• 제목/요약/키워드: Full scale experiment

검색결과 237건 처리시간 0.028초

암반강도 및 압입깊이에 따른 디스크커터의 최적간격 산정을 위한 개별요소법 기반 수치해석 연구 (A numerical study on the optimum spacing of disc cutters considering rock strength and penetration depth using discrete element method)

  • 이상연;송기일;정주환
    • 한국터널지하공간학회 논문집
    • /
    • 제22권4호
    • /
    • pp.383-399
    • /
    • 2020
  • 디스크커터의 간격을 최적화하는 것은 TBM 커터헤드의 설계의 핵심요소로, TBM의 굴진성능을 좌우한다. 실대형 선형절삭시험은 디스크커터의 간격 산정을 위해 가장 신뢰성 및 정확도가 높은 시험으로 알려져 있으나 실대형 실험을 위해 경제적 및 시간적 비용이 소요되는 단점이 있다. 본 연구에서는 개별요소법 기반의 수치해석 연구를 통해 암반의 일축압축강도 및 압입깊이에 따른 비에너지-S/P비 간의 경향성을 분석하였고, 17인치 디스크커터의 최적 간격을 도출하였다. 수치해석모델의 적정성을 검토하기 위하여 디스크커터에 작용되는 회전력을 CSM 모델과 비교·검토하였다. 선형절삭시험에 대한 수치해석 결과, 디스크커터에 작용되는 회전력은 CSM 모델의 이론식으로부터 도출한 회전력과 유사한 것으로 분석되었다. 5가지(50 MPa, 70 MPa, 100 MPa, 150 MPa, 200 MPa)의 일축압축강도에 대한 수치해석 결과, 암반강도가 증가할수록 디스크커터의 최적간격의 범위는 감소하는 경향을 보였으며 80~100 mm범위에서 최소 비에너지를 보이는 것으로 확인되었다. 이는, 기존에 보고된 디스크커터의 최적 간격과 일치되는 경향으로써, 본 연구를 통해 산정된 디스크커터 간격을 밑받침한다.

띠 전개범식 안강망어구의 연구 (A Study for Designing the Zonal Canvas Type of Stow Net)

  • 김대안;고관서
    • 한국수산과학회지
    • /
    • 제18권1호
    • /
    • pp.1-7
    • /
    • 1985
  • 본연구에서는 전개장치를 띠모양의 소형 범포들로 구성하는 띠전개범식 안강망어구를 고안하여 재래의 그들을 이용한 1/3 모형어구 및 그물을 개량한 실물어구를 각각 제작하여 실험하였던 바, 다음과 같은 결과를 얻었다. 1. 재래의 안강망어구의 축척비 1/3인 모형어구의 총저항 R(kg)을 실물로 환산하면 $R=5.6{\times}10^{3}V^{l.5}$ 또는 $R=3.5\frac{d}{l}{\lambda}_b{\lambda}_l\;V^{1.5}$로 주어진다. 단, V 유속(m/sec), d는 그물실의 직경, l은 그물코 다리 한개의 길이, ${\lambda}_b$는 그물아궁이의 뻗친 둘레(m), ${\lambda}_l$은 그물의 뻗친 길이(m)이다. 2. 모형실험에서 망고는 유속에 따라 거의 일정하며 옆줄 길이의 $83\%$ 정도로 유지하였다. 3. 망폭은 유속의 증가에 따라 서서히 감소하여 유속 1m/sec 일 때 모형실험에서는 뜸줄길이의 $90\%$정도, 실물실험에서는 $95\%$정도 유지하였다. 4. 어구조작은 선미식 트롤어선으로 행한 결과 전개장치의 선미경사로 통과가 여의치 않았고 장망시 선미경사로상에서 뜸줄, 발줄 및 옆줄이 뒤로 쳐져 엉키는 현상이 일어났다.

  • PDF

하전작물 품종 및 재배기술의 1962년 이후 변천 (Changes in Variety and Cultural Practices of Soybean, Sweet Potato and Corn Since 1962 in Korea)

  • 홍은희;박근용
    • 한국작물학회지
    • /
    • 제27권4호
    • /
    • pp.462-469
    • /
    • 1982
  • Since 1962, varietal development and dissemination for summer upland crops have been actively initiated by the Crop Experiment Station, Office of Rural Development, Suweon, Korea. The major breeding objectives of soybeans have been to develop varieties which are early maturing, disease resistant, and adaptable to late planting for after-barley cropping. Development of eleven new soybean varieties including Hwangkeumkong, Jangyeobkong, Danyeobkong, and Kwangkyo has greatly increased the soybean yield throughout country. For com, after development of Hwangok #2, a synthetic, in early 1960's, nine corn hybrids-single crosses, double-crosses, and three-way crosses-such as Jecheon-ok, Hoengseong-ok, Kwangok, Suweon #19, etc., have been disseminated mainly to Kangweon province, a major corn producing area in Korea, and drew up the yield over 4 tons per hectare. The major breeding objectives of sweet potato have been to develop varieties which have high starch content and root yield. Hwangmi, Hongmi, and Shinmi are three sweet potato varieties developed and disseminated by the Crop Experiment Station, Office of Rural Development and are grown most widely in Korea. Most of researches on cultural practices of upland crops have begun on a full scale from early 1960's. In soybeans, for example, no fertilizer but for barley was applied although the effects of phosphate and potassium fertilizers were great on soybeans in after-barley soybean croppings. The effects of heavy application of phosphate and calcium fertilizers on soybeans in newly reclaimed soils were recognized. Recently a mixed fertilizer for soybean (N; 40, P:70, K:60 kg/㏊) was developed and sold for soybean growers. The optimum planting densities of 220, 000 plants/ha in full-season cropping and 330, 000 pts/ha in after-barley cropping of soybeans were known from repeated experiments. For higher yield, a means of cultural practices such as transplanting-pinching, direct planting-pinching, and hilling-up, etc., were developed along with barley-stubble planting with no tillage and integrated herbicide application for labour savings. For sweet potato, cultural practices for planting date, harvesting date, fertilizer, and planting density were fully established. For early marketing, a technique of vinyl-mulching on sweet potato has also fully developed. For com, planting density of 37, 000 pts/ha in early 1960's has been changed to 55, 000 pts/ha for grain production and 67, 000 pts/ha for silage. The amounts of fertilizers have also been changed from 120-120-120kg/ha (N-P-K) in early 1960s to 180-150-150 kg/ha. These increases in number of plants per unit area and fertilizer levels have resulted in greater production for both grain and silage. At the same time, the production techniques of F1 seeds have also improved.

  • PDF

수면하 보오텍스 유동과 자유표면과의 상호 작용에 관한 연구 (Numerical and Experimental Investigation on the Interaction of Subsurface Vortical Flows with a Free Surface)

  • 송무석
    • 대한조선학회논문집
    • /
    • 제30권2호
    • /
    • pp.76-85
    • /
    • 1993
  • 자유표면과 수면하 vortex 유동과의 상호작용으로 생기는 수면위의 특이 형상을 실험과 수치해석으로 얻어진 결과에 근거하여 논하였다. 먼저 2차원적인 실험이나 해석적인 연구로 이해될 수 있는 "striation"의 발생을 살펴 본다. "Scar"라 불리우는 striation과 수직한 형상은 2차원 vortex filament와 vortex pair 생성시 생겨나는 residual vortex의 상호작용으로 설명하였다. 간단하면서도 중요한 상호작용의 역학을 연구할 목적으로 vortex ring이 자유표면과 수직하게 충돌할 경우에 나타나는 현상들을 실험적으로 논하였고 이때 상호작용의 초기단계를 축대칭 문제로 하여 수치해석적으로 얻어진 결과와 비교하였다. 상호작용의 후기단계는 vortex reconnection을 포함하는 복잡한 과정인데 이때 수면에서의 짧은파 생성을 vortex ring의 수면과의 경사진 충돌로 설명하였다. 또한 위의 수면과 생성을 간단한 해석적 model로 재구성하여 비교해 보았다. 끝으로 수면위에 존재하는 오염물질이 수면하 vortex 유동에 미치는 영향을 수치해석적인 방법으로 free slip및 rigid wall 조건의 경우와 비교하여 살펴보았다.

  • PDF

소형탈선시뮬레이터를 이용한 1/5 축소대차의 주행안정성 시험 (A Running Stability Test of 1/5 Scaled Bogie using Small-Scaled Derailment Simulator)

  • 엄범규;강부병;이희성
    • 한국철도학회논문집
    • /
    • 제15권1호
    • /
    • pp.9-16
    • /
    • 2012
  • 철도차량의 탈선은 발생 시 대형사고로 이어질 수 있어, 철도차량의 주행안전 확보 문제는 철도운영기관 및 시설기관의 주요 현안 사항이다. 현재 대차의 동적 안정성 특성 시험은 대차 주행시험대라는 시험설비를 이용하여 시험을 하고 있다. 그러나 실물을 대상으로 한 실물규모의 주행시험대상에서의 동특성 시험은 시험 준비와 관련된 시험비용 및 시험소요 시간의 증가, 다양한 시험조건 설정 측면에서 어려움이 있다. 이러한 단점을 극복하고자 시험 편의성 측면에서 축소형 주행시험대를 활용하고 있으나 국내에서는 아직까지 축소대차, 축소트랙 등의 기초적인 수준의 연구가 진행되고 있다. 본 연구에서는 철도차량의 동적 거동을 예측하는 방법으로서 소형탈선시뮬레이터를 이용하여 상사기법이 적용된 1/5 축소대차의 주행안정성 시험에 대한 연구를 수행하였다. 또한, 시험데이터와 해석데이터를 비교·검증하기 위하여 상용해석프로그램을 이용하여 해석모델을 구현하고, 이를 이용하여 도향상에 따른 1/5 축소대차의 동적특성을 확인하였다.

전산처리를 통한 Linacgram의 화질개선 (Enhancement of Image Contrast in Linacgram through Image Processing)

  • 서현숙;신현교;이레나
    • Radiation Oncology Journal
    • /
    • 제18권4호
    • /
    • pp.345-354
    • /
    • 2000
  • 목적 : 방사선조사야를 확인하는 보편적인 방법인 linacgram은 저대조도(low contrast)의 영상을 보여주고 있어 정확한 영상을 확인하는데 문제점이 있다. 따라서 본 연구는 linacgram의 대조도를 높이는 저가형 확인방법을 모색하여 영상판독과 조사야 확인에 도움이 되고자 한다. 대상 및 방법: 인체모형을 사용하여 얻어진 필름 영상을 필름전용 스캐너(Diagnostic Pro)를 통해 Optical Density Scan, Histogram Equalized, Linear Histogram Based (HB), Linear Histogram Independent, Linear Optical Density (OD) Logarithmic 및 Power, Square Root scan 방식으로 디지털화 하였다. 각기 다른 방식으로 전산 입력된 영상의 신호분포도를 얻어 signal intensity를 비교한 후 pailette fitting 방식을 통해 영상을 재구성하였고 재구성된 영상을 비교 분석하였다. 실제 치료에서 얻어진 각 인체 부위별 linacgram도 동일한 방법으로 처리한 후 화질 개선도를 알아 보았다. 결과 : 인체모형을 통해 얻어진 영상의 신호 분포영역은 Logarlthmic 방식을 선택했을 때 최소값인 3192가 나왔고 Square Root방식을 사용했을 때 최대값인 21940가 나왔다. 이러한 값들을 모니터 상에서 구현할 수 있는 256 gray scale로 바꾸어 보았을 때 7$\~$30$\%$ 만 사용되어지고 있음을 알수 있었다. Pallette fitting 방식을 통하여 모니터의 최대표현 값인 256 계조도로 Gray Scale Expansion (GSE) 함으로써 모니터가 지원하는 8bit gray scale pallette의 전범위를 사용하여 대조도가 개선되었다. 임상에서 얻어진 각 인체 부위별 무릎관절, 두경부, 폐, 골반영상에서도 GSE 처리하여 얻어진 영상이 해부학적 구조를 판독하는데 도움이 죄었다. 결론 : GSE 영상의 재구성은 대조도를 증가 시킬뿐 아니라 인체내 관심부위의 농도분포를 별도로 재구성할 수 있으므로 이중방사선조사(double exposure)에 의해 발생되는 화질의 저하를 보정함으로써 화질 개선을 가능하게 하였다. Linacgram 화질 개선은 simulation image 및 치료계획에서 발생한 DRR과 multi-layer 중첩영상 분석에 사용할 수 있으며 영상 비교 시 치료부위의 신속하고 정밀한 확인을 가능하게 하였다.

  • PDF

전단접합 및 리브 플레이트로 보강한 H형 보-기둥 접합부의 내진성능에 관한 실험적 연구 (An Experimental Study on the Seismic Performance of Shear Connections and Rib Plate H Beam to Column Connections)

  • 오경현;서성연;김성용;양영성;김규석
    • 한국강구조학회 논문집
    • /
    • 제17권5호통권78호
    • /
    • pp.569-580
    • /
    • 2005
  • 기존 강구조 모멘트연성골조시스템의 기둥-보 접합부는 노스리지 지진과 고베 지진시 충분한 내진성능을 발휘하지 못하고 접합부에서 취성파괴가 발생하였다. 본 논문은 기존 접합부의 형상을 변화하여 H형강보 웨브의 고장력볼트 전단접합과 H형 플랜지의 리브보강 유무를 변수로 한 실대형 실험을 실시하였다. 실험목적은 보웨브의 2면전단접합으로 고장력 볼트수 감소와 시공성 향상을 기대하며, 리브플레이트 보강을 통해 내진성능을 향상시키고자 한다. H형강 보웨브의 2면전단접합과 리브플레이트로 보강한 접합부 실험결과, 기존 접합부보다 초기강성, 에너지 소산능력 및 소성회전능력이 높게 나타났으며, 내력상승률 및 변형능력은 전단탭의 위치로 인해 인장측과 압축측이 다소 차이를 보이고 있으나 전체적으로 우수한 내진성능을 나타냈다. 그리고 모든 시험체가 층간변위비 4%, 총소성회능력 약 0.029rad이상 및 접합부 최대내력이 원단면보 전소성모멘트의 약 130% 이상을 상회하여 중급모멘트연성골조이상의 설계가 가능하리라 사료된다.

심해 저층트롤망의 수중형상에 관한 모형실험 (A model experiment on the underwater shape of deepsea bottom trawl net)

  • 박광제;이주희;김형석;정순범;오택윤;배재현
    • 수산해양기술연구
    • /
    • 제42권3호
    • /
    • pp.134-147
    • /
    • 2006
  • A model experiment using circulation water channel was carried out to investigate the dynamic characteristics of bottom trawl net which can be used in sea mount of North Pacific. Hydrodynamic resistance and shape variation according to the flow velocity and angle of hand rope transformation for net were measured, and experimental value was analyzed as the value of full-scale bottom trawl net. The results summarized are as follows; At the $30^{\circ}$ of angle of hand rope to net, hydrodynamic resistance varied from 0.5kgf to 2.68kgf as the flow velocity increased between 0.31m/s and 0.92m/s, and formula of hydrodynamic resistance for the model net was $F_m=3.04\;{\cdot}\;{\upsilon}^{1.53}$. At the fixed angle of hand rope, Net height was low and Net width was high according to the increase of flow velocity, and in addition, vertical opening was low and Net width was high by the increase of angle of hand rope at the fixed flow velocity. At the $30^{\circ}$ of angle of hand rope to net, net opening area was $0.214m^2$ as flow velocity was 0.61m/s, and formula of net opening area for the model net was $S_m=-0.22{\upsilon}+0.35$. At the $30^{\circ}$ of angle of hand rope to net, catch efficiency seemed to be highest as $0.319m^3/s$ of filtering volume at the 0.76m/s(51kt's) of flow velocity. Shape variation of net showed the gradual laminar transform for the variation of flow velocity but there needed some improvements due to the occurrence of shortening at the ahead of wing net.

Effect of Ensiling Density on Fermentation Quality of Guineagrass (Panicum maximum Jacq.) Silage during the Early Stage of Ensiling

  • Shao, Tao;Wang, T.;Shimojo, M.;Masuda, Y.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제18권9호
    • /
    • pp.1273-1278
    • /
    • 2005
  • This study is to evaluate the effect of different levels of ensiling density on the fermentation quality of guineagrass silages during the early stage of ensiling. Guineagrass at the milky ripe stage was chopped and ensiled into a small-scale laboratory silo at two ensiling density levels (high density at 95 g/silo and low density at 75 g/silo). Three silos per level were opened after six ensiling periods (0.5, 1, 1.5, 2, 3 and 7 days of ensiling) and the fermentation qualities were analyzed. Within the initial 1.5 days of ensiling there were not significant (p>0.05) differences in the fermentation qualities between two density levels silages, and an almost constant pH and no or only small amounts of lactic acid, acetic acid and total volatile fatty acids were detected. However, the high density silage significantly (p<0.05) increased the rate and extent of fermentation after 1.5 days of ensiling, which was well reflected in significantly (p<0.05) faster and larger pH decline and lactic acid production at each elapsed time as compared with the low density silage. This resulted in significantly (p<0.05) lower finial pH and significantly (p<0.05) higher lactic acid content at the end of the experiment. Moreover, there was higher AA content relative to LA in both the H-D and L-D silages during the full fermentation course, and resulted in the AA-type silage. There were generally somewhat or significantly (p<0.05) higher acetic acid, volatile fatty acids and ammonia-N/total nitrogen in the high density silage than in the low density silage during the initial 3 days of ensiling. However, there were higher (p>0.05) ammonia-N/total nitrogen and significantly (p<0.05) higher butyric acid content in the low density silage at day 7 of ensiling. The silages of two density levels showed an initial increase in glucose between 0.5 and 1 day for the high density silage and between 1 and 1.5 days for the low density silage, respectively, thereafter showed a large decrease until the end of the experiment. There were not large differences (p>0.05) in ethanol content between the low density and high density silages that showed small amounts within initial 3 days of ensiling. However, the low density silage had a significantly (p<0.05) higher ethanol content than the high density silage at the end of experiment. From the above results it was suggested that the increase in ensiling density was an effective method to improve the fermentation quality, especially for tropical grasses.

DECOVALEX-2023 Task C 내 Step 0 벤치마크 수치해석 연구: OGS-FLAC을 활용한 열-수리-역학 복합거동 수치해석 (A Numerical Study on the Step 0 Benchmark Test in Task C of DECOVALEX-2023: Simulation for Thermo-Hydro-Mechanical Coupled Behavior by Using OGS-FLAC)

  • 김태현;박찬희;이창수;김진섭
    • 터널과지하공간
    • /
    • 제31권6호
    • /
    • pp.610-622
    • /
    • 2021
  • DECOVALEX 프로젝트는 고준위방사성폐기물 처분 시스템에서 발생하는 복잡한 열-수리-역학-화학적(THMC) 복합거동에 대해 수치해석을 통해 보다 더 깊이 이해하기 위해 수행되고 있는 대표적 국제공동 연구이다. 현재 DECOVALEX-2023이 7개 task를 기반으로 진행 중이며, 이 중 Task C는 Mont-Terri 지하연구시설에서 수행된 실규모 정치(FE) 시험을 대상으로 처분시스템 내 THM 복합거동을 모사하는 것을 목표로 하고 있다. 본 연구에서는 자체개발 해석 코드인 OGS-FLAC을 활용하여 수치해석 연구를 수행하였다. 수치모델에서는 FE 시험과 같이 일정 출력의 히터를 수평으로 위치시켰으며, 주어진 계측지점에서 압력 분포, 온도 변화, 역학적 변형을 계측하였다. 완충재 내부로 유입되는 유체 흐름은 완충재의 흡입력으로 인해 발생하였으며, 주변 영역에서는 열 팽창 및 열 압력이 지배적으로 작용함을 확인하였다. 해석 결과는 향후 타 참여 그룹 및 실험 결과와 비교 검증을 수행할 계획이다.