• Journal of the Optical Society of Korea
• /
• v.15 no.2
• /
• pp.111-117
• /
• 2011

Full-range spectral domain optical coherence tomography (SD-OCT) with a 1-${\mu}m$ band light source is shown here. The phase of the reference beam is continuously stepped while the probing beam scans the sample laterally (B-scan). The two dimensional spectral interferogram obtained is processed by a Fourier transform method to obtain a complex spectrum leading to a full-range OCT image. A detailed mathematical explanation of the complex conjugate resolving method utilized is provided. The system's measurement speed was 7.96 kHz, the measured axial resolution was $9.6{\mu}m$ in air and the maximum sensitivity 99.4 dB. To demonstrate the effect of mirror image elimination, In vivo human eye pathology was measured.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.5
• /
• pp.25-35
• /
• 2015

Handoff is a critical issue for seamless roaming in IEEE 802.11-based wireless networks. In order to provide real-time services, handoff mechanism must be provided. However, the IEEE 802.11 standard handoff is not appropriate to provide the services, because it is based on the full-scanning approach which spends too much time searching Access Point (AP). In this paper, we propose a new scheme, which can reduce the scanning latency. A station performs full-scanning operation for finding APs when it enters wireless networks for the first time. The station sends the scanned channel information to AP. AP maintains the neighbor channel table based on the information received from stations. A station performs the partial-scanning by using the table. Therefore, the proposed scheme can reduce the scanning latency.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.4
• /
• pp.179-188
• /
• 2023

PURPOSE. This in vitro study aimed to evaluate the performance of digital intraoral scanners in a completely edentulous patient with angled and parallel implants. MATERIALS AND METHODS. A total of 6 implants were placed at angulations of 0°, 5°, 0°, 0°, 15°, and 0° in regions #36, #34, #32, #42, #44, and #46, respectively, in a completely edentulous mandibular polyurethane model. Then, the study model created by connecting a scan body on the implants was scanned using a model scanner, and a 3D reference model was obtained. Three different intraoral scanners were used for digital impressions (PS group, TR group, and CS group, n = 10 in each group). The distances and angles between the scan bodies in these measurement groups were measured. RESULTS. While the Primescan (PS) impression group had the highest accuracy with 38 ㎛, the values of 104 ㎛ and 171 ㎛ were obtained with Trios 4 IOSs (TR) and Carestream 3600 (CS), respectively (P = .001). The CS scanner constituted the impression group with the highest deviation in terms of accuracy. In terms of dimensional differences in the angle parameter, a statistically significant difference was revealed among the mean deviation angle values according to the scanners (P < .001). While the lowest angular deviation was obtained with the PS impression group with 0.185°, the values of 0.499° and 1.250° were obtained with TR and CS, respectively. No statistically significant difference was detected among the impression groups in terms of precision values (P > .05). CONCLUSION. A statistically significant difference was found among the three digital impression groups upon comparing the impression accuracy. Implant angulation affected the impression accuracy of the digital impression groups. The most accurate impressions in terms of both distance and angle deviation were obtained with the PS impression group.

• Journal of Genetic Medicine
• /
• v.5 no.1
• /
• pp.41-46
• /
• 2008

Purpose : Fragile X syndrome (FXS) is the most common heritable cause of cognitive impairment. FXS is caused by hyperexpansion and hypermethylation of a polymorphic CGG trinucleotide repeat in the 5' untranslated region of the fragile X mental retadation-1(FMR1) gene. Combination of Southern blotting and simple polymerase chain reaction(PCR) amplification of the FMR1 repeat region is commonly used for diagnosis in females. To give a definite diagnosis in a female child suspected of having FXS, we carried out the molecular diagnostic test for FXS using the recently developed Abbott Molecular Fragile X PCR Kit. Methods : The PCR amplification of the FMR1 repeat region was performed using the Abbott Mdecular Fragile X PCR Kit. The amplified products were analyzed by size-separate analysis on 1.5% agarose gels and by DNA fragment analysis using Gene scan. Results : Agarose gel and Gene scan analyses of PCR products of the FMR1 repeat region showed that the patient had two heterozygous alleles with a normal 30 repeats and full mutation of >200 repeats whereas her mother had two heterozygous alleles with the normal 30 repeats and premutation of 108 repeats, suggesting that the premutation of 108 repeats in her mother may have led to the full mutation of >200 repeats in the patient. Conclusion : We diagnosed FXS in a female patient using a simplified molecular diagnostic test. This commercially available diagnostic test for FXS, based on PCR, may be a suitable alternative or complement method to Southern blot analysis and PCR analysis and/or methylation specific(MS)-PCR analysis for the molecular diagnosis of FXS in both males and females.

• Clinics in Shoulder and Elbow
• /
• v.21 no.3
• /
• pp.151-157
• /
• 2018

Background: Nonunion of lateral humeral condyle fracture causes cubitus valgus deformity. Although corrective osteotomy or osteosynthesis can be considered, there are controversies regarding its treatment. To evaluate elbow joint biomechanics in non-united lateral humeral condyle fractures, we analyzed the motion of elbow joint and pseudo-joint via in vivo three-dimensional (3D) kinematics, using 3D images obtained by computed tomography (CT) scan. Methods: Eight non-united lateral humeral condyle fractures with cubitus valgus and 8 normal elbows were evaluated in this study. CT scan was performed at 3 different elbow positions (full flexion, $90^{\circ}$ flexion and full extension). With bone surface model, 3D elbow motion was reconstructed. We calculated the axis of rotation in both the normal and non-united joints, as well as the rotational movement of the ulno-humeral joint and pseudo-joint of non-united lateral condyle in 3D space from full extension to full flexion. Results: Ulno-humeral joint moved to the varus on the coronal plane during flexion, $25.45^{\circ}$ in the non-united cubitus valgus group and $-2.03^{\circ}$ in normal group, with statistically significant difference. Moreover, it moved to rotate externally on the axial plane $-26.75^{\circ}$ in the non-united cubitus valgus group and $-3.09^{\circ}$ in the normal group, with statistical significance. Movement of the pseudo-joint of fragment of lateral condyle showed irregular pattern. Conclusions: The non-united cubitus valgus group moved to the varus with external rotation during elbow flexion. The pseudo-joint showed a diverse and irregular motion. In vivo 3D motion analysis for the non-united cubitus valgus could be helpful to evaluate its kinematics.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.64-71
• /
• 2024

The most critical aspect of full-arch prosthodontic treatment is evaluating whether the patient's vertical occlusal dimension is appropriate, and if necessary, restoring it through increasing vertical dimension. If the vertical occlusal dimension is too low, it can lead to reduced chewing efficiency, as well as not only aesthetic concerns but also potential issues like hyperactivity of muscles and posterior displacement of the mandible. This report is about the patient dissatisfied with pronunciation and aesthetics due to an inappropriate vertical occlusal dimension resulting from prior prosthetic interventions, underwent full-arch prosthodontic restoration treatment. Through the utilization of digital diagnostic apparatus, a comprehensive evaluation was undertaken for patient's vertical occlusal dimension, occlusal plane orientation, and the condition of prosthetic restorations. Through 3D facial scanning, the facial landmarks were discerned, and subsequently, the new occlusal plane was established. This provided the foundation for a digitally guided diagnostic wax-up. An elevation of 5 mm from the incisor was determined. Comprehensive dental rehabilitation was then executed for all remaining teeth, excluding the maxillary four incisors. The treatment protocol followed a systematic approach by initially creating implant-supported restorations on both sides of the dental arch to establish a stable occlusal contact. Subsequently, prosthetic restorations for the natural dentition were generated. Diagnostic and treatment planning were established through the utilization of facial scanning. This subsequently led to a reduction in treatment complexity and an expedited treatment timeline.

• Radiation Oncology Journal
• /
• v.18 no.4
• /
• pp.345-354
• /
• 2000

Purpose : Conventional radiation therapy Portal images gives low contrast images. The purpose of this study was to enhance image contrast of a linacgram by developing a low-cost image processing method. Materials and Methods : Chest linacgram was obtained by irradiating humanoid Phantom and scanned using Diagnostic-Pro scanner for image processing. Several types of scan method were used in scanning. These include optical density scan, histogram equalized scan, linear histogram based scan, linear histogram independent scan, linear optical density scan, logarithmic scan, and power square root scan. The histogram distribution of the scanned images were plotted and the ranges of the gray scale were compared among various scan types. The scanned images were then transformed to the gray window by pallette fitting method and the contrast of the reprocessed portal images were evaluated for image improvement. Portal images of patients were also taken at various anatomic sites and the images were processed by Gray Scale Expansion (GSE) method. The patient images were analyzed to examine the feasibility of using the GSE technique in clinic. Results :The histogram distribution showed that minimum and maximum gray scale ranges of 3192 and 21940 were obtained when the image was scanned using logarithmic method and square root method, respectively. Out of 256 gray scale, only 7 to 30$\%$ of the steps were used. After expanding the gray scale to full range, contrast of the portal images were improved. Experiment peformed with patient image showed that improved identification of organs were achieved by GSE in portal images of knee joint, head and neck, lung, and pelvis. Conclusion :Phantom study demonstrated that the GSE technique improved image contrast of a linacgram. This indicates that the decrease in image quality resulting from the dual exposure, could be improved by expanding the gray scale. As a result, the improved technique will make it possible to compare the digitally reconstructed radiographs (DRR) and simulation image for evaluating the patient positioning error.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.37 no.1
• /
• pp.13-20
• /
• 2017

A conventional phased array ultrasonic system offers the ability to steer an ultrasonic beam by applying independent time delays of individual elements in the array and produce an ultrasonic image. In contrast, full matrix capture (FMC) is a data acquisition process that collects a complete matrix of A-scans from every possible independent transmit-receive combination in a phased array transducer and makes it possible to reconstruct various images that cannot be produced by conventional phased array with the post processing as well as images equivalent to a conventional phased array image. In this paper, a basic algorithm based on the LLL mode total focusing method (TFM) that can image crack type flaws is described. And this technique was applied to reconstruct flaw images from the FMC dataset obtained from the experiments and ultrasonic simulation.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1663-1666
• /
• 2007

The finite element method is applied to analyze the deformation mechanisms in the closed-cell Al foam under the compression. The modeling of the real cellular structure proceeds with the concept of the reverse engineering. First of all, the small, $10{\times}\;10{\times}\;10mm^3$ sized specimens of the closed-cell Al foam are prepared. The micro focus X-ray CTsystem of SHIMADZU Corp. is used to scan the full structures of the specimens. The scanned structures are converted to the geometric surfaces and solids through the software for 3-D scan data processing, RapidFormTMof INUS Tech. Inc. Then the solid meshes are directly generated on the converted geometric solids for the finite element analysis. The large elastic-plastic deformation and 3-D contact problems for the Al cellular material are considered. The clear and successful analysis for the deformation mechanisms in the closed-cell Al foam is carried out through the comparison of the numerical results in this research with the referred experimental ones.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.6
• /
• pp.634-638
• /
• 2008

PURPOSE: The application of computer-aided technology to implant dentistry has created new opportunities for treatment planning, surgery and prosthodontic treatment, but the correct selection and combination of available methods may be challenging in times. Hence, the purpose of this case report is to present a combination of several computer-aided tools as approaches to manage complicated implant case. MATERIAL AND METHODS: A 47 year-old female patient with severe dental anxiety, high expectations, financial restrictions and poor compliance presented for a fixed rehabilitation. A CT scan with a radiographic template obtained with software (SimPlant, Materialize, Leuven, Belgium) was used for treatment planning. The surgical plan was created and converted into a stereolithographic model of the maxilla with bone-supported surgical templates (SurgiGuide, Materialise, Leuven, Belgium), that allowed for the precise placement of 7 implants in a severely resorbed edentulous maxilla. After successful osseointegration, an accurate scan model served as the basis for the fabrication of a one-piece milled titanium framework using the Procera (Nobel Biocare, Gothenburg, Sweden) technology. The final rehabilitation of the edentulous maxilla was rendered in the form of a screw-retained maxillary metal-reinforced resin-based complete prosthesis. RESULTS: Despite challenging circumstances, 7 implants could be placed without bone augmentation in a severely resorbed maxilla using the SimPlant software for pre-implant analysis and the SurgiGuide-system as the surgical template. The patient was successfully restored with a fixed full arch restoration, utilizing the Procera system for the fabrication of a milled titanium framework.