• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.1
• /
• pp.1-13
• /
• 2010

A comparative study between a computation and an experiment has been conducted to predict the performance of a Pod type waterjet for cm amphibious wheeled vehicle. The Pod type waterjet has been chosen on the basis of the required specific speed of more than 2500. As the Pod type waterjet is an extreme type of axial flow type waterjet, theoretical as well as experimental works about Pod type waterjets are very rare. The main purpose of the present study is to validate and compare to the experimental results of the Pod type waterjet with the developed CFD in-house code based on the RANS equations. The developed code has been validated by comparing with the experimental results of the well-known turbine problem. The validation also extended to the flush type waterjet where the pressures along the duct surface and also velocities at nozzle area have been compared with experimental results. The Pod type waterjet has been designed and the performance of the designed waterjet system including duct, impeller and stator was analyzed by the previously mentioned m-house CFD Code. The pressure distributions and limiting streamlines on the blade surfaces were computed to confirm the performance of the designed waterjets. In addition, the torque and momentum were computed to find the entire efficiency and these were compared with the model test results. Measurements were taken of the flow rate at the nozzle exit, static pressure at the various sections along the duct and also the nozzle, revolution of the impeller, torque, thrust and towing forces at various advance speed's for the prediction of performance as well as for comparison with the computations. Based on these measurements, the performance was analyzed according to the ITTC96 standard analysis method. The full-scale effective and the delivered power of the wheeled vehicle were estimated for the prediction of the service speed. This paper emphasizes the confirmation of the ITTC96 analysis method and the developed analysis code for the design and analysis of the Pod type waterjet system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.6
• /
• pp.525-538
• /
• 2014

Safety of reactive systems is one of the most important research areas in the field of weapon development. A NoGo response or at least a low-order explosion should be ensured to prevent unexpected accidents when the reactive system is impacted by high-velocity projectile. We investigated the shock-induced detonation of cased reactive systems subject to a normal projectile impact to the cylindrical surface based on two-dimensional hydrodynamic simulations using the I&G chemical rate law. Two types of energetic materials, namely LX-17 and AP-based solid propellant, were considered to compare the dynamic responses of the reactive system when subjected to the threshold impact velocity. It was found that shock-to-detonation transition phenomena occurred in the cased LX-17, whereas no full reaction occurred in the propellant.

• Tunnel and Underground Space
• /
• v.22 no.2
• /
• pp.144-156
• /
• 2012

This paper discusses the methods of estimating the punch penetration indices and data analysis punch penetration test to estimate the TBM normal force and penetration rate. In punch penetration test is known as a useful test to estimate penetration rates and normal force of TBMs directly with several slope indices indicated drill-ability and brittleness of rocks. However, the standard methods and indices for punch penetration test are not suggested yet. The main purpose of punch penetration test which is prediction of normal force of TBM disc cutter when cutters excavate rock mass. In this study, the punch penetration tests were performed for 6 representative Korean rock types and variety length and diameter of rock core specimens. Among slope indices were obtained from punch penetration test, PLI and MLI which is suggested in this study show high correlation with cutter force measured by full-scale cutting test. The results show that the predicted normal force of a single disc cutter and the experimental error was 10%. Based on these results, it is concluded that punch penetration test is reliable laboratory test for estimating thrust and penetration rates of TBM.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.5
• /
• pp.670-677
• /
• 2011

The growth rate of the young pig is generally much less than it's potential and may be constrained by endocrine status as well as nutrient intake. Growth factors are present in relatively high quantities in colostrum and play an important part in gut development. It is possible that supplementation of colostrum protein isolate may stimulate gut and whole body growth in the pig. Eight male and 8 female (Large Whitex${\times}$Landrace) piglets were weaned at 1 d of age after each pig had obtained colostrum from their dam, and were trained to consume one of two liquid diets. The two diets were based on either a colostrum protein isolate (n = 4 males and 4 females) or whey protein concentrate (n = 4 males and 4 females) and were formulated to contain equal levels of crude protein and amino acids. Pigs were fed their diets ad libitum for 28 days after which time 12 pigs were euthanised and various tissues and organs weighed. Pigs were bled for IGF-I analyses at 21 and 28 days of age. Daily gain was higher in pigs consuming the colostrum isolate (171 vs. 216 g/d, p = 0.010), particularly between 2 and 4 weeks of age (212 vs. 298 g/d, p = 0.010). Pigs tended to consume more of the liquid feed containing colostrum isolate (25.5 vs. 29.1 kg, p = 0.074) and gained more live weight per unit of liquid feed (0.203 vs. 0.223 g/g, p = 0.056). There were no effects of sex on growth performance. Pigs consuming the diet supplemented with colostrum isolate had higher (p<0.05) full gut weight (445 vs. 554 g, p = 0.026), empty gut weight (356 vs. 463 g, p = 0.008), stomach weight (42.2 vs. 54.4 g, p = 0.001), small intestine weight (222 vs. 275 g, p = 0.025) and large intestine weight (63.7 vs. 98.0 g, p = 0.005). Plasma IGF-I (99 vs. 150 ng/ml, p<0.001) and IGF-II (265 vs. 406 ng/ml, p<0.001) were higher in pigs fed colostrum isolate. Pigs consuming colostrum protein isolate ate more, grew faster and had higher plasma IGF-I concentrations than pigs consuming a diet with similar macronutrient content but devoid of growth factors.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.11
• /
• pp.1547-1551
• /
• 2011

Bakery waste (BW) is much cheaper than barley (20 to 40% the price of barley). Bakery waste and barley grain have similar chemical composition; they contain 99 and 97% organic matter (OM), 1.1 and 1.8% fat, 18 and 15% neutral detergent fibre (NDF) and 14.0 and 14.5% crude protein (CP), respectively (DM basis). The objectives of this study were to determine the effect of substituting BW for barley grain in high concentrate fattening diets for lambs on nutrient intake, growth and carcass characteristics. Forty Awassi lambs (21.75${\pm}$1 kg) weaned at the age of 65 days were assigned randomly to four experimental fattening diets differing in BW ratio in a completely randomized design. The control diet (CON) contained 20, 60, 11, 7, and 2% (DM basis) wheat straw, barley grain, soybean meal, corn grain, and minerals and vitamin mix, respectively. Bakery waste substituted barley grain by 10, 20 and 30% of the diet DM in the LBW, MBW and HBW diets, respectively. The experiment lasted for 56 days. Dry matter intake (DMI) decreased (p<0.05) in LBW diet compared to the CON diet by approximately 10%. No further reduction in DMI was observed with the higher substitution levels. Metabolizable energy intake for the CON diet (3.6 Mcal/d) was also reduced (p<0.05) compared with LBW, MBW and HBW diets (3.4, 3.4 and 3.3 Mcal/d, respectively). Final body weight for lambs fed the CON diet (34.8 kg) was higher (p<0.05) compared with lambs fed the LBW, MBW and HBW diets (30.6, 32.0 and 31.1 kg, respectively). Growth rate for lambs fed the CON diet (232 g/d) was also higher (p<0.05) compared to lambs fed the LBW, MBW and HBW diets (170, 189, and 167 g/d, respectively). Feed to gain ratio was higher (p<0.05) for lambs fed the LBW, MBW and HBW diets (7.2, 6.6 and 7.3, respectively) compared with lambs that consumed the CON diet (5.7). Body weight gain cost was reduced by approximately 8% by the MBW and HBW diets as compared with the CON diet. Dressing percentage, full gut weight, empty gut weight and liver weights were all unaffected by the BW addition to the diets and averaged 48.9%, 6.8 kg, 2.8 kg and 0.444 kg, respectively. However, fat tail weight was increased (p<0.05) with the higher levels of the BW inclusion. In conclusion, substituting BW for barley grain reduced DMI and growth performance. However, when BW substituted barley grain at the 20 and 30% of the diet DM, body weight gain cost was reduced by approximately 8%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.6
• /
• pp.784-790
• /
• 2018

Objective: The genetic effects of an individual on the phenotypes of its social partners, such as its pen mates, are known as social genetic effects. This study aims to identify the candidate genes for social (pen-mates') average daily gain (ADG) in pigs by using the genome-wide association approach. Methods: Social ADG (sADG) was the average ADG of unrelated pen-mates (strangers). We used the phenotype data (16,802 records) after correcting for batch (week), sex, pen, number of strangers (1 to 7 pigs) in the pen, full-sib rate (0% to 80%) within pen, and age at the end of the test. A total of 1,041 pigs from Landrace breeds were genotyped using the Illumina PorcineSNP60 v2 BeadChip panel, which comprised 61,565 single nucleotide polymorphism (SNP) markers. After quality control, 909 individuals and 39,837 markers remained for sADG in genome-wide association study. Results: We detected five new SNPs, all on chromosome 6, which have not been associated with social ADG or other growth traits to date. One SNP was inside the prostaglandin $F2{\alpha}$ receptor (PTGFR) gene, another SNP was located 22 kb upstream of gene interferon-induced protein 44 (IFI44), and the last three SNPs were between 161 kb and 191 kb upstream of the EGF latrophilin and seven transmembrane domain-containing protein 1 (ELTD1) gene. PTGFR, IFI44, and ELTD1 were never associated with social interaction and social genetic effects in any of the previous studies. Conclusion: The identification of several genomic regions, and candidate genes associated with social genetic effects reported here, could contribute to a better understanding of the genetic basis of interaction traits for ADG. In conclusion, we suggest that the PTGFR, IFI44, and ELTD1 may be used as a molecular marker for sADG, although their functional effect was not defined yet. Thus, it will be of interest to execute association studies in those genes.

• Journal of Korean Academy of Nursing
• /
• v.30 no.6
• /
• pp.1543-1555
• /
• 2000

Home health care is moving into a set of new realities. An era of competition and cost containment has arrived. Before nurses are able to contain costs or describe the relationship between nursing activities, cost must be accurately measured based on the nurse's workload. Nurses in home health care usually desire to measure expenses for one of three reasons : reimbursement, management, or research. The purpose of the study was to investigate the work input by Registered Nurse in each of the home health care activities by relative value units and identify the factors affecting the nurses' total work input in health care services. To measure the work input by nurses, work was defined by four dimensions: time, physical effort, mental effort, and stress. This study used a descriptive-correlational design. Data collection consisted of two phases. In phase I, data on home health activities performed by nurses were collected. In phase II, data on nurses' time, physical effort, mental effort, and stress in each of home health care activities discovered phase I were collected. In this method, the respondent was asked to rate a service in relation to a reference service using a ratio scale. The sample included 39 home health care nurses. The results of the study indicated that home health care activities performed by the nurses were in 10 categories and 69 items. Measuring the relative work inputs in each of home health care activities, and foley catheterization was selected as the reference to service. In terms of time and physical effort dimensions, full bath service was rated as the most strenuous among 69 activities by the respondents, and intramuscular injection was rated as least. It was found that emergency treatment required the highest mental effort and the highest stress, while blood sugar tests required the lowest mental effort. Approximately 91.3% of the variance in total work input was accounted for by the linear combination of time, physical effort, mental effort judgement, and stress. Examining the regression coefficients of those variables, physical effort, time, and stress were found as the predictors which were significantly associated with the total work of nurses in home health care. Professional nursing's next step in the conundrum of economic volatility is to develop a tool to reflect the interaction of functional deficiency and direct professional nursing care. And this will be a more accurate predictor of nursing resource use and ultimately a great forcaeter cost.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.2
• /
• pp.187-195
• /
• 2015

The gas explosions in offshore installations are known to be very severe according to its geometry and environmental conditions such as leak locations and wind directions, and a dynamic response of structures due to blast loads depends on the load profile. Therefore, a parametric study has to be conducted to investigate the effects of the dynamic response of structural members subjected to various types of load shapes. To do so, a series of CFD analyses was performed using a full-scale FPSO topside model including detail parts of pipes and equipments, and the time history data of the blast loads at monitor points and panels were obtained by the analyses. In this paper, we focus on a structural dynamic response subjected to blast loads changing the magnitude of positive/negative phase pressure and time duration. From the results of linear/nonlinear transient analyses using single degree of freedom(SDOF) and multi-degree-of freedom(MDOF) systems, it was observed that dynamic responses of structures were significantly influenced by the magnitude of positive and negative phase pressures and negative time duration.

• Journal of Agricultural Extension & Community Development
• /
• v.12 no.2
• /
• pp.137-150
• /
• 2005

Although the rate of women farmer's participation in agricultural activities have been increased upto 52.7 % as of year 2003, Korean society has not fully recognized their roles in rural society. According to the agricultural basic law, most of rural women were engaged in agriculture as full time job, however, only about 11% of them could have supporting evidence of themselves as farmer having legal right. If women farmers faced some unexpected things such as a traffic accident, insurance company would not reward them as farmers unless they provide written proof of their job as farm worker or farm owner. Based on lawyer's legal advice, the authors developed a diary called "Saenghwalilji", a daily diary based on their time use and bookkeeping to prove the fact of their contribution to income generation of the farm. After examination of the diary, 18 persons out of 29 volunteers kept two types of dairy for the period of two weeks, and they reported it was very useful. Finally the better one of two was selected after reflecting the suggestions from the respondents. The "Saenghwalilji", will be very useful proof of women farmer's contribution to income, at the same time improving their farm management through better use of daily life time.

• Journal of Arbitration Studies
• /
• v.16 no.1
• /
• pp.253-275
• /
• 2006

Ever since the open and reform policy in 1987, China has adopted the socialistic market economy system and has been moving forward in economic reform. This gradually expanded their market economy. The open and reform policy achieved the highest average annual GDP growth rate of 9% and helped the country maintain high growth. China's economic growth in recent years has a lot to do with the international trading and direct investment by foreign corporations. China's entry into the WTO dramatically increased their amount of capital and investments due to their aggressive investments with foreign corporations. It is quite amazing that investments in China has been constantly increasing while the direct investments worldwide is decreasing. Moreover, increase in such investments is contributing to China's job creation, as well as, the expansion of international trading. When international economic exchange started between Japan and China in the 1970s, it was in the form of aid for developing countries, hence the collection of the investment was out of the question. It was in the 1990s that Japan started the full-scale investments with China and it was mostly centered in transfer of the production base. Japanese corporations aim was to mass produce goods less expensively using abundant and cheap labor and to sell them to Japan and other countries. The amount of Japan's exports and imports compared with China is increasing every year but the trade deficit has gone into the red. The dollar amount has been decreased from $ 27 billion in 2001 to $ 18 billion in 2003. The problems and damages in the system of justice and administrative confrontation that Japanese corporations are facing are continuously at a stand-still even after China's entry into the WTO. It has been 20 years since Japan's advance in China and during that period, the Japanese corporations brought many changes ranging from exports/imports to direct investment. Although Japan's new corporations tend to be located in the mid-western part of China, rather than the coastal areas, the region itself is not the cause for the confrontation. The problem stems from the Japanese treating the Chinese as if they were Japanese because they look similar due to their Asian ancestry. In reality the Chinese have completely different ways of doing business. Here we will take a look at the international trading and direct investment of Japanese corporations in China and study the conflicts that occurred in business transactions with China through real examples.