the late transplanting cultivation. Manna would be adaptable for the middle and Honam plain of Korea.