• Journal of Plant Biotechnology
• /
• v.41 no.2
• /
• pp.81-88
• /
• 2014

Salt cress (Thellungiella halophila or Thellungiella parvula), species closely related to Arabidopsis thaliana, represents an extremophile adapted to harsh saline environments. To isolate salt-tolerance genes from this species, we constructed a cDNA library from roots and leaves of salt cress plants treated with 200 mM NaCl. This cDNA library was subsequently shuttled into the destination binary vector [driven by the cauliflower mosaic virus (CaMV) 35S promoter] designed for plant transformation and expression via recombination- assisted cloning. In total, 305,400 pools of transgenic BASTA-resistant lines were generated in Arabidopsis using either T. halophila or T. parvula cDNA libraries. These were used for functional screening of genes involved in salt tolerance. Among these pools, 168,500 pools were used for primary screening to date from which 7,157 lines showed apparent salt tolerant-phenotypes in the initial screen. A secondary screen has now identified 165 salt tolerant transgenic lines using 1,551 (10.6%) lines that emerged in the first screen. The prevalent phenotype in these lines includes accelerated seed germination often accompanied by faster root growth compared to WT Arabidopsis under salt stress condition. In addition, other lines showed non-typical development of stems and flowers compared to WT Arabidopsis. Based on the close relationship of the tolerant species to the target species we suggest this approach as an appropriate method for the large-scale identification of salt tolerance genes from salt cress.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.8
• /
• pp.866-871
• /
• 2006

The nutrient recovery in phosphate crystallization process was investigated by using laboratory scale uptlow reactors, adopting sequencing batch type configuration. The industrial waste lime was used as potential cation source with magnesium salt($MgCl_2$) as control. The research was focused on its successful application in a novel integrated sludge treatment process, which is comprised of a high performance fermenter followed by a crystallization reactor. In the struvite precipitation test using synthetic wastewater first, which has the similar characteristics with the real fermentation effluent, the considerable nutrient removal(about 60%) in both ammonia and phosphate was observed within $0.5{\sim}1$ hr of retention time. The results also revealed that a minor amount(<5%) of ammonia stripping naturally occurred due to the alkaline(pH 9) characteristic in feed substrate. Stripping of $CO_2$ by air did not increase the struvite precipitation rate but it led to increased ammonia removal. In the second experiment using the fermentation effluent, the optimal dosage of magnesium salt for struvite precipitation was 0.86 g Mg $g^{-1}$ P, similar to the mass ratio of the struvite. The optimal dosage of waste lime was 0.3 g $L^{-1}$, resulting in 80% of $NH_4-N$ and 41% of $PO_4-P$ removal, at about 3 hrs of retention time. In the microscopic analysis, amorphous crystals were mainly observed in the settled solids with waste lime but prism-like crystals were observed with magnesium salt. Based on mass balance analysis for an integrated sludge treatment process(fermenter followed by crystallization reactor) for full-scale application(treatment capacity Q=158,880 $m^3\;d^{-1}$), nutrient recycle loading from the crystallization reactor effluent to the main liquid stream would be significantly reduced(0.13 g N and 0.19 g P per $m^3$ of wastewater, respectively). The results of the experiment reveal therefore that the reuse of waste lime, already an industrial waste, in a nutrient recovery system has various advantages such as higher economical benefits and sustainable treatment of the industrial waste.

• Journal of muscle and joint health
• /
• v.8 no.1
• /
• pp.65-85
• /
• 2001

Osteoporosis is the disease that is the most controversial issue with the aging tendency in 1990. It is an important issue in dealing with the health management for women in middle life. This study is designed to determine the relationships among the level of the knowledge of osteoporosis, the health promoting behaviors and the quality of life. The test has conducted a questionnaire survey of women with osteoporosis. This is a study that focused an interrelation of above issues and its purpose is to gain a foundation of a nursing intervention that can help to improve the qualify of life of an osteoporosis patients. The method of collecting data is collecting a questionnaire survey, individual interviews and records and the collected 123 questionnaire surveys are utilized for an data analysis. Questionnaire surveys are conducted in K and S Universities infirmaries and K general hospital in Seoul and C and J general hospital in near Seoul area from Sep. 27th to Nov. 4th, 2000. The instruments of this study were as follows: Yoon's used the revised and supplemented instrument to test the level of the knowledge of osteoporosis and she referred to the substance of Cassells & Knotz. Lee's revised and supplemented the instrument called Health Promoting Life style Profile that were invented by Walker, Sechrist & Pender and she used it to test the health promoting behaviors with the questionnaires added by this researcher. They are not related to the quality of life but relevant to the patients. Ro's tested the quality of life with the instrument that was invented by herself. The results of this study were as follows. 1. The general characteristics of this study subjects showed that the age of the patients was concentrated from 50 to 59. The periods after menopause was mainly from 6 to 10 years. Subjective symptoms that patients usually complain were musculoskelectal symptoms. 2. The results of measuring the level of the knowledge of osteoporosis, the health promoting behaviors and the quality of life were following. The level of the knowledge was the score 19.83 and it was above middle score out of the score 27 as full marks. In the result of the health promoting behaviors test, the score average was 2.58 with 4 point rating scale and it was about middle score. The quality of life test showed that average score was 2.92 with 5 point rating scale and it indicated that the quality was also around middle score. 3. The statistical test in the activities for promoting health according to the general characteristics of the patients showed that only monthly income has statistically significant difference(F-4.761, p=.004). The same test for the qualify of life indicated that the quality of life was higher from 1 to 5 years after menopause but it was not meaningful statistically. 4. In the correlation among the level of knowledge of osteoporosis, the health promoting behaviors and the qualify of life of the patients, showed a relationship between the health promoting behaviors and the qualify of life. The higher the health promoting behaviors, it was also higher the quality of life. But it was statistically significant with significant positive correlation.

• Journal of the Korean Arthroscopy Society
• /
• v.12 no.3
• /
• pp.172-179
• /
• 2008

Purpose: To evaluate the functional and structural results of arthroscopic double-row repair using combined knot-tying and knotless suture anchors in rotator cuff tears. Materials and Methods: From March 2006 to June 2007, twenty-one patients (15 males, 6 females; mean age 55.6 years; range 48 to 67) were included who underwent arthroscopic double-row repair for full-thickness tears of the rotator cuff following conservative treatment for a mean of 6.5 months (range 3 to 11). The tear size was carefully inspected arthroscopically and we found 2 small, 13 medium and 6 large-sized rotator cuff tears, with a mean tear size of 2.5cm(range 1.8 to 3.2). The repair constructs were consisted of horizontal mattress sutures using conventional knot-tying suture anchors medially and simple suture at the same level of medial row stitch with Bioknotless RC anchors (DePuy Mitek, Norwood, MA) as lateral row. Clinical and functional evaluations were made according to the range of motion, the ASES, UCLA scale and the isokinetic strength testing. Postoperative cuff integrity was determined through magnetic resonance imaging. The mean follow-up was 15 months (range 13 to 24). Results: The average clinical outcome scores and strength were all improved significantly at the time of the final follow-up (p < 0.01). Nineteen patients (90%) were satisfied with the result of the treatment. In 17 of 21 patients (81%) were judged to reveal healed tendon on magnetic resonance imaging at a mean of 7 months postoperatively. There were no significant functional differences according to the preoperative tear size (p<0.01), but large-sized tear shows less favorable structural results in 3 out of 6 cases(50%). Conclusion: Our results document the usefulness and variability of arthroscopic double-row rotator cuff repairs comparable to the results of the other types of double-row repairs.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.10 no.1
• /
• pp.100-112
• /
• 1999

Objective：In life-long disabilities like autism and mental retardation, the authors thought that it is important for clinician to consider the quality of life of a primary caregiver for long-term management and prognosis. This study was to investigate the factors of children and family environment affecting the quality of life and depression in mothers with autistic and/or mentally retarded children. Methods：41 autistic and/or mentally retarded children aged 5-12 years with their mothers were surveyed from September, 1998 to January, 1999, with K-CBCL, K-BDI, K-FES, and K-SBQOL scale and compared with data from 35 normal control subjects. Results：1) Total K-BDI and K-SBQOL scores of mothers with mentally handicapped children were significantly poorer than the scores of normal control group. Independence, intellectual/cultural orientation and active recreation subscales of K-FES in mentally handicapped children were significantly decreased than those in normal control group. 2) Total K-BDI score of mothers with mentally handicapped children was correlated with their children’s behavioral problems, especially internalizing and thought symptoms, and with family cohesion, expressiveness, conflict and independence. 3) Totol K-SB quality of life score of mothers with mentally handicapped children was correlated with their children’s behavioral problems, especially attention problem, and with family cohesion, conflict, independence, intellectual/cultural orientation, and moral-religional emphasis. 4) The quality of life of mothers with mentally handicapped children was predicted by attention problem($R^2$=.36, p=.000) and social competence($R^2$=.07, p=.038) in children and family cohesion ($R^2$=.16, p=.001). 5) Depression of mothers with mentally handicapped children was predicted by internalizing symptom ($R^2$=.21, p=.003) and thought disorder($R^2$=.06, p=.048) in children and family cohesion($R^2$=.14, p=.008). Conclusion：Reducing behavioral problems and family therapeutic intervention in autistic and mentally retarded children can improve the quality of life of primary caregivers and long-term prognosis of the children, although those are not curative.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.2
• /
• pp.93-101
• /
• 1999

A simple experimental method was used in an attempt to realize the elevation of the fishing ability of purse seine in the sea area of Cheju Island, the changes of seine volume and tension in the purseline during pursing. Experiments carried out on the six types simplified reduced model seines which were made of knotless nettings. The nettings were woven in different leg length 4.3, 5.0, 5.5, 6.0, 6.6 and 7.7mm of polyester 28 tex two threads two-ply twine, and each of the seines were named I, II, III, IV, V and Ⅵ seine. Dimension of seine models were 450cm for corkline and 85cmfor seine depth, each seines rigged up 160g of float for a floatline and 50g (underwater weight) of lead for a leadline. These model purse seines were made of the scale of 1/200 of its full scale, a 120 ton in the near sea of Cheju Island. Designing and testing for the model purse seines were based on the Tauti's law. Experiments were measured in the observation channel of a flume tank at the static conditions set up shooting and pursing equipments. Motion of purse seine during purse line was recorded by the two sets video camera for VTR which were placed in top and front of the model seine. The reading coordinate of seine volume carried out by the video digitization system, disk data for the purseline tension. An analysis were performed on the changes seine volume and tension in the purseline during pursing. The results obtained were as follows: 1. The seine volume during pursing was largest for Ⅵ seine with smallest d/l followed by V, IV, III, II and I seines, and tension in the purseline was small. 2. Seine volume during pursing can be expressed by the following equation; CVt=l-EXP[｛2.79 (d/l）＋0.35｝t-33.37 (d/l) ＋ 0.57] Where CVt is volume ratio, d is twine diameter, l is leg length and t is pursing time (sec). 3. Tension in the purse line during pursing can be expressed by the following equation; T= 1- EXP ｛0.57t ＋ 13.36 (d/l)+2.97｝ Where T is tension (kg) in the purseline during pursing.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.4 no.3_4
• /
• pp.79-91
• /
• 1971

A boat seine has been used as a major fishing gear for catching anchovy (Engraulis japonica) in the southern coastal waters of Korea since 1920s. The original seine was operated by two rowing boats as the haul seine. The rowing boats were, in recent, replaced by powered boats. The net size was enlarged by more than three times the original nit as they began to by operated in the deeper waters of approximately sixty meters. However, there are many problems in the efficiency of the fishing gear to be improved. The authors studied on the hydrodynamic resistance and performance of the boat seine net of the 1/10 scale model in tow. The results are summaried as follows. 1. The hydrodynamic resistance converted from model experiment into the full scale is: $$R_1=30,000\;v^{1.2}\;(0.2{\leqq}v{\leqq}1.0)$$ $$R_2=16,000\;v^2\;(0.2{\leqq}v{\leqq}0.6)$$ where $R_1$ and $R_2$ denote the resistance of whole gear and of bag net in kg respectively, and v the speed of flow in m/sec. 2. In the extension wing, approximately seventy percent of the length of the ground rope from the towing end to the inside-wing slopes down from sea level toward the sea bottom, while the thirty percent of the inside of it remains parallel with th: 5:a level. The performance is regarded to b: inefficient for driving fish shoal into the inside-wing, especially for the shoal diving suddenly. 3. At the towing speed higher than 0.2 m/sec, the trailing edge of the inside-wing is blown backward beyond the seaming line connecting the inside-wing and the mouth of the bag net. It is regarded as an unreasonable performance to drive the fish shoal smoothly into the bag net. 4. At the towing speed higher than 0.2 m/sec, the posterior end of the lower bosom is lifted up above the level of the ground rope of the inside-wing. It is considered that the fish shoal diving suddenly can escape through the discrepancy between the lower bosom and the sea bottom, even if the ground rope of the inside-wing sweeps the sea bottom. 5. The angle of inclination of the upper bosom is estimated as $35\~40^{\circ}$. It seems that the inclination is too steep to drive smoothly the fish shoal diving toward the sea bottom into the bag net. 6. In structure, circumference of the posterior section of the bag net is wider by 1.3 times that of the anterior section. Actually in towing at a speed higher than 0.2m/sec, however, the circumference of the posterior section becomes smaller than that of the anterior section. It is recommended to be designed in a long cylindrical form.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.29-46
• /
• 2004

It is important to identify geometries of fracture that act as a conduit of fluid flow for characterization of ground water flow in fractured rock. Fracture geometries control hydraulic conductivity and stream lines in a rock mass. However, we have difficulties to acquire whole geometric data of fractures in a field scale because of discontinuous distribution of outcrops and impossibility of continuous collecting of subsurface data. Therefore, it is needed to develop a method to describe whole feature of a target fracture geometry. This study suggests a new approach to develop a method to characterize on the whole feature of a target fracture geometry based on the Fourier transform. After sampling of specimens along a target fracture from borehole cores, effective frequencies among roughness components were selected by the Fourier transform on each specimen. Then, the selected effective frequencies were averaged on each frequency. Because the averaged spectrum includes all the frequency profiles of each specimen, it shows the representative components of the fracture roughness of the target fracture. The inverse Fourier transform is conducted to reconstruct an averaged whole roughness feature after low pass filtering. The reconstructed roughness feature also shows the representative roughness of the target subsurface fracture including the geometrical characteristics of each specimen. It also means that overall roughness feature by scaling up of a fracture. In order to identify the characteristics of permeability coefficients along the target fracture, fracture models were constructed based on the reconstructed roughness feature. The computation of permeability coefficient was performed by the homogenization analysis that can calculate accurate permeability coefficients with full consideration of fracture geometry. The results show a range between $10^{-4}{\;}and{\;}10^{-3}{\;}cm/sec$, indicating reasonable values of permeability coefficient along a large fracture. This approach will be effectively applied to the analysis of permeability characteristics along a large fracture as well as identification of the whole feature of a fracture in a field scale.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.3
• /
• pp.228-239
• /
• 1995

A model experiment on the pair midwater trawl net which is prevailing in Denmark is carried out to get the basic data available for Korean pair bottom trawlers. The model net was made in 1/30 scale considering the Tauti's Similarity law of fishing gear and the dimension of experimental tank. The vertical opening, horizontal opening, towing tension and net working depth of the model net were determined in the tank within the towing velocity 0.46~1.15m/sec, front weight 15.5~62.0g and distance between paired boats 5~8m(which correpond to 2~5k't in towing velocity, 70~280kg in weight and 150~240m in distance respectively in the prototype net). The results got from the model experiment can be converted into the full scale net as follows; 1. Vertical opening showed the largest value of 32m at the condition of 2k't in towing velocity, 280kg in front weight and 150m in the distance between paired boats, and the smallest value of 6m at the condition of 5k't in towing velocity, 70kg in front weight and 240m in the distance between paired boats. 2. Horizontal opening showed the largest value of 45m at the condition of 5k't in towing velocity, 70kg in front weight and 240m in the distance between paired boats, and the smallest value of 33m at the condition of 2k't in towing velocity, 280kg in front weight and 150m in the distance between paired boats. 3. Towing tension showed the largest value of 10, 000kg at the condition of 5k't in towing velocity, 280kg in front weight and 240m in the distance between paired boats, and the smallest value of 1, 600kg at the condition of 2k't in towing velocity, 70kg in front weight and 150m in the distance between paired boats. 4. Net working depth showed the largest value of 38m at the condition of 2k't in towing velocity, 280kg in front weight and 150m in the distance between paired boats, and the smallest value of 6m at the condition of 5k't in towing velocity, 70kg in front weight and 240m in the distance between paired boats. 5. Net opening area showed the largest value of 1, 100m super(2) at the condition of 2k't in towing velocity, 280kg in front weight and 180m in the distance between paired boats, and the smallest value of 250m super(2) at the condition of 5k't in towing velocity, 70kg in front weight and 240m in the distance between paired boats.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.2
• /
• pp.181-189
• /
• 2021

Purpose: The purpose of this study is to investigate the stress response and sleep state of the new patients who visit the hospital for prosthodontic treatment due to tooth loss to make reference to further treatment direction. Materials and methods: Examinations, consultations, and surveys were conducted on 236 patients (94 males, 142 females, and 24-86 years old), who newly registered at the department of prosthodontics at Pusan national university hospital, for 2 years from 2018. The number of remaining teeth, edentulous arch, possibility of mastication, and future prosthetic treatment directions were recorded. The visual analogue scale (VAS), stress response inventory (SRI) and Insomnia severity index (ISI) were used as tools to measure patient's subjective discomfort, stress response, and sleep status. Results: Among the entire prosthodontic patient group, the average value of 'fatigue' was significantly higher among the 7 items of SRI, and the value of 'aggression' was significantly lower (P<.001). There are a significant difference between the edentulous and full dentition in the oral discomfort value measured by VAS (P=.004). In cases where less than 20 teeth remain, mastication is impossible, and patients who are planning treatment with removable prostheses, VAS value and 'depression' and 'fatigue' values in SRI were higher than those in the reverse case (P<.05). The patients showed severe level in VAS value have high value of 'tension', 'somatization', 'depression', 'fatigue'and 'frustration'in SRI than non-serious patients (P<.05). Clinical insomnia occurred in 11.4% of all patients, and women had significantly lower sleep quality than men (P=.044). Patients with insomnia showed significantly higher scores on the VAS value and all 7 SRI items than those of normal sleepers (P<.05). Conclusion: The new prosthetics had high 'fatigue' value among the 7 items of SRI. The oral condition, number of residual teeth and mastication function and clinical insomnia affected oral discomfort and the stress response.