• Animal cells and systems
• /
• v.6 no.4
• /
• pp.327-333
• /
• 2002

Among the silk glands in the black widow spider Latrodectus mactans, the ampullate one is the most predominant gland in both sexes, and is com-posed of three functional parts - excretory duct, storage ampulla and convoluted tail regions. This experiment was performed using mechanical pulling stimulation with electric motor equipment to reveal a correlation between silk usage and silk producing system in this poisonous spider. The mature secretory products in glandular epithelium are closely packed and appear as electron-opaque spherical vesicles. A part of the vesicles with fine fibrillar paracrystalline texture seems to store some proteins which will function at the time of final assembly into fibrils. Most of the secretory silk products which originated from the rough endoplasmic reticula of the glandular epithelial cells are grown by fusion with surrounding small vesi-cles. However, the Golgi complex does not seem to play an important role in this process of secretion. According to progressive maturation of secre-tory silk product, these granules are progressively filled with a fine fibrillar material, and thus appear much more electron-dense than those of earlier states. When the secretory product is extruded from the glandular cavity, the epithelium is rapidly changed to a thinner layer of tall columnar cells with less definitive cell membranes. After extruding there ave a few secre-tory droplets within these cells, thus causing this region to stain much lighter.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.20 no.1
• /
• pp.125-133
• /
• 1990

It is known that radiation therapy is a kind of treatment choices of the maxillofacial tumors. This study is designed to investigate the effects of irradiation on rat's tongue tissues as functional tissues which relate to taste, mastication, and pronunciation. 88 rats (Sprague Dawley branch, male) were divided into control group of 4 and experimental group of 84. Experimental group was singly exposed to Co-60 irradiation with 8, 13, 18 Gy in the head and neck region. Animals were sacrificed on 1 hour, 3 hours, 6 hours, 1day, 3 days, 7 days, and 28 days after the irradiation. The specimens were observed by histopathological examination employing H-E stain and Van-Gieson stain. The results were follows; 1. The tongue tissue were severely swollen on the 1 hour after irradiation, but gradually decreased in course of time. 2. The basal cells of epithelium of tongue proliferated at initial stage of irradiation, but gradually decreased. The Keratin layer were gradually increased. 3. The muscles within the tongue were severely degenerated at initial stage of irradiation, but gradually recovered almost normally. 4. The tissue changes after irradiation were gradually increased by the degree of irradiation.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.8
• /
• pp.2291-2296
• /
• 2013

An efficient carbon monoxide (CO) sensor was developed based on poly(3,4-ethylenedioxy)thiophenepoly(styrenesulfonate) (PEDOT:PSS) modified with a new pyrimidine-fused heterocyclic compound, bis(2-hydroxyphenyl)dihydropyrido[2,3-d:6,5-d]dipyrimidine-tetraone (B2HDDT). B2HDDT remains stable in the polymer matrix through interactions with functional groups of the polymer. It created prominent sites that captured CO gas, and the experimental parameters, including the amount of doped B2HDDT in the PEDOT:PSS film, were optimized. The sensor probe was also examined to verify its reliability for detecting CO in the presence of atmospheric gases in a discriminating manner. NMR, AFM, and FT-IR spectra were obtained to evaluate the structure and morphology of the B2HDDT-doped PEDOT:PSS (PEDOT:PSS/B2HDDT) film. The content of 35 vol % B2HDDT (7.0 mM) in PEDOT:PSS provided the largest response factor (${\Delta}R/R_o$) for the CO gas. The sensor response was reproducible, with a relative standard deviation < 5% (n = 5). The detection limit was determined to be $0.44{\pm}0.05$ vol %.

• International Journal of CAD/CAM
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2002

The STL or Stereolithography format, established by 3D systems, gathers the geometric data of the model in a number of triangular surfaces. It can be in ASCII or binary format, and is a de facto standard in the Rapid Prototyping (RP) world. RP has developed greatly over the last ten years. In particular, improvement in materials has meant greater part accuracy and strength, which in turn has increased the range of functional applications. Future applications of RP will focus on rapid tooling and direct manufacturing. Direct manufacturing in particular may see much benefit from the incorporation of color into models. For color RP, besides designing new hardware to add color into the prototypes, it is necessary to redefine the CAD software for adding and accurately positioning color onto the model. STL cannot effectively store this kind of information. Among the existing data file formats, VRML is an acceptable one that is complimentary to existing RP processes. This paper acts as a review to discuss several methods of using VRML for coloring model data. This paper will also discuss the problems occurred in coloring the layer contours of the RP model.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.1
• /
• pp.145-150
• /
• 2008

One of the unresolved questions in articular cartilage biomechanics is the magnitude of the dynamic modulus and tissue compressive strains under physiological loading conditions. The objective of this study was to characterize the dynamic modulus and compressive strain magnitudes of bovine articular cartilage at physiological compressive stress level and loading frequency. Four bovine calf shoulder joints (ages 2-4 months) were loaded in Instron testing system under load control, with a load amplitude up to 800 N and loading frequency of 1 Hz, resulting in peak engineering stress amplitude of ${\sim}5.8\;MPa$. The corresponding peak deformation of the articular layer reached ${\sim}27%$ of its thickness. The effective dynamic modulus determined from the slope of stress versus strain curve was ${\sim}23\;MPa$, and the phase angle difference between the applied stress and measured strain which is equivalent to the area of the hystresis loop in the stress-strain response was ${\sim}8.3^{\circ}$. These results are representative of the functional properties of articular cartilage in a physiological loading environment. This study provides novel experimental findings on the physiological strain magnitudes and dynamic modulus achieved in intact articular layers under cyclical loading conditions.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.6
• /
• pp.434-438
• /
• 2009

For the development of a new antidementia functional food or alternative drug using agricultural products, Job's tears (Coix lachrymajobi L.), which shows high acetylcholinesterase (AChE) inhibitory activity (55.1%) was selected and the extraction conditions of AChE inhibitor were optimized. AChE inhibitor of Job's tears was maximally extracted when it was treated with 60% methanol at $40^{\circ}C$ for 6 h. The AChE inhibitor of the methanol extracts was partially purified by systematic solvent extraction, thin layer chromatography, silica gel chromatography and reverse-phase HPLC and the partial purified AChE inhibitor with inhibitory activity ($IC_{50}$) of $0.608\;{\mu}g$ was obtained. The partial purified AChE inhibitor was soluble in methanol and hexane, and insoluble in water. Its maximum absorption spectra was 230 nm and also it was stable in the range of $30^{\circ}C$ and $70^{\circ}C$ and pH 4.0-8.0 for 1 h.

• Archives of Craniofacial Surgery
• /
• v.19 no.3
• /
• pp.222-226
• /
• 2018

A 70-year-old male with a history of diabetes mellitus, hypertension, and coronary stent insertion visited our hospital 7 days after biting his lower lip. Swelling and inflammation had worsened despite debridement and antibiotic treatment. On the 8th hospital day, fungal infection with Candida albicans and superimposed bacterial infection with Klebsiella pneumoniae were found on tissue culture. Extensive necrosis resulted in a defect of approximately 3/4 of the entire lower lip and a full-layer skin defect from the vermilion to the gingivobuccal sulcus at the right corner of the mouth. To correct drooling, incomplete lip sealing, and trismus, staged reconstruction was performed with consideration of cosmetic and functional features. The treatment process using staged reconstruction and antifungal treatment for an extensive lower lip defect caused by fungal stomatitis is described.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.4
• /
• pp.619-622
• /
• 2006

Biotransformation is a good tool to synthesize regioselective compounds. It could be performed with diverse sources of genes, and microorganisms provide a myriad of gene sources for biotransformation. We were interested in modification of flavonoids, and therefore, we cloned a putative O-methyltransferase from Bacillus cereus, BcOMT-2. It has a 668-bp open reading frame that encodes a 24.6-kDa protein. In order to investigate the modification reaction mediated by BcOMT-2, it was expressed in E. coli as a His-tag fusion protein and purified to homogeneity. Several substrates such as naringenin, luteolin, kaempferol, and quercetin were tested and reaction products were analyzed by thin layer chromatography (TLC) and high performance liquid chromatography (HPLC). BcOMT-2 could transfer a methyl group to substrates that have a 3' functional hydroxyl group, such as luteolin and quercetin. Comparison of the HPLC retention time and UV spectrum of the quercetin reaction product with corresponding authentic 3'-methylated and 4'-methylated compounds showed that the methylation position was at either the 3'-hydroxyl or 4'-hydroxyl group. Thus, BcOMT-2 transfers a methyl group either to the 3'-hydroxyl or 4'-hydroxyl group of flavonoids when both hydroxyl groups are available. Among several flavonoids that contain a 3'- and 4'-hydroxyl group, fisetin was the best substrate for the BcOMT-2.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.1
• /
• pp.5-12
• /
• 2004

The enhancement of adhesion for Cu film on polycarbonate (PC) surface with the $Ar/O_2$ gas plasma treatment and dc-bias sputtering was studied. The plasma treatment with this reactive mixture changes the chemical property of PC surface into hydrophllic one, which is shown by the variation of contact angle with surface modification. The micro surface roughness that also gives the high adhesive environment is increased by the $Ar/O_2$ gas plasma treatment. These results were observed distinctly from the atomic force microscopy (AFM). The negative substrate dc-bias effect for the Cu adhesion on PC was also investifated. Accelerated $Ar^{+}$ lons in sheath area of anode bombard the bare surface of PC during initial stage of dc bias sputtering. PC substrate. therefore, has severe roughen and hydrophilic surface due to the physical etching process with more activated functional group. As dc-bias sputtering process proceeds, morphology of Cu film shows better step coverage and dense layer. The results of peel test show the evidence of superiority of bias sputtering for the adhesion between metal Cu and PC.C.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.5
• /
• pp.845-851
• /
• 2008

TolC is an outer membrane porin protein and an essential component of drug efflux and type-I secretion systems in Gram-negative bacteria. TolC comprises a periplasmic $\alpha$-helical barrel domain and a membrane-embedded $\beta$-barrel domain. TdeA, a functional and structural homolog of TolC, is required for toxin and drug export in the pathogenic oral bacterium Actinobacillus actinomycetemcomitans. Here, we report the expression of the periplasmic domain of TdeA as a soluble protein by substitution of the membrane-embedded domain with short linkers, which enabled us to purify the protein in the absence of detergent. We confirmed the structural integrity of the TdeA periplasmic domain by size-exclusion chromatography, circular dichroism spectroscopy, and electron microscopy, which together showed that the periplasmic domain of the TolC protein family fold correctly on its own. We further demonstrated that the periplasmic domain of TdeA interacts with peptidoglycans of the bacterial cell wall, which supports the idea that completely folded TolC family proteins traverse the peptidoglycan layer to interact with inner membrane transporters.