• Advances in concrete construction
• /
• v.10 no.2
• /
• pp.161-169
• /
• 2020

This paper studies the influence of silica fume and Processed Quarry Fines (PQF) on the flexural behaviour of the reinforced concrete beams by experimental as well as numerical studies. The study has been shown that the incorporation of PQF can significantly increase the stiffness and the flexural strength of reinforced HPC beams. Also, the ultimate strength of specimens prepared with the 10% silica fume and 100% PQF are higher compared to conventional reinforced concrete specimen. Numerical analysis is performed to find the ultimate strength of HPC beams to compare with experimental results. Nonlinear behaviour of steel reinforcing bars and plain concrete is simulated using appropriate constitutive models and experimental results. The results indicate that the ultimate strength, deformed shape and crack patterns of reinforced HPC beams obtained through the Finite Element Analysis (FEA) are confirming with the experimental results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1991.10a
• /
• pp.15-20
• /
• 1991

High-strength concrete were produced with super-plasticizer, silica fume, fly ash and blast furnace slag powder. Topics investigated inclued mix proportion, and effects of unit weight of binder, W/C ratio, additive type on the physical properties of high-strength concrete. As the result, at 20% of silica fume, unit weight of binder 700kg/$\textrm{m}^3$ and W/C=0.24, 28days compressive strength of concrete was over 1,000kgf/$\textrm{cm}^2$. And in cases of blending with silica fume 10% and fly ash or slag 10%, it was able to produce economical high-strength concrete with 28 days strength similar to silica fume 20% only, and higher strength after 90days.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.217-220
• /
• 2004

Metakaolin is a cementitious material for producing high-strength concrete. This material is now used as substitute for silica-fume. In this paper, we did the durability test such as chloride ion diffusion, chemical attack. repeated freezing and thawing, carbonation. In the chloride ion diffusion test, according to the increase of substitute of metakaolin & silica-fume for binder, the diffusion coefficient is more reduced. And in the chemical attack test, according to the increase of substitute, the resistance is more excellent. In the other durability test, the concrete using metakaolin is also compared with those of the portland cement concrete and silica fume concrete. According to these tests, we recognized that metakaolin is able to be used as a substitute for silica-fume.

• Computers and Concrete
• /
• v.18 no.2
• /
• pp.155-163
• /
• 2016

This paper, proposes 20 models for predicting compressive strength of recycled aggregate concrete (RAC) containing silica fume by using gene expression programming (GEP). To construct the models, experimental data of 228 specimens produced from 61 different mixtures were collected from the literature. 80% of data sets were used in the training phase and the remained 20% in testing phase. Input variables were arranged in a format of seven input parameters including age of the specimen, cement content, water content, natural aggregates content, recycled aggregates content, silica fume content and amount of superplasticizer. The training and testing showed the models have good conformity with experimental results for predicting the compressive strength of recycled aggregate concrete containing silica fume.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.1
• /
• pp.45-51
• /
• 2021

The purpose of this study is to suggest the optimal shape for a local air ventilation system for fume removal, which is operated in a zinc galvanizing factory, and to propose the improvement plan for a ventilation system used in a zinc galvanizing factory through flow analysis. A part of the air sprayed by an air curtain goes out. It will be necessary to research the position of an air curtain, its spray angles, and its nozzle shape. In addition, additional research needs to be conducted on the shape of the fan installed before a hood in order to make it easy to induce fume. In a local air ventilation system, air is inhaled from the outside. The higher an inlet negative pressure is, the easier fume is removed. It was found that it was necessary to install an appropriate hole in the wall on the back of a push nozzle in order to reduce an inlet negative pressure.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2000.12a
• /
• pp.44-44
• /
• 2000

• Proceedings of the Safety Management and Science Conference
• /
• 2001.05a
• /
• pp.263-266
• /
• 2001

• Proceedings of the KWS Conference
• /
• 2000.10a
• /
• pp.254-255
• /
• 2000

• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.269-271
• /
• 2002

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.45-57
• /
• 2000

Results of environmental monitoring for 35 steel industry welders exposed to manganese and chromium fume were evaluated. Efficiency of respiratory protectors, welding face shields and local exhaust ventilation were also evaluated to establish more efficient preventive measures that can protect welders from occupational disease as related to welding fume. The results are as follows; 1. Total fume from $CO_2$ arc welding with mild steel occurred 1.5 to 2.2 times more than that from shielded metal arc welding. Chromium and nickel fume from welding with stainless steel occurred 27 to 59 times and 18 to 30 times, respectively, than those with mild steel. 2. Proportions of water-soluble chromium(VI) and insoluble chromium(VI) Compare to total chromium occurring from $CO_2$ arc welding with stainless steel were 10.5% and 8.7%, respectively, while those with mild steel were 57.1 to 63.2% and 31.6 to 38.1%, respectively. 3. The efficiencies of 4 types of respiratory protectors to reduce welding fume exposure were evaluated as 54.4 to 64.4%. 4. The reducing effect of head type welding face shield was 67.6%, and that of hand type welding face shield was 58.5%. The highest reducing effect was shown in air supply welding face shield as 99.2%, although it is not convenient to wear. 5. When welding face shield and respiratory protectors were worn together, the reducing efficiency increased to 79.0 to 87.5%. 6. When local exhaust ventilation was installed in workplace, the reducing efficiencies varied from 31.5 to 73.1% according to the types of welding.