• Journal of Power Electronics
• /
• v.18 no.5
• /
• pp.1595-1607
• /
• 2018

In this paper, a hierarchical control strategy is introduced to control a new three-port multidirectional DC-DC converter for integrating an energy storage system (ESS) to a bipolar DC microgrid (BPDCMG). The proposed converter provides a voltage-balancing function for the BPDCMG and adjusts the states of charge (SoC) of the ESS. Previous studies tend to balance the voltage of the BPDCMG buses with active sources or by transferring power from one bus to another. Furthermore, the batteries available in BPDCMGs were charged equally by both buses. However, this power sharing method does not guarantee efficient operation of the whole system. In order to achieve a higher efficiency and lower energy losses, a triple-layer hierarchical control strategy, including a primary droop controller, a secondary voltage restoration controller and a tertiary optimization controller are proposed. Thanks to the multi-functional operation of the proposed converter, its conversion stages are reduced. Furthermore, the efficiency and weight of the system are both improved. Therefore, this converter has a significant capability to be used in portable BPDCMGs such as electric DC ships. The converter modes are analyzed and small-signal models of the converter are extracted. Comprehensive simulation studies are carried out and a BPDCMG laboratory setup is implemented in order to validate the effectiveness of the proposed converter and its hierarchical control strategy. Simulation and experimental results show that using the proposed converter mitigates voltage imbalances. As a result, the system efficiency is improved by using the hierarchical optimal power flow control.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.171-171
• /
• 2013

2층 FCCL (연성회로기판, Flexible Copper Clad Laminate)에 있어서 폴리이미드 필름과 구리의 접착력을 향상 시키기 위해 기존에 사용되고 있는 Ni-Cr대신 박리강도가 높고 에칭성도 매우 뛰어난 Ni-Mo-Nb 박막을 Roll-to roll 스퍼터 장비를 이용하여 개발하였다. 새롭게 개발된 Ni-Mo-Nb 박막은 기존 연구되어진 Ni-Cr 물질 대비 고온 박리강도 약 1.5~2.0배, 에칭성 8배 이상의 매우 우수한 특성을 보였다. Ni-Mo-Nb 접착층의 두께가 7~40 nm로 증가함에 따라 상온 박리강도가 향상 되는 것을 확인하였다. Ni-Mo-Nb 박막을 증착 하기 전 폴리이미드 기판표면을 RF 플라즈마 전처리 하였을 때 0.67 kg f/cm의 우수한 상온 박리강도를 나타내었으며 FCCL 샘플을 $150^{\circ}C$에서 168시간동안 열처리 한 후 접착력을 측정하였을 때도 0.54 kg f/cm의 높은 고온 박리강도를 보였다. FCCL의 박리강도, 표면 거칠기, 원소들의 화학적 결합, 박막의 미세구조를 peel test, atomic force microscopy, X-ray photoelectron spectroscopy, transmission electron microscopy를 이용하여 폴리이미드 기판 플라즈마 전처리 효과를 확인하였다. 그 결과 플라즈마 전처리를 한 폴리이미드 기판의 경우 처리하지 않은 기판보다 상온과 고온에서 더 우수한 접착력을 가지는 것을 확인 할 수 있었는데 이것은 폴리이미드 기판의 표면 거칠기 증가에 의한 mechanical interlocking effect가 아닌 전처리를 통한 폴리이미드 표면 개질로 C-0, C-N와 같은 chemical functional group이 증가했기 때문인 것으로 확인되었다.

• Korean Institute of Interior Design Journal
• /
• v.14 no.5 s.52
• /
• pp.106-113
• /
• 2005

New images percolate through human consciousness by the media such as movies, TV programs, and brilliant advertisements. These images reproduce new ' things ' throughout the ' semantic processes ' by those who experience and recognize them. Alvin Toffler describes it as the ' information bomb ' and ' image fragments ' in his talk about the new paradigm of information-oriented era. The increasing number of images and their accelerating rate of appearance imply that images become more momentary, and are evidence that they are transforming entire human life and consciousness. Such awareness means a lot to a designer. Especially, the subject that how modern space-dominating images are related to the structure and materials constituting the space and communicate with human mind will be an important factor in establishing the human-space relationship in the future. Furthermore, the present age overspread with various medium is not the only one privileged of the images that exist within space. They are the results of continuous expansion of existing images, and also process of evolution of space powered by the fusion of images and digital media. Imagified space is a boundary layer of Cyberspace, and the space itself becomes an interface by human recognition and participation. Now, the functional classification of spaces such as ' office, ' ' cafe, ' and ' school ' is meaningless. Whatever it may be, the function of a space is defined by the information it interfaces, and therefore it becomes an interface to information through a large number of images. Based on this idea, we will observe the imagificaiton of space in the form of discussion, and from that, try to understand the phenomenon through the real world examples.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.1
• /
• pp.53-60
• /
• 2014

IEEE 802.15.4 is one of the most widely adopted physical layer standards in the area of LR-WPAN(Low-Rate Wireless Personal Area Network). Numerous previous researches have contributed to deep insights on energy efficiency, transmission throughput, and reliability that IEEE 802.15.4 delivers to the LR-WPAN. As a research that is orthogonal and complementary to previous researches, we explore the implementation and practical performance evaluation of IEEE 802.15.4 MAC software. We implement the MAC software from the perspective of the networking stack, exploring the issues raised when the MAC software serves as a functional component in a complete networking stack consisting of MAC, network as well as well as application support layers. The performance is evaluated on a realistic experimental software environment integrated with operating system, networking stack, and applications.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.6
• /
• pp.1018-1023
• /
• 2001

Oleamide (cis-9-octadecenamide) is endogenous primary amide of fatty acid that is produced in small amounts in animal brains. It is known to induce sleep and to lower temperature by destroying the lipid plasma membrane structure of cells, thereby disclosing gap junction channels. To develop a new biological production method for oleamide, a screening program was conducted to isolate a microorganism producing oleamide. Among 1,500 soil microorganisms tested, KK90378 exhibited a potent positive reaction with Dragendoff`s reagent, used to detect the primary amide of oleamide. KK90378 was identified as a Streptomyces species based on cultural and morpohological characteristics, the presence of diaminopimelic acid in the cell wall, and the sugar patterns for the whole-cell extrat. Streptomyces sp. KK90378 produced oleamide 3 days after culture at $28^{\circ}C$, pH 7.2 A series of purification steps, including hexane extraction, silica gel column, and preparative thin layer chromatographies, were performed for the purification of oleamide. A spectrophotometric analysis using $^1H$, $^13C$-NMR, and GC-MS confirmed that the chemical structure of the purified oleamide was identical to that of authentic oleamide.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.5
• /
• pp.663-670
• /
• 2018

The present study focused on the production, characterization, and in vitro prebiotic evaluation of an exopolysaccharides (EPS) from Bacillus sonorensis MJM60135 isolated from ganjang (fermented soy sauce). Strain MJM60135 showed the highest production ($8.4{\pm}0.8g/l$) of EPSs compared with other isolates that were screened for EPS production based on ropy culture morphology. Furthermore, MJM60135 was cultured in 5 L of medium and the EPS was extracted by ethanol precipitation. The emulsification activity of the EPS was higher in toluene than in o-xylene. Fourier transform infrared spectroscopy analysis showed the presence of hydroxyl and carboxyl groups and glycosidic linkages. The isolated EPS contained mannose and glucose, as observed by thin-layer chromatography analysis of the EPS hydrolysate. Lactic acid bacteria (LAB) and pathogenic E. coli K99 and Salmonella enterica serovar Typhimurium were tested for their growth utilizing the EPS from B. sonorensis MJM60135 as the sole carbon source for its possible use as a prebiotic. All the tested LAB exhibited growth in the EPS-supplied medium compared with glucose as carbon source, whereas the pathogenic strains did not grow in the EPS-supplied medium. These findings indicate that the EPS from B. sonorensis MJM60135 has potential application in the bioremediation of hydrocarbons and could also be used as a prebiotic.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.6
• /
• pp.921-928
• /
• 2002

Microorganism producing extracellular CFTase was isolated from soil and designated as Bacillus polymyxa MGL21. The gene encoding the CFTase (cft) from B. polymyxa MGL21 was cloned and sequenced. The ORF of the cf gene was composed of 3,999 nucleotides, encoding a protein (1,333 amino acids) with a predicted molecular mass of 149,375 Da. Sequence analysis indicated that CFTase was divided into five distinct regions. CFTase contained three regions of repeat sequences at the N-terminus and C-terminus. The endo-inulinase region of homology (ERH) of CFTase was similar to that of Pseudomonas mucidolens endo-inulinase ($50\%$ identity, 259 amino acids). Furthermore, CFTase possessed a highly conserved core region, which is considered to be functional for the hydrolysis reaction of inulin. The cft gene was expressed in a His-tagged form in Escherichia coli cells, and the His-tagged CFTase was purified to homogeneity. The optimal temperature and pH for CFTase activity were found to be $50^{\circ}C$ and 9.0, respectively. The enzyme activity was completely inhibited by 10 mM $Ag^+\;and\;Cu^2+$. Thin-layer chromatography analyses indicated that CFTase catalyzed not only the cyclization reaction ut also disproportionation and hydrolysis reactions as well.

• Korean Journal of Materials Research
• /
• v.20 no.9
• /
• pp.457-462
• /
• 2010

Adsorption of a water molecule on a Si (001) surface and its dissociation were studied using density functional theory to study the distribution of -OH fragments on the Si surface. The Si (001) surface was composed of Si dimers, which buckle in a zigzag pattern below the order-disorder transition temperature to reduce the surface energy. When a water molecule approached the Si surface, the O atom of the water molecule favored the down-buckled Si atom, and the H atom of the water molecule favored the up-buckled Si atom. This is explained by the attractions between the negatively charged O of the water and the positively charged down-buckled Si atom and between the positively charged H of the water and the negatively charged up-buckled Si atom. Following the adsorption of the first water molecule on the surface, a second water molecule adsorbed on either the inter-dimer or intra-dimer site of the Si dimer. The dipole-dipole interaction of the two adsorbed water molecules led to the formation of the water dimer, and the dissociation of the water molecules occurred easily below the order-disorder transition temperature. Therefore, the 1/2 monolayer of -OH on the water-terminated Si (001) surface shows a regular distribution. The results shed light on the atomic layer deposition process of alternate gate dielectric materials, such as $HfO_2$.

• Korean Journal of Materials Research
• /
• v.27 no.11
• /
• pp.590-596
• /
• 2017

We demonstrated a CNT synaptic transistor by integrating 6,6-phenyl-C61 butyric acid methyl ester(PCBM) molecules as charge storage molecules in a polyimide(PI) dielectric layer with carbon nanotubes(CNTs) for the transistor channel. Specifically, we fabricated and compared three different kinds of CNT-based synaptic transistors: a control device with $Al_2O_3/PI$, a single PCBM device with $Al_2O_3/PI:PCBM$(0.1 wt%), and a double PCBM device with $Al_2O_3/PI:PCBM$(0.1 wt%)/PI:PCBM(0.05 wt%). Statistically, essential device parameters such as Off and On currents, On/Off ratio, device yield, and long-term retention stability for the three kinds of transistor devices were extracted and compared. Notably, the double PCBM device exhibited the most excellent memory transistor behavior. Pulse response properties with postsynaptic dynamic current were also evaluated. Among all of the testing devices, double PCBM device consumed such low power for stand-by and its peak current ratio was so large that the postsynaptic current was also reliably and repeatedly generated. Postsynaptic hole currents through the CNT channel can be generated by electrons trapped in the PCBM molecules and last for a relatively short time(~ hundreds of msec). Under one certain testing configuration, the electrons trapped in the PCBM can also be preserved in a nonvolatile manner for a long-term period. Its integrated platform with extremely low stand-by power should pave a promising road toward next-generation neuromorphic systems, which would emulate the brain power of 20 W.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2241-2247
• /
• 2007

A new series of chiral bent-shaped liquid crystals with an asymmetric central core based on 1,6- dihydroxynaphthalene and chiral terminal chain prepared from (S)-(?)-2-methyl-1-butanol, 1,6-naphthalene bis[4-(4-alkoxyphenyliminomethyl)]benzoates [N(1,6)-n-O-PIMB(n-2)*-(n-4)O (n = 8-11)] were synthesized. Their mesomorphic properties and phase structures were investigated by means of electro-optical, polarization reversal current, and second harmonic generation measurements in order to confirm the relationship between the molecular structure and phase structure. All odd n (n = 9 and 11) compounds, N(1,6)-9-O-PIMB7*-5O and N(1,6)-11-O-PIMB9*-7O exhibit antiferroelectric phase, whereas even n (n = 8 and 10) compounds was flexible, N(1,6)-10-O-PIMB8*-6O exhibits the ferroelectric phase but N(1,6)-8-O-PIMB6*-4O exhibits the antiferroelectric phase. These results come from the decrease of the closed packing efficiency within a layer and the lack of uniform interlayer interaction between adjacent layers, which were caused by the asymmetrical naphthalene central core. Thus, we concluded that the structure of central core as well as the terminal chain plays an important role for the emergence of particular polar ordering in phase structures.