• Applied Microscopy
• /
• v.39 no.3
• /
• pp.253-260
• /
• 2009

GM-CSF is a multipotent growth factor, which also plays an important role during the process of wound healing. rrhGM-CSF was specifically produced from rice cell culture in our laboratory (Hanson Biotech Co., Ltd, Daejeon). The rrhGMCSF contains more oligosaccharide side chains than any other types of GM-CSF. This work was taken to evaluate the influence on wound healing of rrhGM-CSF in male golden hamsters. Full thickness skin defects of 9 mm in diameter were made in the back of hamsters, and 100 ${\mu}L$ ointment containing rrhGM-CSF 50 ${\mu}g/mL$ was applied. Control groups were given ointment without rrhGM-CSF. The wound sizes were relatively reduced and skin was well regenerated in the experimental group compared with the control group. Structurally, reepithelialization and architecture of the skin following injury were well accomplished in the experimental group. And also, positive reaction of PCNA of the skin following injury was more prominent in rrhGM-CSF containing ointment treatment group. Since this type of GM-CSF has highly glycosylated side chains, the effectiveness might be retain longer and stable, regarding acceleration of wound healing in the animal model. The present study has important implications for further development of the therapeutic manipulation of wound healing using rrhGM-CSF.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.181-189
• /
• 2017

This study examines whether the variables used in the Unified Theory of Acceptance and Use of Technology(performance expectancy, effort expectancy, social influence, and facilitating conditions) is applicable to continuous usage of uTradeHub at a time of expansion in the use of uTradeHub. In addition, the role of user satisfaction(mediating effect) and CEO support(interaction effect) in the relationship is identified attempting to provide basic data to help uTradeHub management strategy establishment. A total of 101 valid responses collected through questionnaires were used for empirical analysis(using SPSS 24.0), and the results are as follows. First, for the effect of the integration technology acceptance factor on user satisfaction(H1), only performance expectancy, effort expectancy, and social influence were significant, but facilitating conditions was not significant. Second, for the effect of user satisfaction on the continued use of uTradeHub(H2), there was a significant result. Third, the mediation effect on verification of user satisfaction(H3) was full where performance expectancy, effort expectancy, and social influence prompted continuous usage through user satisfaction. Fourth, for interactive effect verification of CEO support(H4), an interaction effect was shown only in the influence relationship of performance expectancy and social influence on user satisfaction.

• Smart Media Journal
• /
• v.5 no.2
• /
• pp.15-23
• /
• 2016

In this paper we propose the depth-poselets using body-part-poses and also propose the method to recognize the gesture. Since the gestures are composed of sequential poses, in order to recognize a gesture, it should emphasize to obtain the time series pose. Because of distortion and high degree of freedom, it is difficult to recognize pose correctly. So, in this paper we used partial pose for obtaining a feature of the pose correctly without full-body-pose. In this paper, we define the 16 gestures, a depth image using a learning image was generated based on the defined gestures. The depth poselets that were proposed in this paper consists of principal three-dimensional coordinates of the depth image and its depth image of the body part. In the training process after receiving the input defined gesture by using a depth camera in order to train the gesture, the depth poselets were generated by obtaining 3D joint coordinates. And part-gesture HMM were constructed using the depth poselets. In the testing process after receiving the input test image by using a depth camera in order to test, it extracts foreground and extracts the body part of the input image by comparing depth poselets. And we check part gestures for recognizing gesture by using result of applying HMM. We can recognize the gestures efficiently by using HMM, and the recognition rates could be confirmed about 89%.

• International Journal of Highway Engineering
• /
• v.11 no.1
• /
• pp.165-175
• /
• 2009

With the current move towards adopting mechanistic-empirical concepts in the design of pavement structures, state-of-the-art mechanistic analysis methodologies are needed to determine accurate pavement responses, such as stress, strain, and deformation. Previous laboratory studies of pavement foundation geomaterials, i.e., unbound granular materials used in base/subbase layers and fine-grained soils of a prepared subgrade, have shown that the resilient responses followed by nonlinear, stress-dependent behavior under repeated wheel loading. This nonlinear behavior is commonly characterized by stress-dependent resilient modulus material models that need to be incorporated into finite element (FE) based mechanistic pavement analysis methods to predict more realistically predict pavement responses for a mechanistic pavement analysis. Developed user material subroutine using aforementioned resilient model with nonlinear solution technique and convergence scheme with proven performance were successfully employed in general-purpose FE program, ABAQUS. This numerical analysis was investigated in predicted critical responses and domain selection with specific mesh generation was implemented to evaluate better prediction of pavement responses. Results obtained from both axisymmetric and three-dimensional (3D) nonlinear FE analyses were compared and remarkable findings were described for nonlinear FE analysis. The UMAT subroutine performance was also validated with the instrumented full scale pavement test section study results from the Federal Aviation Administration's National Airport Pavement Test Facility (FAA's NAPTF).

• Journal of Korean Society of Steel Construction
• /
• v.19 no.5
• /
• pp.515-526
• /
• 2007

In this study, the models and methods for the safety assessment of Steel-Concrete Hybrid Cable-Stayed Bridge, which consists of steel composite girder and concrete girder erected by the FCM(Free Cantilever Method) and FSM(Full Staging Method) are proposed for the assurance of structural safety and the prevention against bridge collapse during construction. By the structural reliability approach that reasonably considers the uncertainties associated with the resistance and the load effect, the resistance and the load distribution characteristics of Steel-Concrete Hybrid Cable-Stayed Bridgeare defined and the strength limit state equations of permanent structures and temporary structures during construction are suggested. An AFOSM algorithm and MCS technique are used for the reliability analysis of cables, pylons, girders, steel-concrete conjunction part and temporary bents. Also, component reliability analyses are performed at the construction stages based on the structural system model. To demonstrate their rationality and practicality, the proposed models and approaches are applied to a real bridge. The sensitivity analyses of main parameters are performed in order to identify the critical factors that control the safety of similar bridges. As a result, it may be stated that the proposed models could be implemented as a rational and practical approach for the safety assessment of Steel-Concrete Hybrid Cable-stayed bridges erected by FCM and FSM during construction.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.323-328
• /
• 2010

Purpose: Adipose-derived stromal cells (ADSCs) are multipotent cells that have been found to promote wound healing through the process of angiogenesis and reepithelialization. Generally, it is well known that the antigenicity of ADSCs doesn't affect stem cell therapy. In this study, we investigated the effect of allogeneic ADSCs in the wound healing process by applying allogeneic ADSCs on the wound healing splint model of mice. Methods: Adipose tissue was harvested from the epididymal fat pads of BALB/c and C57BL/6 mice. Twenty four mice BALB/c were divided into three groups; control, isogeneic, and allogeneic groups. Two full thickness defects with 6 mm diameters were created on the back of BALB/c mice. $1{\times}10^6$ ADSCs from BALB/c mice were applied on the isogeneic group. In the allogeneic group, ADSCs from the C57BL/6 mice were applied. No cells were applied to the control group. The sizes of the wounds were evaluated in 3, 5, 7, 10, and 14 days after the wounds were applied, and tissues were harvested in 7 and 14 days for histological analysis. Results: Wound healing rates had showed significant increase in 10, and 14 days when the isogeneic group was compared to the control group, but the allogeneic group showed significantly decrease compared to the isogeneic group (p<0.05). Histological scores in the isogeneic group were significantly high, but significantly lower in the allogeneic group when compared to the isogeneic group in 2 weeks (p<0.05). In the isogeneic group, thick inflammatory cell infiltration with abundant capillaries were observed in 1 week, and thick epithelium with many large capillaries were observed in 2 weeks. Conclusion: When isogeneic ADSCs were applied to wounds, they presented a faster wound healing rate compared to controls and the allogeneic group. Unlike general stem cell therapy, these findings suggest that cell therapy targeted at enhancing wound healing may benefit from the use of ADSCs with identical antigenicity, as opposed to allogeneic or xenogenic ADSCs.

• International Journal of Quality Innovation
• /
• v.8 no.1
• /
• pp.40-75
• /
• 2007

In the early industrial age which with high intensity of machine and labor, using financial measurement index was good enough to tie in company's mechanization and philosophy of management and been in efficiency. But being comply with "New Economic age," a new economic environment is full of knowledge and information, the enterprise competition had changed from tangible assets, plants to intangible innovation ability of knowledge. As recognizing the new tendency by enterprise, they value gradually the growth and influence from learning. Practice of organization learning not only needs firm structure and be in coordination with both hardware and software, but also needs an affect measurement model to offer enterprise to estimate learning performance. It's a good instrument of financial performance measure mold in the past years, But it's for measuring the past, couldn't formulate enterprise trend to future, hard to estimate investment for future, such as development of products, organization learning, knowledge management etc, as which intangible assets and knowledge ability just the key factors of being win around competition environment in the future. In 1992, Kaplan and Norton brought up Balance Scorecard (BSC) on Harvard Business Review, as an instrument helping enterprise to measure performance, which is being considered to be a most influence management instrument. It added non-financial index such as customer, internal process and learning growth besides traditional financial index, as offering enterprise an index to measure and manage intangible assets and intellectual property. As being aware of organization learning is hard to be ignored in the new economic age, this research is based on learning and growth of BSC, and citing one national material company try to let the most difficult measurement performance of organization learning, to be estimate through BSC, analyze of factor and individual case, to discuss the company how to make the related strategy and vision of organization learning to develop learning and growth of the structure of BSC, subject the matter of out put factors to be discussed, and measure the outcomes as a result of research. The research affect offers (1) the base implement procedure of carrying out BSC; (2) the reference of formulating measurement index while enterprise using BSC to estimate performance of organization learning; (3) the possibility bottleneck maybe forcing while carrying out BSC, to be an improvement or preventive for enterprise.

• Korean Journal of Microbiology
• /
• v.47 no.4
• /
• pp.295-301
• /
• 2011

Aquaporin is a water channel protein, which is classified as Major Intrinsic Protein (MIP), found in almost all organisms from bacteria to human. To date, more than 200 members of this family were identified. There are two major categories of MIP channels, orthodox aquaporins and aquaglyceroporins, which facilitate the diffusion across biological membranes of water or glycerol and other uncharged compounds, respectively. The full genome sequencing of various fungal species revealed 3 to 5 aquaporins in their genome. Although some functions of aquaporins found in yeast were characterized, however, no functional characteristics were studied so far in filamentous fungi, including Aspergillus sp. In this study, one orthodox aquaporin homolog gene, aqpA, and four aquaglyceroporin homologs, aqpB-E, in a model filamentous fungus Aspergillus nidulans were identified and the function of the aqpA gene was characterized. Knock-out of the aqpA gene didn't show any obvious phenotypic change under the osmotic stress, indicating that the function of the gene does not involved in the osmotic stress response or the function could be redundant. However, the mutant showed antifungal susceptibility resistance phenotype, suggesting that the function of the aqpA gene could be involved in sensing the antifungal substances rather than the osmotic stress response.

• Korean Journal of Organic Agriculture
• /
• v.22 no.3
• /
• pp.445-455
• /
• 2014

The pear sucker (Cacopsylla pyricola) is the most important insect pest in Korea. The hatching rates of overwintered adults laid eggs were observed at 10, 13, 18, and $22^{\circ}C$. The liner model was draw as Y=0.00277X+0.00146(Y=developmental rate, X=temperature) about temperature and developmental rate to eggs. The developmental threshold temperature to eggs was assumed about $-0.83^{\circ}C$. The egg hatching timing over 50% as the accumulated temperature by day maximum temperature $6^{\circ}C$ over from 1st February in 2008, 2009 and 2011 was 429.7, 417.6, and 424.3 degree $^{\circ}C$, respectively, was 3 to 7days before full blooming in pear orchard. On the other hand, the abamectin 1.8EC, lime sulfer, machine oil and 13 kinds of eco-friendly materials were not shown the control effect to the eggs. To mixed stage of pear sucker, the eco-friendly materials over 90% control value were 4 kinds such as a mixture of Azadiractin A+B, Nimbin, Salanin, Meliantriol and Vepol after twice application as 21st May and 5th June in pear growing season, in 2012.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.319-330
• /
• 2016

Recently, 3D printing technology has been applied to make a concept model and working mockup of an industrial application. On the other hand, this technology has limited applications in industrial products due to the materials and reliability of the 3D printed product. In this study, the components of a full cord switch module are proposed as a case of a 3D printed component that can be used as a substitute for a short period. These are hub-driven and lever lockup components that have the structural characteristics of breaking down frequently in the emergency operating status. To ensure the structural strength for a substitute period, research of structure optimization was performed because 3D printing technology has a limitation in the materials used. After optimizing the structure variables of the hub-driven component, reasonable results can be drawn in that the safety factors of the left and right switching mode are 1.243 (${\Delta}153.67%$) and 3.156 (${\Delta}404.96%$). The lever lockup component has a structural weak point that can break down easily on the lockup-part because of a cantilever shape and bending moment. The rib structure was applied to decrease the deflection. In addition, optimization of the structural variables was performed, showing a safety factor of 7.52(${\Delta}26%$).