• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제40권4호
• /
• pp.666-677
• /
• 2015

The importance of application traffic analysis for efficient network management has been emphasized continuously. Snort is a popular traffic analysis system which detects traffic matched to pre-defined signatures and perform various actions based on the rules. However, it is very difficult to get highly accurate signatures to meet various analysis purpose because it is very tedious and time-consuming work to search the entire traffic data manually or semi-automatically. In this paper, we propose a novel method to generate signatures in a fully automatic manner in the form of sort rule from raw packet data captured from network link or end-host. We use a sequence pattern algorithm to generate common substring satisfying the minimum support from traffic flow data. Also, we extract the location and header information of the signature which are the components of snort content rule. When we analyzed the proposed method to several application traffic data, the generated rule could detect more than 97 percentage of the traffic data.

• Economic and Environmental Geology
• /
• 제52권4호
• /
• pp.313-322
• /
• 2019

SAR (Synthetic Aperture Radar) remote sensing data is a very useful tool for near-real-time identification of landslide affected areas that can occur over a large area due to heavy rains or typhoons. This study aims to develop an effective algorithm for automatically delineating landslide areas from the polarimetric SAR data acquired after the landslide event. To detect landslides from SAR observations, reduction of the speckle effects in the estimation of polarimetric SAR parameters and the orthorectification of geometric distortions on sloping terrain are essential processing steps. Based on the experimental analysis, it was found that the IDAN filter can provide a better estimation of the polarimetric parameters. In addition, it was appropriate to apply orthorectification process after estimating polarimetric parameters in the slant range domain. Furthermore, it was found that the polarimetric entropy is the most appropriate parameters among various polarimetric parameters. Based on those analyses, we proposed an automatic landslide detection algorithm using the histogram thresholding of the polarimetric parameters with the aid of terrain slope information. The landslide detection algorithm was applied to the ALOS-2 PALSAR-2 data which observed landslide areas in Japan triggered by Typhoon in September 2011. Experimental results showed that the landslide areas were successfully identified by using the proposed algorithm with a detection rate of about 82% and a false alarm rate of about 3%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제22권2호
• /
• pp.651-658
• /
• 2021

Because bolts with anti-loosening coatings are used mainly for joining safety-related components in automobiles, accurate automatic screening of these coatings is essential to detect defects efficiently. The performance of the convolutional neural network (CNN) used in a previous study [Identification of bolt coating defects using CNN and Grad-CAM] increased with increasing number of data for the analysis of image patterns and characteristics. On the other hand, obtaining the necessary amount of data for coated bolts is difficult, making training time-consuming. In this paper, resorting to the same VGG16 model as in a previous study, transfer learning was applied to decrease the training time and achieve the same or better accuracy with fewer data. The classifier was trained, considering the number of training data for this study and its similarity with ImageNet data. In conjunction with the fully connected layer, the highest accuracy was achieved (95%). To enhance the performance further, the last convolution layer and the classifier were fine-tuned, which resulted in a 2% increase in accuracy (97%). This shows that the learning time can be reduced by transfer learning and fine-tuning while maintaining a high screening accuracy.

• Korean Journal of Remote Sensing
• /
• 제39권2호
• /
• pp.183-192
• /
• 2023

The remotely sensed data, such as satellite imagery and aerial photos, can be used to extract and detect some objects in the image through image interpretation and processing techniques. Significantly, the possibility for utilizing digital map updating and land monitoring has been increased through automatic object detection since spatial resolution of remotely sensed data has improved and technologies about deep learning have been developed. In this paper, we tried to extract plastic greenhouses into aerial orthophotos by using fully convolutional densely connected convolutional network (FC-DenseNet), one of the representative deep learning models for semantic segmentation. Then, a quantitative analysis of extraction results had performed. Using the farm map of the Ministry of Agriculture, Food and Rural Affairsin Korea, training data was generated by labeling plastic greenhouses into Damyang and Miryang areas. And then, FC-DenseNet was trained through a training dataset. To apply the deep learning model in the remotely sensed imagery, instance norm, which can maintain the spectral characteristics of bands, was used as normalization. In addition, optimal weights for each band were determined by adding attention modules in the deep learning model. In the experiments, it was found that a deep learning model can extract plastic greenhouses. These results can be applied to digital map updating of Farm-map and landcover maps.

• The KIPS Transactions:PartB
• /
• 제13B권1호
• /
• pp.63-70
• /
• 2006

In general, a corpus contains lots of linguistic information and is widely used in the field of natural language processing and computational linguistics. The creation of such the corpus, however, is an expensive, labor-intensive and time-consuming work. To alleviate this problem, annotation tools to build corpora with much linguistic information is indispensable. In this paper, we design and implement an annotation tool for establishing a Korean dependency tree-tagged corpus. The most ideal way is to fully automatically create the corpus without annotators' interventions, but as a matter of fact, it is impossible. The proposed tool is semi-automatic like most other annotation tools and is designed to edit errors, which are generated by basic analyzers like part-of-speech tagger and (partial) parser. We also design it to avoid repetitive works while editing the errors and to use it easily and friendly. Using the proposed annotation tool, 10,000 Korean sentences containing over 20 words are annotated with dependency structures. For 2 months, eight annotators have worked every 4 hours a day. We are confident that we can have accurate and consistent annotations as well as reduced labor and time.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• 제36S권8호
• /
• pp.88-100
• /
• 1999

Detecting human face and facial landmarks automatically in an image is as essential step to a fully automatic face recognition system. In this paper, we present a new approach to detect automatically face and its eyes of input image with scale and rotation variations of faces by using an intensity based template matching with a single log-polar face template. In a template-based matching it is necessary to normalize the scale changes and rotations of an input image to a template ones. The log-polar mapping which simulates space-variant human visual system converts scale changes and rotations of input image into constant horizontal and cyclic vertical shifts in the output plane. Intelligent use of this property allows us to shift of the candidate log-polar faces mapped at various fixation points of an input image to be matched to a template over the log-polar plane. Thus, the proposed method eliminates the need of adapting multitemplate and multiresolution schemes, which inevitably give rise to intensive computation involved to cope with scale and rotation variations of faces. Through this scale and rotation involved to cope with scale and method can lead to detecting face and its eyes simultaneously. Experimental results on a database of 795 images show over 98% detection rate.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제31권4호
• /
• pp.331-339
• /
• 2013

LiDAR has been one of the widely used and important technologies for 3D modeling of ground surface and objects because of its ability to provide dense and accurate range measurement. The objective of this research is to develop a method for automatic detection and modeling of railroad power lines using high density LiDAR data and RANSAC algorithms. For detecting railroad power lines, multi-echoes properties of laser data and shape knowledge of railroad power lines were employed. Cuboid analysis for detecting seed line segments, tracking lines, connecting and labeling are the main processes. For modeling railroad power lines, iterative RANSAC and least square adjustment were carried out to estimate the lines parameters. The validation of the result is very challenging due to the difficulties in determining the actual references on the ground surface. Standard deviations of 8cm and 5cm for x-y and z coordinates, respectively are satisfactory outcomes. In case of completeness, the result of visual inspection shows that all the lines are detected and modeled well as compare with the original point clouds. The overall processes are fully automated and the methods manage any state of railroad wires efficiently.

• Korean Journal of Ecology and Environment
• /
• 제39권2호통권116호
• /
• pp.257-264
• /
• 2006

In order to evaluate the application of Algae Online Analyzer (AOA), an instrument of automatic measurement of chlorophyll a concentration, was tested and compared with the acetone extraction method on the basis of microscopic counting of phytoplankton in field water (Paltang Reservoir). We simultaneously conducted AOA operation and extraction method with the same water sample, to compare both results of chlorophyll a measurement. Phytoplankton were enumerated by inverted microscope with the Sedgwick-Rafter chamber, and classified into the genus or species. According to the AOA measurement, the diatom most (83.6%) strongly contributed to the total chlorophyll a concentration, followed by chlorophyceae> cyanophyceae>cryptophyceae. Overall, the results of both AOA and extraction method showed a similar trend and significant correlation (r=0.87, n=302, p<0.001), however, there were some differences according to the season and species. In particular, the relationship between AOA Chl-a density of the diatom (r=0.73, p=0.010) and cyrptophyceae (.=0.83, p=0.00154) were siginificant, while chlorophyceae (r= -0.13) and cyanophyceae (r= -0.16) showed no clear relationship during the study period. Although we can not fully understand why there was difference between both mothods, AOA application for alarming algal bloom and water quality management during the algal bloom appears to be very relevant. However, the further study or technical upgrade of AOA measurement is required, especially in the case of low density of phytoplankton or species-specific measurement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제19권11호
• /
• pp.2597-2602
• /
• 2015

With the development of economy and improving of people's living standards, people dietary needs will be achieved from subsistence to high nutrition and from high nutrition to healthy transformation. Mushroom as a kind of highly nutritious, low fat, rich vitamin food has a great interest among the people. This makes the mushroom into a new sunrise industry and it gradually from pure manual cultivation develops toward the fully automatic factory. In the process of mushroom factory production, regulation of environmental factors directly affects the yield and quality of mushroom. In related to the methods of mushroom cultivation, the recent technologies apply the new technology such as sensors and IT convergence services. And then cultivating mushroom is managed effectively. This paper in order to solve the above problems and construct an effective mushroom growth environment using technology such as humidity sensor construct an environment that can automatically adjust the humidity. This environment has important significance to improve the level of automation mushroom production, increase yield per unit area and quality of mushroom, increase economic efficiency of mushroom production, and enhance the competitiveness of mushroom production.

• The Journal of Korean Academy of Prosthodontics
• /
• 제59권1호
• /
• pp.79-87
• /
• 2021

The digital workflow of optical impressions by the intraoral scanner and CADCAM manufacture of dental prostheses is actively developing. The complex process of traditional impression taking, definite cast fabrication, wax pattern making, and casting has been shortened, and the number of patient's visits can also be reduced. Advances in intraoral scanner technology have increased the precision and accuracy of optical impression, and its indication is progressively widened toward the long span fixed dental prosthesis. This case report describes the long span implant case, and the operator fully utilized digital workflow such as computer-guided implant surgical template and CAD-CAM produced restoration after the digital impression. The provisional restoration and customized abutments were prepared with the optical impression taken on the same day of implant surgery. Moreover, the final prosthesis was fabricated with the digital scan while utilizing the same customized abutment from the provisional restoration. During the data acquisition step, stl data of customized abutments, previously scanned at the time of provisional restoration delivery, were imported and automatically aligned with digital impression data using an 'A.I. abutment matching algorithm' the intraoral scanner software. By using this algorithm, it was possible to obtain the subgingival margin without the gingival retraction or abutment removal. Using the digital intraoral scanner's advanced functions, the operator could shorten the total treatment time. So that both the patient and the clinician could experience convenient and effective treatment, and it was possible to manufacture a prosthesis with predictability.