• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1994.03a
• /
• pp.118-128
• /
• 1994

The planar anisotropic FEM analysis for predicting the earing profiles and draw-in amounts in the deep-drawing processes is introduced. An implicit, incremental, updated Lagrangian formulation with a rigid-viscoplastic constitutive equation is employed. Contact and friction are considered through the mesh-based unit vectors and the normal contact pressure. the consistent full set of governing relations, comprising equilibrium and geometric constraint equations, is appropriately linearized. Barlat's strain-rate potential is employed, whose in-plane anisotropic properties are taken into account with anisotropic coefficients and potential parameter. The linear triangular membrane elements are used for depicting the formed sheet. with the numerical simulations of deep drawing processes of flat-top cylindrical cup for the 2090-T3 aluminum effects on the earing behavior are examined. Earing predictions made for the 2090-T3 aluminum alloy sheet show good agreement with experiments, although some discrepancies were observed in the directional trend of cup height and thickness strains.

• Journal of Welding and Joining
• /
• v.20 no.3
• /
• pp.98-104
• /
• 2002

A study on microstructures of welds for Zircaloy-4 sheath end closure by the resistance upset welding methods was carried out. Two upset welding process variations such as magnetic farce and multi-impulse resistance welding were used. Grain size and microhardness across welds were analysed in terms of welding parameters. Magnetic farce resistance weld with one cycle of unbalanced mode has smaller upset length and $\alpha-grain$ size in heat affected zone than those of multi-impulse resistance weld because of lower heat input and shorter welding time. Heat affected zone formed by two upset resistance welding variations revealed fine Widmanstatten structure or martensitic ${\alpha}'$ structure due to the high heating rate and foster cooling rate. Magnetic force resistance welds showed recrystallized grains before grain growth, whereas multi-impulse resistance welds showed full grain growth.

• The Korean Journal of Pharmacology
• /
• v.5 no.1
• /
• pp.57-64
• /
• 1969

Acetylsalicylic acid, administered intravenously in a dose of 120 mg+250 mg/h, markedly decreased the urinary excretion of sodium and chloride, and slightly depressed potassium excretion, so that the ratio of urinary concentrations of potassium to sodium increased after ASA. Osmolar and free water clearances also diminished during water diuresis, and free water reabsorption $(T^cH_2O)$ decreased after ASA during mannitol diuresis. Glomerular filtration rate and urine flow rate changed little. When infused directly into a renal artery, ASA exhibited identical action on both kidneys, indicating that the renotropic action is mediated by some endogenous humoral agents or by some metabolites of ASA. A dose of 100 mg i.v. of spironolactone, a aldosterone antagonist, slightly reversed the renal reflect when given during maximum action of ASA. Ethacrynic acid could display its full diuretic action unhindered during maximum ASA action. Above observations lead to the suggestion that acetylsalicylic acid might release aldosterone and the action on electrolyte excretion may be mediated by the mineralocorticoid.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.7 no.1
• /
• pp.16-18
• /
• 1977

The purposes of this investigation was to determine the appearance rate of nutrient canals and the aspect of alveolar bone trabecular patterns. 1949 subjects, averages 23 years old, who have normal occlusion were used. The film used in this investigation was full mouth roentgenographic survey. The obtained results were as follows: 1. In the trabecular pattern, coarse form was 35.17% and fine one was 64.14% in both jaws. 2. The appearance rate of nutrient canals was much higher in mandibular anterior segment(89.13%) than in the maxillary posterior segment(0.86%). 3. In the trabecular forms, small trabecular space and horizontal relation appeared in the mandible, and vertical relation in the maxilla.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.6
• /
• pp.241-245
• /
• 2003

ZnO thin films on (l00) p-type Si and sapphire substrates have been deposited by a pulsed laser deposition technique using an Nd:YAG laser with a wavelength of 266 nm. The influence of the deposition parameters such as oxygen pressure, substrate temperature and laser energy density on the properties of the grown films was studied. The experiments were performed for substrate temperatures in the range of 200∼50$0^{\circ}C$ and oxygen pressure in the range of 100∼700 sccm. All of the films grown in this experiment show strong c-axis orientation with (002) textured ZnO peak. With increasing substrate temperature, the FWHM (full width at half maximum) and surface roughness were decreased. In the case of using sapphire substrate, the intensity of PL spectra increased with increasing ambient oxygen flow rate. We investigated the structural and morphological properties of ZnO thin films using X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM).

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.192-199
• /
• 2003

Film growth of InP and GaAs using TMIn, TMGa, TBAs and TBP is numerically predicted and compared to the experimental results. To obtain exact thermal boundary conditions at the reactor walls, the gas flow and heat transfer are analyzed for full three-dimensional reactor including outer tube as well as the inner reactor parts. The results indicate that the exact thermal boundary conditions are important to get precise film growth rate prediction since film deposition is mainly controlled by the temperature dependent diffusion. The results also show that thermal diffusion plays an important role in the upstream region.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.321-329
• /
• 2013

A multilevel inverter employing a cascade transformer is proposed for a silent-discharge-tube ozone generating system. The proposed inverter consists of four full-bridge inverters and fourteen transformers which have a series-connected secondary. It can accurately control the amplitude of the output voltage; hereby, it improves a linear characteristic of the rate of ozone yielding. The power regulation characteristics and operational principle of the proposed system are explained from a practical point of view. High precision ozone generating performance of the proposed multilevel inverter is verified by computer-aided simulations and experiment results.

• Membrane and Water Treatment
• /
• v.5 no.3
• /
• pp.221-233
• /
• 2014

Simulations were conducted to predict supersaturation along Reverse Osmosis (RO) modules for seawater desalination. The modeling approach is based on the use of conservation principles and chemical equilibria equations along RO modules. Full Pitzer ion interactive forces model for concentrated solutions was implement to calculate activity coefficients. An average rejection rate for all ionic species was considered. Supersaturation has been used to assess scaling. Supersaturations with respect to all calcium carbonate forms and calcium sulfate were calculated up to 50% recovery rate in seawater RO desalination. The results for four different seawater qualities are shown. The predictions were in a good agreement with the experimental results.

• Journal of Korean Institute of Industrial Engineers
• /
• v.14 no.2
• /
• pp.63-70
• /
• 1988

Recently a new regime, called "back school" is advocated for the purpose of rapidly and economically returning a patient to full functional fitness and normal occupational activities. Assuming that this functional and vocational restoration is a goal of a regabilitation program, it is apparent that early recovery and higher success rate are major concern. In this study, a mixture model is developed and used to evaluate the recovery process of low back pain (LBP) patients in a rehabilitation program. The model provides (1) the probability of being recovered, and (2) the rate of recovery. Patients with gradual onset, with higher education, or of young age tend to show better prognosis.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06a
• /
• pp.140-147
• /
• 1998

The texture evolution by deep drawing was investigated and the lattice rotation rate was predicted using rate sensitive model with full constraints boundary conditions. The calculated textures show different behaviors with the amount of the flange deformation and initial crystal orientations. Among the crystal orientations located parallel to RD, the crystal orientations around the D component rotated toward the Cu component, the crystal orientations along the ${\alpha}$ fiber rotated toward the {110}<001> and {110}<111> components during deep drawing. In the case of the part parallel to 45$^{\circ}$ with respect to RD, the crystal orientations around the D component rotated about ND and the crystal orientations along the ${\alpha}$ fiber also rotated toward the (110)[23] and (110)[27] components about ND. In the part parallel to TD, the crystal orientations around the D component rotated toward the Rotated Cube and the crystal orientations along the ${\alpha}$ fiber rotated toward the {110}<113> component.