• Wind and Structures
• /
• 제32권2호
• /
• pp.143-159
• /
• 2021

The 246.8-m-tall Beijing Olympic Tower (BOT) is a new landmark in Beijing City, China. Its unique architectural style with five sub-towers and a large tower crown gives rise to complex dynamic characteristics. Thus, it is wind-sensitive, and a double-stage pendulum tuned mass damper (DPTMD) has been installed for vibration mitigation. In this study, a finite-element analysis of the wind-induced responses of the tower based on full-scale measurement results was performed. First, the structure of the BOT and the full-scale measurement are introduced. According to the measured dynamic characteristics of the BOT, such as the natural frequencies, modal shapes, and damping ratios, an accurate finite-element model (FEM) was established and updated. On the basis of wind measurements, as well as wind-tunnel test results, the wind load on the model was calculated. Then, the wind-induced responses of the BOT with the DPTMD were obtained and compared with the measured responses to assess the numerical wind-induced response analysis method. Finally, the wind-induced serviceability of the BOT was evaluated according to the field measurement results for the wind-induced response and was found to be satisfactory for human comfort.

• Structural Engineering and Mechanics
• /
• 제23권4호
• /
• pp.353-367
• /
• 2006

Two full-scale, precast, pretensioned box girders were subjected to shear-dominated loading, one under monotonic loads to failure and the other subjected to one-half million cycles of fatigue loads followed by monotonic ultimate loads. The number of cycles was selected to allow for comparison with previous research. The fatigue loads were applied in combination with occasional overloads. In the present study, fatigue loading reduced the shear capacity by only six percent compared to the capacity under monotonic loading. However, previous research on flexure-dominated girders subjected to the same number of repeated loads showed that fatigue loading changed the mode of failure from flexure to shear/flexure and the girder capacity dropped by 14 percent. The comparison of the measured data with calculated shear capacity from five different theoretical methods showed that the ACI code method, the compression field theory, and the modified compression field theory led to reasonable estimates of the shear strength. The truss model led to an overly conservative estimate of the capacity.

• 대한방사선치료학회지
• /
• 제33권
• /
• pp.137-144
• /
• 2021

목 적 : VMAT을 이용한 쇄골 상부 림프절을 포함하는 왼쪽 유방암 치료 시 X-Jaw를 나눈 치료계획과 기존 Full field VMAT 치료계획과의 선량분포를 비교 분석하여 X-Jaw split VMAT의 유용성을 평가하였다. 대상 및 방법 : 쇄골 상부 림프절을 포함하는 왼쪽 유방암 환자 10명을 대상으로 Vacuum cushion을 이용하여 CT simulation 하고 2 Arc Full field VMAT과 4 Arc X-Jaw split VMAT을 각각 치료계획 하였다. 각 치료계획은 처방 선량(Prescription dose)이 치료계획표적용적(Planning Target Volume, PTV)의 95% 이상 포함이 되고 주변 정상장기(Organ at risk, OAR)에 최소한으로 조사되도록 설계하였다. 이후 선량체적용적(Dose volume histogram, DVH)을 통해 PTV과 OAR의 대한 선량분석을 하였다. 결 과 : 10명의 환자의 Full field VMAT치료계획과 X-Jaw split VMAT치료계획의 데이터를 평균값으로 나타내어 비교하였다. 처방선량지수(conformity index, CI) 1.05±0.04, 1.04±0.03, 선량균질지수(homogeneity index, HI) 1.07±0.008, 1.07±0.009 로 두 치료계획 간 차이는 크지 않았다. OAR의 경우 왼쪽 폐의 V5 56.1±6.50%, 50.4±6.30%, V20 20.0±4.15%, 13.52±3.61% 로 Full field VMAT대비 X-Jaw split VMAT에서 V5이 10.0% V20은 32.6% 감소하였다. 심장의 V30은 3.68±1.85%, 2.23±1.52%, 평균 선량은 8.93±1.65 Gy, 7.67±1.52 Gy로 X-Jaw split VMAT에서 V30은 39.3%, 선량은 14.1% 감소하였다. 정상조직인 왼쪽 폐와 심장은 통계적 유의 수치인 p-value 0.05미만으로 나타났다. 결 론 : PTV의 체적이 크고 X Jaw의 길이가 15 cm 이상이 되는 쇄골 상부 림프절을 포함하는 왼쪽 유방암치료의 경우 X-Jaw split VMAT 치료계획은 기존의 치료계획과 동등한 HI와 CI로 유사한 PTV coverage를 유지 하면서 개선된 선량분포를 나타내 OAR인 폐와 심장 등의 방사선량을 줄일 수 있어 부작용을 줄이는데 효과적이라고 생각된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.1125-1130
• /
• 2007

This paper presents a maneuver analysis of a full-vehicle featuring electrorheological (ER) suspension and ER brake. In order to achieve this goal, an ER damper and an ER valve pressure modulator are devised to construct ER suspension and ER brake systems, respectively. After formulating the governing equations of the ER damper and ER valve pressure modulator, they are designed and manufactured for a middle-sized passenger vehicle, and their field-dependent characteristics are experimentally evaluated. The governing equation of motion for the full-vehicle is then established and integrated with the governing equations of the ER suspension and ER brake. Subsequently, a sky-hook controller for the ER suspension and a sliding mode controller for the ER brake are formulated and implemented. Control performances such as vertical displacement and braking distance of vehicle are evaluated under various driving conditions through computer simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.727-728
• /
• 2008

This paper deals with characteristic analysis of permanent magnet synchronous motor with full-ring magnet. The modeling of magnetic circuit is performed analytically. And then, analytical solution for open-circuit field distribution due to permanent magnet, back-EMF and torque are derived in terms of magnetic vector potential and two-dimensional polar coordinate system. The analytical results are validated extensively by finite element analyses. Finally, we performed experiments of permanent magnet synchronous motor with full-ring magnet.

• Wind and Structures
• /
• 제39권1호
• /
• pp.15-30
• /
• 2024

In this paper, detailed wind field data of the full path of typhoon "Bailu" were obtained based on site measurements. Typhoon "Bailu" made first landfall southeast of the Taiwan Strait with a wind speed of approximately 30 m/s near the center of the typhoon eye and a second landfall in Dongshang County in Fujian Province. The moving process is classified into 3 regions for analysis and comparison. Detailed analyses of wind characteristics including wind profile, turbulence intensity, gust factor, turbulence integral scale and wind power spectral density function at the full process of the typhoon are conducted, and the findings are presented in this paper. Wind speed shows significant dependence on both the direction of the moving path and the distance between the typhoon center and measurement site. Wind characteristics significantly vary with the moving path of the typhoon center. The relationship between turbulence intensity and gust factor at different regions is investigated. The integral turbulence scales and wind speed are fitted by a Gaussian model. Such analysis and conclusions may provide guidance for future bridge wind-resistant design in engineering applications.

• 한국정밀공학회지
• /
• 제22권1호
• /
• pp.73-81
• /
• 2005

A multi-purpose polariscope is developed by applying an electro-mechanical control system to a diffused transmission-type circular polariscope. A conventional polariscope is only good for manual control of optical elements. The new polariscope system is devised to be controlled through two stepping motors and two magnetic clutches. The developed system has both functions of a conventional linear- and circular-polariscope. The new polariscope can be used not only for the point-wise measurement using Tardy compensation technique but also for the full-field fringe analysis using conventional and/or phase measuring techniques, if applicable.

• 한국유체기계학회 논문집
• /
• 제4권4호
• /
• pp.7-15
• /
• 2001

Flow analysis was carried out for a double-suction centrifugal pump. Impeller-only models and a full pump model were used to simulate the velocity field and the pressure field of the pump. Heads and efficiencies were calculated with flow rates in order to obtain general performance of the pump. The calculation results were compared to the experimental data, and satisfactory results were obtained. Thus, it may be said that the CFD serves as a useful tool for pump designs.

• 한국생산제조학회지
• /
• 제24권1호
• /
• pp.15-22
• /
• 2015

In the present paper we report the results of a study into Friction Stir Welds (FSWs) made in 13 mm-thick 12%-Cr steel plates. Based on residual strains obtained by diffraction techniques, eigenstrain analysis was performed using the Eigenstrain Reconstruction Method (ERM), which is a novel methodology for the reconstruction of full-field residual strain and stress distributions within engineering components. Significant eigenstrain distributions were found at around Thermo-Mechanically Affected Zone (TMAZ) where the most severe plastic deformation was occurred. Microstructure analysis was used to elucidate this phenomenon showing that the grain structure in TMAZ was bent and not successfully recrystallised, resulting in severe deformation behaviour. The reconstructed residual strain distributions by the ERM agree well with the experimental results. It was found that the approach based on theory of eigenstrain is a powerful basis for reconstructing the full-field residual strain/stress distributions in engineering components and structures.

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 2000년도 한국생물과학협회 학술발표대회
• /
• pp.82.1-82
• /
• 2000

No Abstract, See Full Text