• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.5.1-5.1
• /
• 2010

One of the most important environmental problems is global warming. Global warming is caused by increase in the amounts of water vapor, methane, carbon dioxide and other gases being released into the atmosphere as a result of the burning of fossil fuels. It has thus become important to reduce fossil fuel use. Environmentally friendly preparation of functional materials has, therefore, attracted much interest for environmental problems. Furthermore, nature mimetic processes are recently been of great interest as environmentally friendly one. There have been many studies on fabrication of various functional nanocrystals. Among various nanocrystal fabrication techniques, flux growth is an environmentally friendly, very convenient process and can produce functional nanocrystals at temperatures below the melting points of the solutes. Furthermore, this technique is suitable for the synthesis of crystals having an enhedral habit. In flux growth, the constituents of the materials to be crystallized are dissolved in a suitable flux (solvent) and crystal growth occurs as the solution becomes critically supersaturated. The supersaturation is attained by cooling the solution, by evaporation of the solvent or by a transport process in which the solute is made to flow from a hotter to a cooler region. Many kinds of oxide nanocrystals have been grown in our laboratory. For example, zero- (e.g., particle), one- (e.g., whisker and tube) and two-dimensional (e.g., sheet) nanocrystals were successfully grown by flux method. Our flux-growth technique has some industrial and ecological merits because the nanocrystal fabrication temperatures are far below their melting points and because the used reagents are less harmless to human being and the environment.

• The Journal of Korean Physical Therapy
• /
• 제27권4호
• /
• pp.207-213
• /
• 2015

Purpose: The aim of the current study was to investigate EMG activity on dynamic balance of subjects with functional lumbar instability following fatigue of low back. Methods: The subjects (24 university students) were divided into 2 groups; functional lumbar instability group (6 males and 6 females) and lumbar stable group (7 males and 5 females) who could complete a questionnaire and undergo a prone instability test. All participants were evaluated for distribution of muscle activity using the TeleMyo DTSTM system. Dynamic balance was tested by Y balance test. This study was conducted for measurement of EMG activity on dynamic balance with the difference between FLIG and control group following muscle fatigue. Results: The functional lumbar instability group (FLIG) showed a significantly lower YBT score (%) of anterior, posterolateral direction on Y-balance test (YBT) in dynamic balance than the lumbar stable group (LSG) (p<0.05). The FLIG was significantly lower than the LSG in anterior direction in EMG activity(%) of MF, RA, ES, GMX, GME, RF, and posteromedial direction in EMG activity(%) of IO, ES and then posterolateral direction in EMG activity(%) of IO, ES in dynamic balance (p<0.05). There was significant correlation of MF, RA, and GMX in anterior reach direction (p<0.05) and ES, GME (p<0.01) and IO, ES in posteromedial reach direction (p<0.05) and EO, ES, GMX in posterolateral reach direction (p<0.05) there was positive correlation. Conclusion: This study showed that FLIG effected EMG activity by dynamic balance following muscle fatigue. Further study is needed for measurement of various ages and work with lumbar instability for clinical application.

• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.488-502
• /
• 2020

In this study, the moisture absorption and desorption properties presented by the Health-Friendly Housing Construction Standards of South Korea were compared using the wood of three tree species (Douglas-fir, Hinoki, Larch) and two types of wood-based materials(Plywood, WML Board^Ⓡ). The national standards for functional building materials present that the amounts of moisture absorption and desorption should be at least 65g/㎡ on average, respectively according to the test method under KS F 2611:2009. Therefore, in this study, the moisture absorption/desorption properties of materials with no treatment (Control), with punching, and with surface stain finishing and the moisture absorption/desorption property improvement effects of the treatments were compared and analyzed. According to the results of this study, it was evaluated that all five types of wood and wood-based materials tested did not satisfy the amount of moisture absorption/desorption of at least 65g/㎡, which is the performance standard for moisture absorption/desorption functional building materials, indicating that untreated wood and wood-based materials cannot be applied as functional finishing materials according to the Health-Friendly Housing Construction Standards. The surface stain finishing greatly reduced the moisture absorption and desorption rates of the materials, and the amounts of moisture absorbed and desorbed were also shown to decrease by at least two times on average. When the surfaces of the materials were punched with Ø4mm holes at intervals of 20 mm, the moisture absorption/desorption areas increased from 18% to 51%, and this increase was shown to be capable of increasing the amounts of moisture absorbed/desorbed by 29% on average at the minimum, and 81% on average at the maximum. The effects of punching were shown to be identical even in cases where the materials were stain finished. For the application of wood or wood-based materials as eco-friendly, health-friendly, and moisture absorption/desorption functional building materials hereafter, it is judged that new physical and chemical improvement studies should be conducted, and treatment methods should be developed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.482-483
• /
• 2011

Graphene is a good candidate for the future nano-electronic materials because it has excellent conductivity, mobility, transparency, flexibility and others. Until now, most graphene researches are focused on the nano electronic device applications, however, biological application of graphene has been relatively less reported. We have fabricated a deoxyribonucleic acid (DNA) conjugated graphene field-effect transistor (FET) and measured the electrical transport characteristics. We have used graphene sheets grown on Ni substrates by chemical vapour deposition. The Raman spectra of graphene sheets indicate high quality and only a few number of layers. The synthesized graphene is transferred on top of the substrate with pre-patterned electrodes by the floating-and-scooping method [1]. Then we applied adhesive tapes on the surface of the graphene to define graphene flakes of a few micron sizes near the electrodes. The current-voltage characteristic of the graphene layer before stripping shows linear zero gate bias conductance and no gate operation. After stripping, the zero gate bias conductance of the device is reduced and clear gate operation is observed. The change of FET characteristics before and after stripping is due to the formation of a micron size graphene flake. After combined with 30 base pairs single-stranded poly(dT) DNA molecules, the conductance and gate operation of the graphene flake FETs become slightly smaller than that of the pristine ones. It is considered that DNA is to be stably binding to the graphene layer due to the ${\pi}-{\pi}$ stacking interaction between nucleic bases and the surface of graphene. And this binding can modulate the electrical transport properties of graphene FETs. We also calculate the field-effect mobility of pristine and DNA conjugated graphene FET devices.

• 대한인간공학회지
• /
• 제26권2호
• /
• pp.1-13
• /
• 2007

Ergonomic methods have been effectively applied to design and evaluation of functional clothing. The goals of the present study are to: (1) develop an ergonomic evaluation system for the systematic analysis of functional clothing and (2) examine the usefulness of the proposed evaluation system by applying to flame-proof clothing. Based on the survey of literature and the brainstorming of experts in clothing design and ergonomics, factors considered for clothing evaluation were selected, classified, and complemented, resulting in an ergonomic clothing evaluation system consisting of four factor categories (clothing construction, user, work and environment, and user response). Using the proposed system, a field survey and a laboratory experiment were conducted for flame-proof clothing to identify its design problems. The field survey to workers found a comprehensive set of problems on the flame-proof clothing design in terms of pattern, textile, and color. The laboratory experiment identified additional design problems using a questionnaire that was developed based on an analysis on the relationship between clothing design components and ergonomic evaluation measures. The present study showed the ergonomic evaluation system and the relationship analysis of clothing design components and ergonomic evaluation measures are of use to identify design problems of functional clothing in a comprehensive and analytic manner.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권3호
• /
• pp.219-230
• /
• 2023

With the development of autonomous driving technology, as the use of software in vehicles increases, the complexity of the system increases and the difficulty of development increases. Developments that meet ISO 26262 must be carried out to reduce the malfunctions that may occur in vehicles where the system is becoming more complex. ISO 26262 for the functional safety of the vehicle industry proposes to consider functional safety from the design stage to all stages of development. Specifically at the software level, the requirements to be complied with during development and the requirements to be complied with during verification are defined. However, it is not clearly expressed about specific design methods or development methods, and it is necessary to supplement development guidelines. The importance of analysis and verification of requirements is increasing due to the development of technology and the increase of system complexity. The vehicle industry must carry out developments that meet functional safety requirements while carrying out various development activities. We propose a process that reflects the perspective of system engineering to meet the smooth application and developmentrequirements of ISO 26262. In addition, the safety analysis/verification FMEA processforthe safety of the proposed ISO 26262 function was conducted based on the FCAS (Forward Collision Avoidance Assist System) function applied to autonomous vehicles and the results were confirmed. In addition, the safety analysis/verification FMEA process for the safety of the proposed ISO 26262 function was conducted based on the FCAS (Forward Collision Avoidance Assist System) function applied to the advanced driver assistance system and the results were confirmed.

• 대한의용생체공학회:의공학회지
• /
• 제28권2호
• /
• pp.250-257
• /
• 2007

Functional gastrointestinal disorders affect millions of people of all age regardless of race and sex. There are, however, rare diagnostic methods for the functional gastrointestinal disorders because functional disorders show no evidence of organic and physical causes. Our research group identified recently that the gastrointestinal tract well in the patients with the functional gastrointestinal disorders becomes more rigid than healthy people when palpating the abdominal regions overlaying the gastrointestinal tract. The aim is, therefore, to develop a diagnostic method for the functional gastrointestinal disorders based on quantitative measurement of the rigidity of the gastrointestinal tract well using ultrasound technique. For this purpose, a preliminary ultrasound diagnostic system was developed and verified through phantom tests. The system consisted of transmitter, ultrasonic transducer, receiver, TGC, and CPLD, and verified via a phantom test. For the phantom test, ten soft-tissue specimens were harvested from porcine. Five of them were then treated chemically to mimic a rigid condition of gastrointestinal tract well, which was induced by functional gastrointestinal disorders. Additionally, the specimens were tested mechanically to identify if the mimic was reasonable. The customized ultrasound system was finally verified through application to human subjects with/without functional gastrointestinal disorders(Normal and Patient Groups). It was identified from the mechanical test that the chemically treated specimens were more rigid than normalspecimen. This finding was favorably compared with the result obtained from the phantom test. The phantom test also showed that ultrasound system well described the specimen geometric characteristics and detected an alteration in the specimens. The maximum amplitude of the ultrasonic reflective signal in the rigid specimens $(0.2{\pm}0.1Vp-p)$ at the interface between the fat and muscle layers was explicitly higher than that in the normal specimens $(0.1{\pm}0.0Vp-p)$ (p<0.05). Clinical tests using our customized ultrasound system for human subject showed that the maximum amplitudes of the ultrasonic reflective signals nea. to the gastrointestinal tract well for the patient group$(2.6{\pm}0.3Vp-p)$ were generally higher than those in normal group$(0.1{\pm}0.2Vp-p)$ (p<0.05). These results suggest that newly designed diagnostic system based on ultrasound technique may diagnose enough the functional gastrointestinal disorders.

• Journal of Microbiology and Biotechnology
• /
• 제23권6호
• /
• pp.856-863
• /
• 2013

Application of rhizospheric fungi is an effective and environmentally friendly method of improving plant growth and controlling many plant diseases. The current study was aimed to identify phytohormone-producing fungi from soil, to understand their roles in sesame plant growth, and to control Fusarium disease. Three predominant fungi (PNF1, PNF2, and PNF3) isolated from the rhizospheric soil of peanut plants were screened for their growth-promoting efficiency on sesame seedlings. Among these isolates, PNF2 significantly increased the shoot length and fresh weight of seedlings compared with controls. Analysis of the fungal culture filtrate showed a higher concentration of indole acetic acid in PNF2 than in the other isolates. PNF2 was identified as Penicillium sp. on the basis of phylogenetic analysis of ITS sequence similarity. The in vitro biocontrol activity of Penicillium sp. against Fusarium sp. was exhibited by a 49% inhibition of mycelial growth in a dual culture bioassay and by hyphal injuries as observed by scanning electron microscopy. In addition, greenhouse experiments revealed that Fusarium inhibited growth in sesame plants by damaging lipid membranes and reducing protein content. Co-cultivation with Penicillium sp. mitigated Fusarium-induced oxidative stress in sesame plants by limiting membrane lipid peroxidation, and by increasing the protein concentration, levels of antioxidants such as total polyphenols, and peroxidase and polyphenoloxidase activities. Thus, our findings suggest that Penicillium sp. is a potent plant growth-promoting fungus that has the ability to ameliorate damage caused by Fusarium infection in sesame cultivation.

• 산업기술연구
• /
• 제25권B호
• /
• pp.81-87
• /
• 2005

This project addresses the product identification and design application of corrugated products for kinetic architectural applications. Initially, an architectural approach to product identification was carried out with the end goal of demonstrating application design principles of numerous novel architectural examples from the forest products industry. A design and prototyping stage followed demonstrating such application design principles and functional analysis on various novel architectural examples. The results of coupling product identification with proven application advantages will be of potential value not only to architecture but also to other designers in the arts and sciences. The general motivation for the research arises out of a growing interest corrugated and paper products to be ideally suited for various architectural applications for their unparallel environmental benefits. Applications in architecture that use fewer resources and that adapt efficiently to complex and changing conditions are particularly relevant for an industry (architecture) that is increasingly aware of its environmental responsibilities. Corrugated and paper products are highly under-utilized by the building industry as design choice material for both interior and exterior applications. An increased awareness of the benefits of corrugated and paper products coupled with a process of designing for the total use and reuse will prove to be a valuable means by which issues of energy efficiency and environmental quality of buildings could be enhanced to be more efficient, affordable, and therefore reach a broader audience of users.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.181-181
• /
• 2010

Few-walled carbon nanotubes (FWNTs)-based field emitters with long term stability are fabricated by using a spray method. Tetraethylorthosilicate (TEOS) sol as a binder was mixed with dispersed solution of FWNTs to enhance the adhesion of FWNTs on the cathode substrate. Due to the strong intermolecular interaction of TEOS to the functional groups attached on CNTs and substrate, CNTs are tightly adhered to the cathode electrode when heat treatment is performed at $150^{\circ}C$ for 1 hour, resulting in a stable electron emission of CNT emitters for long time. Excellent field emission characteristics were exhibited, with a large field enhancement factor and low turn-on voltage, comparable to those of CNT emitters fabricated by a screen printing of CNT paste. Therefore, FWNTs / TEOS hybrid films could be utilized as an alternative for the efficient and reliable field emitters.