• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.134-143
• /
• 1998

Twin Blocks are simple bite-blocks that effectively modify the occlusal inclined plane to induce favorably directed occlusal forces by causing a functional mandibular displacement. These devices use upper and lower bite-blocks that engage on occlusal inclined planes. Twin Blocks use the forces of occlusion as the functional mechanism to correct the malocclusion. To get an excellent result in the treatment by using the Twin Block appliances, proper case selection must be needed. Twin Block treatment is performed in two stages. Twin Blocks are used in the active phase to correct the anteroposterior relationship and establish the correct vertical dimension. Once this phase is accomplished, the Twin Blocks are replaced with an upper Hawley type of appliance with an anterior inclined plane, which is then used to support the corrected position as the posterior teeth settle fully into occlusion. The Twin Block is the most comfortable, the most esthetic ane the most efficient of all the functional appliances. Twin Blocks have many advantages compared to other functional appliances. Patients can wear Twin Blocks 24 hours per day and can eat comfortably with the appliances in place. From the moment Twin Blocks are fitted, the appearance is noticeably improved. There is less interference with normal function. Integration with conventional fixed appliances is simpler than with any other functional appliance. Twin Blocks allow independent control of upper and lower arch width. Appliance design is easily modified for transverse and sigittal arch development. The authors treated Class II malocclusion with Twin Blocks. and the results as follows; 1. Rapid profile improvement was achieved in 2-3 months. 2. There was excellent patient cooperation. 3. Severe overjet and overbite were reduced. 4. Class II molar relationship was changed to Class I.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.577-585
• /
• 1994

The Twin Blocks technique was developed by Dr. William Clark of Scotland during the early 1980's. Twin Blocks are an uncomplicated system that incorporates the use of upper and lower bite blocks. These blocks reposition the mandible and redirect occlusal forces to achieve rapid correction of malocclusions. They are also comfortable and the patients wear them full-time-inducing eating time. Occlusal forces transmitted through the dentition provide a constant proprioceptive stimulus to influence the rate of growth and the trabecular structure of the supporting bone. The features of Twin Blocks mean easier and quicker treatment. The occlusal inclined plane is the fundamental functional mechanism of the natural dentition. Twin blocks are bite blocks that effectively modify the occlusal inclined plane to induce favorably directed occlusal forces by causing a functional mandibular displacement. Upper and lower bite blocks interlock at a $45^{\circ}$ angle and are designed for full-time wear to take advantage of all functional forces applied to the dentition including the forces of mastication. The patients who were treated with modified Twin Blocks, and following results were observed: 1. Large overjet and deep overbite were corrected. 2. Class II molar relationship was changed into Class I. 3. Labial inclination of upper incisors was corrected by adjustment of labial bow of upper bite block. 4. The profiles of two patients were improved by anterior displacement of mandible.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.96-105
• /
• 2013

This paper presents a standardization method for designing wire harness systems, based on the control types and functional blocks, for use in commercial vehicles. With a rapid increase in the installation of systems with added new features, it is very important to develop a reliable wire harness design in a short time by standardizing wire harness designs and reusing the standard design. Because the function of a system, particularly, for commercial vehicles, varies significantly on the basis of the requirements, regulations, and options, it is not effective to establish one standard design for one system. In addition, a system with the same function may differ in terms of the input conditions and output loads on the basis of the installed vehicle types, and it is not practical to standardize a harness design targeting an entire system. In this study, the wire harness designs of a system were classified into six categories based on the control types of the system: switch driven, control of a switch, control of an electronic control unit, unit driven, control of a unit, and connector operation. Then, a wire harness design of each system was divided into three blocks according to their functions: the control, drive, and monitoring blocks. The standard wire harness designs were made for each functional block of each control type. The advantage of this proposed method is that an effective and practical design can be obtained, which covers the diversities in the same system for different grades of commercial vehicles with a reduction in the number of wire harness supplements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.399-414
• /
• 2004

In this paper, an evolution of software reliability engineering in a large-scale software project is summarized. The considered software consists of many components, called functional blocks in software of switching system. These functional blocks are served as the unit of coding and test, and the software is continuously updated by adding new functional blocks. We are mainly concerned with the analysis of the effects of these software components in software reliability and reliability evolution. We analyze the static characteristics of the software related to software reliability using collected failure data during system test. We also discussed a pattern which represents a local and global growth of the software reliability as version evolves. To find the pattern of system software, we apply the S-shaped model to a collection of failure data sets of each evolutionary version and the Goel-Okumoto(G-O) model to a grouped overall failure data set. We expect this pattern analysis will be helpful to plan and manage necessary human/resources fur a new similar software project which is developed under the same developing circumstances by estimating the total software failures with respect to its size and time.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.309-309
• /
• 2006

Latest developments on hybrid nanostructured materials fabricated by applying self-assembly strategies on organic/inorganic nanotemplates are discussed. Within this frame, numerous functional nanomaterials including arrays of composite metal/semiconductor nanoparticles, planar waveguides and functional multilayer thin films are generated using self-assembled polymers as templates or building blocks. In particular, surface plasmon resonance based optical sensing is employed to investigate nanofabrication processes occurring in nanoscale dimention. We also suggest unprecedented pathways to hybrid supramolecular multilayer nanoarchitectures in 1D or 2D geometry via layer-by-layer self-assembly.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.433-434
• /
• 2008

In this paper, we present an improved design of the conventional ARM7 processor. It is based on the flip-flop to improve the pipeline performance of the processor. Also for improving the performance, the optimization of functional blocks and a multiplier is carried out. According to the experimental results, the maximum delay-time of functional blocks and the execution cycle of a multiplier is reduced by 33% and 2 cycles compared with a conventional design, respectively. Therefore, it leads to improve an operation speed about 30%.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.8.1-8.1
• /
• 2009

The self-assembly of peptide-based building blocks into nanostructures is an attractive route for fabricating novel materials because of their capacity for molecular recognition and functional flexibility as well as the mild conditions required in the fabrication process. Among various peptide-based building blocks forming nanostructures, the simplest building blocks are aromatic dipeptides like diphenylalanine, which can readily self-assemble into nanotubes in aqueous solutions at ambient conditions. Recently, we have developed a high-temperature solid-phase self-assembly process for diphenylalanine. Through this novel process, we succeeded in the growth of vertically well-aligned, uniform nanowires from amorphous peptide thin film. To demonstrate the versatility of our approach, we also fabricated a micropattern of peptide nanowires by combining our solid-phase growth method and simple soft lithographic techniques. We believe that our studies on peptide self-assembly will provide a new horizon for peptide-based nanofabrication.

• Macromolecular Research
• /
• v.10 no.6
• /
• pp.359-364
• /
• 2002

A series of PLA-PEO-PLA triblock stereo-copolymers with varying PLA/PEO and L-DL-LA ratios were synthesized via ring opening pelymerizations. Aqueous solutions of these copolymers undergo thermo-responsive phase transitions as the temperature monotonically increases. Further study shows that there is a critical gel concentration (CGC), and also lower and upper critical gel temperatures (CGTs), at which the thermo-responsive phase transition occurs. The CGC and CGTs are affected by various factors such as block length, as well as the compositions of the PLA blocks and of the additives. In particular, the changes in the phase diagram produced by varying the L-/DL-LA ratio in the PLA blocks were determined to be mainly due to consequent stereo-regularity changes in the PLA blocks.

• Electronics and Telecommunications Trends
• /
• v.14 no.4 s.58
• /
• pp.1-9
• /
• 1999

In this paper, we summarize the lessons learned from the applications of the software reliability engineering to a large-scale software project. The considered software is the software system of the TDX-10 ISDN switching system. The considered software consists of many components, called functional blocks. These functional blocks serve as the unit of coding and test. The software is continuing to be developed by adding new functional blocks. We are mainly concerned with the analysis of the effects of these software components to software reliability and with the analysis of the reliability evolution. We analyze the static characteristics of the software related to software reliability using failure data collected during system test. We also discussed a pattern which represents a local and global growth of the software reliability as version evolves. To find the pattern of software of the TDX-10 ISDN system, we apply the S-shaped model to a collection of failure data sets of each evolutionary version and the Goel-Okumoto (G-O) model to a grouped overall failure data set. We expect this pattern analysis will be helpful to plan and manage necessary human/resources for a new similar software project which is developed under the same developing circumstances by estimating the total software failures with respect to its size and time.

• Journal of the Korean housing association
• /
• v.15 no.1
• /
• pp.205-214
• /
• 2004

The intent of this study is to investigate the current situations and planning implications of elementary schools in urban housing blocks, and to propose the planning and design guidelines for them. The premise of this research is that an elementary school should function as a communal facility, shared by its community, so called open-school. 32 schools in three new towns were selected as sample cases and they were closely surveyed in terms of their site planning issues in residential blocks, and three sample open-elementary schools were analyzed in a comparative manner for finding their roles and functional fulfillment as a communal facility in the neighborhoods. Based on the findings, several planning principles and design techniques or devices are suggested for the utilization of elementary schools by local residents, mainly making issues of location, relationship to other facilities and open spaces in residential blocks, access, apartment layout, school building and outdoor spaces, and open program.