• 복식
• /
• 제61권4호
• /
• pp.152-168
• /
• 2011

The purpose of this study is to develop a design prototype of outdoor-wear which is suitable for trekking. For achieving this purpose, 6 factors(bodice, sleeve, hood, pockets, opening, hem-line) considered for clothing function were selected, classified, and complemented based on the survey of literature and the research of 185 designs in 12 outdoor-wear brands. The results are as follows; The removable hood and 4DM sleeve style with the elastic band and velcro for the cuffs was the most preferred in the detail design on the brand research. And also the ventilation function and 1 or 2 diagonal in-seam pocket, covered zipper was preferred. Based on this result, two design prototypes of men's outdoor-wear for trekking were suggested; jacket 1 has a slim waist line and a hip length. Front opening has a zip and placket for windproof effect. There is a detachable hood with stopper around the head line. 4DM sleeve and elastic band inserted at the end of sleeve, so that prevent the hem-line raising. Two inseam pocket is placed slightly diagonal. Jacket 2 is a hood jacket with a york. The Jacket has a little roomier in waist and a hip length. Front opening is fastened by a waterproof zip. It has a 4DM sleeve and a princess line to make it placed two pocket which have ventilation functionality.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.193-199
• /
• 2014

In this paper, we present an overview of the structure of a lab-built powered knee prosthesis and the control of it. We build a powered prosthesis prototype on the basis of previous researches and aim at obtaining the essential technology related with its control. We adopt the slider-crank mechanism with a DC motor as an actuator to manipulate the knee joint. We also build an embedded control system for the prosthesis with a 32-bit DSP controller as a main computation unit. We divide the gait phase into five stages and use a FSM (Finite State Machine) to generate a torque reference needed for each stage. We also propose to use a position-based impedance controller for driving the powered knee prosthesis stably. We perform some walking experiments at fixed speeds on a tread mill in order to show the feature of the built powered prosthesis. The experimental results show that our prosthesis has the ability to provide a functional gait that is representative of normal gait biomechanics.

• 대한의용생체공학회:의공학회지
• /
• 제30권1호
• /
• pp.66-78
• /
• 2009

A mobile ultrasound scanner developed for use in point-of-care applications is introduced, which can not only provide ultrasound images but can also measure various bio-signals. The mobile ultrasound scanner is also designed to meet the demanding requirements for point-of-care diagnosis, such as battery-powered operation, portability in terms of size and weigh, and real-time wireless communications capability for remote diagnosis. To meet these requirements, an efficient beamforming method for high resolution imaging with a small number of active elements, a hardware efficient beamformer architecture, and echo processing algorithms with greatly reduced computational complexity have been developed. Experimental results show that the prototype mobile ultrasound scanner is fully functional and satisfies most of the design requirements.

• 대한산업공학회지
• /
• 제36권4호
• /
• pp.230-242
• /
• 2010

In this paper, an environmental monitoring and diagnosis system based on ubiquitous computing technology, shortly u-Eco Monitoring System, is proposed. u-Eco Monitoring System is designed to: 1) Collect information from the manufacturing processes via ubiquitous computing technology, 2) Analyze the current status, 3) Identify the cause of problem if detected by rule-based and case-based reasoning, and 4) Provide the results to the operator for proper decision making. Based on functional modeling, a generic architecture is derived, followed by application to a manufacturing system in iron and steel making industry. Finally, to show the validity of the proposed method, a prototype is developed and tested. The developed methods can be used as a conceptual framework for designing environmental monitoring and diagnosis system for industrial practices by which monitoring accuracy and response time for abnormal status can be significantly enhanced, and relieving operator pressure from manual monitoring and error-prone decision making.

• International Journal of Advanced Culture Technology
• /
• 제6권3호
• /
• pp.129-141
• /
• 2018

As the scope of social expectations and roles in the design field has expanded, the demand for education to cope with changes in the technology environment is increasing in design education. In response to this trend, microcontroller board-type design-prototyping tools have also been introduced into design education, and much educational content is being developed. However, there is the perception that students who are majoring in design without engineering knowledge are still barred from entry. A variety of educational content and tools have been developed to solve these difficulties, although there are several limitations to their practical application. Especially, in the design education courses in universities, the functional expectation level for prototyping is high, but most of the content developed for solving the difficulties has been developed for the lower education levels, and it could be said that a great deal of learning is necessary to solve the problem. In this study, students were asked about microcontroller board utilization and their satisfaction with their design through questionnaires and with the developed microcontroller board development direction via Focus Group Interviews. Based on this, we tested microcontroller boards that eliminate the coding process and which students can use to create and prototype their work as a suggestion to fulfil demand. After using the board, both the usability and improvement of the product were checked. Confirmation of the usefulness of the free- coding-type microcontroller was obtained through this study along with the possibility of responding to various educational demands by applying the application design related to this product.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.500-500
• /
• 2011

With recent advances in flexible and stretchable electronics, the development of physically responsive field-effect transistors (physi-FETs) that are easily integrated with transformable substrates may enable the omnipresence of physical sensing devices in electronic gadgets. However, physical stimuli typically induce whole sensing physi-FET devices under global influences that also cause changes in the parameters of FET transducers, such as channel mobility and dielectric capacitance that prevent proper interpretations of response in sensing materials. Extended-gate structures with isolated stimuli have been used recently in physi-FETs to demonstrate performances of sensing materials only. However, such approaches are limited to prototype researches since isolated stimuli rarely occur in real-life applications. In this report, we theoretically and experimentally demonstrated that integrating piezoelectric nanocomposites directly into flexible organic FETs (OFETs) as gate dielectrics provides a general research direction to physi-FETs with a simple device structure and the capability of precisely investigating functional materials. Measurements with static stimulations, which cannot be performed in conventional systems, exhibited giant-positive d33 values of nanocomposites of barium titanate (BT) NPs and poly (vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)).

• 대한의용생체공학회:의공학회지
• /
• 제40권6호
• /
• pp.223-229
• /
• 2019

The number of knee-related disease patients and knee joint surgeries is steadily increasing every year, and for knee rehabilitation training for these knee joint patients, it is necessary to strengthen the muscle of vastus medialis and quadriceps femoris. However, because of the cost and time-consuming difficulties of receiving regular hospital treatment in the course of knee rehabilitation, we developed knee exoskeleton using rapid prototype for knee rehabilitation with feedback from the electromyogram (EMG) and inertia motion unit (IMU) sensor. The modules was built on the basis of EMG and an IMU sensor applied complementary filter, measuring muscle activity in the vastus medialis and the range of joint operation of the knee, and then performing the game based on this measurement. The IMU sensor performed up to 97.2% accuracy in experiments with ten subjects. The functional game contents consisted of an exergaming platform based on EMG and IMU for the real-time monitoring and performance assessment of personalized isometric and isotonic exercises. This study combined EMG and IMU-based functional game with knee rehabilitation training to enable voluntary rehabilitation training by providing immediate feedback to patients through biometric information, thereby enhancing muscle strength efficiency of rehabilitation.

• 한국의류학회지
• /
• 제31권5호
• /
• pp.692-704
• /
• 2007

Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제34권8호
• /
• pp.689-696
• /
• 2007

소프트웨어의 개발 초기 단계에서 성능을 예측하는 기법은, 비 기능적 요구사항의 검증 및 소프트웨어의 성능을 향상시키기 위해 중요한 이슈가 되었다. 이를 위해 소프트웨어의 아키텍처를 수학적인 분석 모델로 변환시키는 기법들이 등장하게 되었다. 그러나 에이전트 기반 시스템을 개발하는 경우, 기존방법들은 에이전트 플랫폼의 성능을 정확하게 반영하지 못하기 때문에, 정확한 성능 예측 및 분석에 적용 할 수 없다. 본 논문에서는 정규화된 의미 기술언어를 이용하여 에이전트 기반 시스템 아키텍처의 성능을 예측하는 기법을 제안한다. 본 방식은 UML로 기술된 시스템의 아키텍처를 하드웨어 및 소프트웨어 플랫폼의 성능이 반영된 분석 모델로 변환시킨다. 성능 예측의 정확도를 평가하기 위해, 과거에 연구했던 전자상거래 시스템을 확장한 유비쿼터스 상거래 시스템 시나리오를 기반으로 프로토타입을 구현하여 성능을 측정하고 생성된 분석 모델로부터 측정된 성능 결과와 비교하였다. 그 결과 약 80%의 정확도를 보였다.

• 산업경영시스템학회지
• /
• 제43권4호
• /
• pp.133-141
• /
• 2020

Up to date cosmetic OEM/ODM (original equipment manufacturing/original development manufacturing) industry receives attention as a future growth engine due to steady growth. However, because of limited research and development capability, many companies have employed commercial management platforms specialized for large-sized companies; thus, overall system effectiveness and efficiency is low. Especially, MRP (material requirement planning) system introduced originally in 1970s is employed to calculate the requirement of the parts. However, dynamic nature of production lead time usually results in incorrect requirements. In addition, its algorithm does not consider the capability of the production resources. Also, because the commercial MRP system calculates all subcomponent for fixed period, the more goods have subcomponent, the slower calculation is. Therefore, conventional MRP system cannot respond complicated situation in time. In this study, we will suggest a new method that can respond to complicated situations resulting from short lead time and urgent production order in Korean cosmetic market. In particular, a distributed MRP system is proposed, that consists of multi-functional and operational modules, based on the characteristic of the BOM (bill of material). The distributed MRP system divides components (i.e. products and parts) into several fields and decrease the problem size; thus, we can respond to dynamically changed data any time. Through this solution, we can order components quickly, adjust schedules and planned quantity, and manage stocks reasonably. In addition, a prototype of the distributed MRP system is presented in this paper, in which ERP (enterprise resource planning) sever data is associated with an excel spreadsheet via MSsql. System user interface is implemented by a VBA (visual basic for applications) tool. According to a case study, response rate for delivery and planning achievement rate were enhanced about 20%, and inventory turnover was also decreased. Consequently, the proposed system improves overall profit.