• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권1호
• /
• pp.1-13
• /
• 2010

A comparative study between a computation and an experiment has been conducted to predict the performance of a Pod type waterjet for cm amphibious wheeled vehicle. The Pod type waterjet has been chosen on the basis of the required specific speed of more than 2500. As the Pod type waterjet is an extreme type of axial flow type waterjet, theoretical as well as experimental works about Pod type waterjets are very rare. The main purpose of the present study is to validate and compare to the experimental results of the Pod type waterjet with the developed CFD in-house code based on the RANS equations. The developed code has been validated by comparing with the experimental results of the well-known turbine problem. The validation also extended to the flush type waterjet where the pressures along the duct surface and also velocities at nozzle area have been compared with experimental results. The Pod type waterjet has been designed and the performance of the designed waterjet system including duct, impeller and stator was analyzed by the previously mentioned m-house CFD Code. The pressure distributions and limiting streamlines on the blade surfaces were computed to confirm the performance of the designed waterjets. In addition, the torque and momentum were computed to find the entire efficiency and these were compared with the model test results. Measurements were taken of the flow rate at the nozzle exit, static pressure at the various sections along the duct and also the nozzle, revolution of the impeller, torque, thrust and towing forces at various advance speed's for the prediction of performance as well as for comparison with the computations. Based on these measurements, the performance was analyzed according to the ITTC96 standard analysis method. The full-scale effective and the delivered power of the wheeled vehicle were estimated for the prediction of the service speed. This paper emphasizes the confirmation of the ITTC96 analysis method and the developed analysis code for the design and analysis of the Pod type waterjet system.

• 대한기계학회논문집B
• /
• 제38권6호
• /
• pp.525-538
• /
• 2014

무기체계 개발에서 예상치 못한 고속의 총탄 충격을 받았을 때 반응 시스템의 폭발 반응을 예측하는 것은 안정성 확보를 위하여 매우 중요하다. 본 연구에서는 LX-17(92.5% TATB, 7.5% Kel-F)과 AP 기반의 고체 추진제(88% AP, 12% HTPB)가 충전된 반응 시스템에 한계 속도로 충돌하는 총탄 충격을 가했을 경우 발생하는 폭굉 현상 및 파괴 거동을 I&G 모델이 적용된 2차원 하이드로 수치해석을 통해 규명하고자 하였다. 해석 결과, LX-17의 경우 충격-폭굉 천이 현상(SDT)이 주요한 메커니즘으로 작용한 반면 고체 추진제는 상대적으로 안정한 모습을 보였다. 즉, 시스템의 파괴는 내부 압력의 급격한 증가와 격렬한 화학반응을 동반하는 고에너지 물질의 폭굉 현상이 그 원인이며, 폭발등급이 낮은 경우에는 고속 충돌에도 발화되지 않아 커버가 완전 파쇄에 이르지 않는 것으로 관찰되었다.

• 터널과지하공간
• /
• 제22권2호
• /
• pp.144-156
• /
• 2012

본 논문에서는 TBM의 굴진성능 평가를 위한 실내시험 중 하나인 압입시험의 시험과 결과 분석방법에 대하여 연구하였다. 압입시험은 암석의 굴진저항 및 취성도를 나타내는 여러 지수들을 산정하고 이를 통해 TBM의 굴진율 및 추력을 직접적으로 추정할 수 있는 유용한 실험으로 알려져 있으나 국내에서는 아직 관련된 연구가 수행된 바 없으며 규격화된 시험방법이나 결과해석방법 역시 제시되지 못하고 있는 실정이다. 본 연구에서는 압입시험의 시험 장비를 재구성하여 제작하였고 다양한 조건에 대하여 시험을 수행하여 합리적인 시험방법과 시편의 크기에 대하여 고찰하였다. 또한 국내의 6개 암종에 대하여 압입시험을 수행하고 하중지수의 산정방법에 대하여 연구하였으며 하중지수로써 PLI와 MLI를 제안하였다. 본 연구에서 제안된 지수인 PLI와 MLI는 동일한 암종을 대상으로 수행된 선형절삭시험결과와 밀접한 상관관계를 보였으며 하중지수를 통해 개략적으로 예측된 단일 디스크커터의 수직하중은 실험값과 10% 오차를 보였다. 압입시험은 TBM의 성능예측을 위한 유용한 실험법임을 확인할 수 있었으며 본 연구는 이를 위한 기초연구로서 그 활용도가 높을 것으로 기대된다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권5호
• /
• pp.670-677
• /
• 2011

The growth rate of the young pig is generally much less than it's potential and may be constrained by endocrine status as well as nutrient intake. Growth factors are present in relatively high quantities in colostrum and play an important part in gut development. It is possible that supplementation of colostrum protein isolate may stimulate gut and whole body growth in the pig. Eight male and 8 female (Large Whitex${\times}$Landrace) piglets were weaned at 1 d of age after each pig had obtained colostrum from their dam, and were trained to consume one of two liquid diets. The two diets were based on either a colostrum protein isolate (n = 4 males and 4 females) or whey protein concentrate (n = 4 males and 4 females) and were formulated to contain equal levels of crude protein and amino acids. Pigs were fed their diets ad libitum for 28 days after which time 12 pigs were euthanised and various tissues and organs weighed. Pigs were bled for IGF-I analyses at 21 and 28 days of age. Daily gain was higher in pigs consuming the colostrum isolate (171 vs. 216 g/d, p = 0.010), particularly between 2 and 4 weeks of age (212 vs. 298 g/d, p = 0.010). Pigs tended to consume more of the liquid feed containing colostrum isolate (25.5 vs. 29.1 kg, p = 0.074) and gained more live weight per unit of liquid feed (0.203 vs. 0.223 g/g, p = 0.056). There were no effects of sex on growth performance. Pigs consuming the diet supplemented with colostrum isolate had higher (p<0.05) full gut weight (445 vs. 554 g, p = 0.026), empty gut weight (356 vs. 463 g, p = 0.008), stomach weight (42.2 vs. 54.4 g, p = 0.001), small intestine weight (222 vs. 275 g, p = 0.025) and large intestine weight (63.7 vs. 98.0 g, p = 0.005). Plasma IGF-I (99 vs. 150 ng/ml, p<0.001) and IGF-II (265 vs. 406 ng/ml, p<0.001) were higher in pigs fed colostrum isolate. Pigs consuming colostrum protein isolate ate more, grew faster and had higher plasma IGF-I concentrations than pigs consuming a diet with similar macronutrient content but devoid of growth factors.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권11호
• /
• pp.1547-1551
• /
• 2011

Bakery waste (BW) is much cheaper than barley (20 to 40% the price of barley). Bakery waste and barley grain have similar chemical composition; they contain 99 and 97% organic matter (OM), 1.1 and 1.8% fat, 18 and 15% neutral detergent fibre (NDF) and 14.0 and 14.5% crude protein (CP), respectively (DM basis). The objectives of this study were to determine the effect of substituting BW for barley grain in high concentrate fattening diets for lambs on nutrient intake, growth and carcass characteristics. Forty Awassi lambs (21.75${\pm}$1 kg) weaned at the age of 65 days were assigned randomly to four experimental fattening diets differing in BW ratio in a completely randomized design. The control diet (CON) contained 20, 60, 11, 7, and 2% (DM basis) wheat straw, barley grain, soybean meal, corn grain, and minerals and vitamin mix, respectively. Bakery waste substituted barley grain by 10, 20 and 30% of the diet DM in the LBW, MBW and HBW diets, respectively. The experiment lasted for 56 days. Dry matter intake (DMI) decreased (p<0.05) in LBW diet compared to the CON diet by approximately 10%. No further reduction in DMI was observed with the higher substitution levels. Metabolizable energy intake for the CON diet (3.6 Mcal/d) was also reduced (p<0.05) compared with LBW, MBW and HBW diets (3.4, 3.4 and 3.3 Mcal/d, respectively). Final body weight for lambs fed the CON diet (34.8 kg) was higher (p<0.05) compared with lambs fed the LBW, MBW and HBW diets (30.6, 32.0 and 31.1 kg, respectively). Growth rate for lambs fed the CON diet (232 g/d) was also higher (p<0.05) compared to lambs fed the LBW, MBW and HBW diets (170, 189, and 167 g/d, respectively). Feed to gain ratio was higher (p<0.05) for lambs fed the LBW, MBW and HBW diets (7.2, 6.6 and 7.3, respectively) compared with lambs that consumed the CON diet (5.7). Body weight gain cost was reduced by approximately 8% by the MBW and HBW diets as compared with the CON diet. Dressing percentage, full gut weight, empty gut weight and liver weights were all unaffected by the BW addition to the diets and averaged 48.9%, 6.8 kg, 2.8 kg and 0.444 kg, respectively. However, fat tail weight was increased (p<0.05) with the higher levels of the BW inclusion. In conclusion, substituting BW for barley grain reduced DMI and growth performance. However, when BW substituted barley grain at the 20 and 30% of the diet DM, body weight gain cost was reduced by approximately 8%.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권6호
• /
• pp.784-790
• /
• 2018

Objective: The genetic effects of an individual on the phenotypes of its social partners, such as its pen mates, are known as social genetic effects. This study aims to identify the candidate genes for social (pen-mates') average daily gain (ADG) in pigs by using the genome-wide association approach. Methods: Social ADG (sADG) was the average ADG of unrelated pen-mates (strangers). We used the phenotype data (16,802 records) after correcting for batch (week), sex, pen, number of strangers (1 to 7 pigs) in the pen, full-sib rate (0% to 80%) within pen, and age at the end of the test. A total of 1,041 pigs from Landrace breeds were genotyped using the Illumina PorcineSNP60 v2 BeadChip panel, which comprised 61,565 single nucleotide polymorphism (SNP) markers. After quality control, 909 individuals and 39,837 markers remained for sADG in genome-wide association study. Results: We detected five new SNPs, all on chromosome 6, which have not been associated with social ADG or other growth traits to date. One SNP was inside the prostaglandin $F2{\alpha}$ receptor (PTGFR) gene, another SNP was located 22 kb upstream of gene interferon-induced protein 44 (IFI44), and the last three SNPs were between 161 kb and 191 kb upstream of the EGF latrophilin and seven transmembrane domain-containing protein 1 (ELTD1) gene. PTGFR, IFI44, and ELTD1 were never associated with social interaction and social genetic effects in any of the previous studies. Conclusion: The identification of several genomic regions, and candidate genes associated with social genetic effects reported here, could contribute to a better understanding of the genetic basis of interaction traits for ADG. In conclusion, we suggest that the PTGFR, IFI44, and ELTD1 may be used as a molecular marker for sADG, although their functional effect was not defined yet. Thus, it will be of interest to execute association studies in those genes.

• 대한간호학회지
• /
• 제30권6호
• /
• pp.1543-1555
• /
• 2000

Home health care is moving into a set of new realities. An era of competition and cost containment has arrived. Before nurses are able to contain costs or describe the relationship between nursing activities, cost must be accurately measured based on the nurse's workload. Nurses in home health care usually desire to measure expenses for one of three reasons : reimbursement, management, or research. The purpose of the study was to investigate the work input by Registered Nurse in each of the home health care activities by relative value units and identify the factors affecting the nurses' total work input in health care services. To measure the work input by nurses, work was defined by four dimensions: time, physical effort, mental effort, and stress. This study used a descriptive-correlational design. Data collection consisted of two phases. In phase I, data on home health activities performed by nurses were collected. In phase II, data on nurses' time, physical effort, mental effort, and stress in each of home health care activities discovered phase I were collected. In this method, the respondent was asked to rate a service in relation to a reference service using a ratio scale. The sample included 39 home health care nurses. The results of the study indicated that home health care activities performed by the nurses were in 10 categories and 69 items. Measuring the relative work inputs in each of home health care activities, and foley catheterization was selected as the reference to service. In terms of time and physical effort dimensions, full bath service was rated as the most strenuous among 69 activities by the respondents, and intramuscular injection was rated as least. It was found that emergency treatment required the highest mental effort and the highest stress, while blood sugar tests required the lowest mental effort. Approximately 91.3% of the variance in total work input was accounted for by the linear combination of time, physical effort, mental effort judgement, and stress. Examining the regression coefficients of those variables, physical effort, time, and stress were found as the predictors which were significantly associated with the total work of nurses in home health care. Professional nursing's next step in the conundrum of economic volatility is to develop a tool to reflect the interaction of functional deficiency and direct professional nursing care. And this will be a more accurate predictor of nursing resource use and ultimately a great forcaeter cost.

• 한국전산구조공학회논문집
• /
• 제28권2호
• /
• pp.187-195
• /
• 2015

가스 생산용 해양플랜트 설비에서 발생할 수 있는 폭발사고의 경우, 구조 시스템의 기하학적 특성이나, 바람, 가스 누출율 등과 같은 환경적 조건에 의해 피해 규모의 범위가 상당하다. 따라서 폭발파에 의한 구조 부재의 응답을 분석하기 위해서는 이러한 조건들을 고려한 가스폭발 수치해석 과정이 반드시 필요하다. 본 연구에서는 FPSO 탑사이드의 형상 및 장비 배치와 같은 세부적인 부분까지 고려하여 폭발해석을 수행하였으며, 이를 바탕으로 획득한 하중 이력들의 특성을 분석하였다. 또한 다양한 형태로 나타나는 폭발하중 이력들 중 구조물 손상에 직접적으로 영향을 미칠 수 있는 최대 압력과 지속시간들을 고려하여 유한요소해석 시 하중조건으로 적용한 후, 부재의 응답특성에 관한 분석을 수행하였다. 유한요소해석 모델은 실제 구조물에 적용이 가능하고, 복잡한 형상을 이상화한 단 자유도 및 다 자유도 모델을 사용하였다. 정 압력 및 부 압력단계의 최대 압력이 증가함에 따라 구조 부재의 최대 응답이 증가하였고, 부 압단계에서 하중 지속시간이 증가함에 따라 구조물의 최대 변위가 증가는 경향을 보였다.

• 농촌지도와개발
• /
• 제12권2호
• /
• pp.137-150
• /
• 2005

여성농업인이 결코 남성보다 적지 않게 농업에 종사하고 있으며, 농가소득에 기여를 함에도 노동에 대한 가치가 인정되지 않고 있다. 농업주종사 여성의 82% 이상이 농업농촌기본법상의 '연간 90일 이상 농업에 종사'하여 실제 농업인이지만, 이를 증명하기 곤란한 상태이다. 이러한 농업인 증명의 어려움으로 정부 정책 및 제도, 상재해 보험 보상시 여성농업인 노동에 대한 가치가 반영되지 못하고 있다. 본 연구에서는 개인의 기록이 법정에서 증거자료로 인정된 사례와 법률관계자 자문에 따라 실제 농업에 종사하나 증명이 곤란한 여성 등 가족종사자의 농업인 증명이 가능한 생활일지를 개발하였다. 생활일지 사용자의 편리성을 향상을 위한 현장적용 시험 결과에서 생활일지 기록 습관은 회계관리, 경영활동 및 효율적인 시간관리 등 여성의 전문농업경영 능력을 향상 시킬 수 있을 것으로 나타났다. 실제 농업종사자를 직업인 인정이 가능한 법으로 정비되고 제도적 지원이 더 궁극적인 목표이지만, 현실적으로 농업인 범위에서 제외되는 농업종사자를 위한 지위인정 방안이 시급히 마련되어야 한다는 측면에서 생활일지 개발의 의미가 있는 것이다. 이러한 생활일지의 목적이 실생활에서 반영되어 여성농업인의 노동을 증명하는 자료로써 활용해야 할 것이며, 적극적으로 판례를 만들어가는 노력이 필요할 것이다. 더불어 이러한 생활일지 기록활동은 경제활동 주체로서의 자기인식과 농업경영과 관련된 지식 및 자료의 축적에 도움을 제공함으로써, 여성 농업인의 농업경영능력 향상에 기여를 할 것으로 기대된다.

• 한국중재학회지:중재연구
• /
• 제16권1호
• /
• pp.253-275
• /
• 2006

Ever since the open and reform policy in 1987, China has adopted the socialistic market economy system and has been moving forward in economic reform. This gradually expanded their market economy. The open and reform policy achieved the highest average annual GDP growth rate of 9% and helped the country maintain high growth. China's economic growth in recent years has a lot to do with the international trading and direct investment by foreign corporations. China's entry into the WTO dramatically increased their amount of capital and investments due to their aggressive investments with foreign corporations. It is quite amazing that investments in China has been constantly increasing while the direct investments worldwide is decreasing. Moreover, increase in such investments is contributing to China's job creation, as well as, the expansion of international trading. When international economic exchange started between Japan and China in the 1970s, it was in the form of aid for developing countries, hence the collection of the investment was out of the question. It was in the 1990s that Japan started the full-scale investments with China and it was mostly centered in transfer of the production base. Japanese corporations aim was to mass produce goods less expensively using abundant and cheap labor and to sell them to Japan and other countries. The amount of Japan's exports and imports compared with China is increasing every year but the trade deficit has gone into the red. The dollar amount has been decreased from $ 27 billion in 2001 to $ 18 billion in 2003. The problems and damages in the system of justice and administrative confrontation that Japanese corporations are facing are continuously at a stand-still even after China's entry into the WTO. It has been 20 years since Japan's advance in China and during that period, the Japanese corporations brought many changes ranging from exports/imports to direct investment. Although Japan's new corporations tend to be located in the mid-western part of China, rather than the coastal areas, the region itself is not the cause for the confrontation. The problem stems from the Japanese treating the Chinese as if they were Japanese because they look similar due to their Asian ancestry. In reality the Chinese have completely different ways of doing business. Here we will take a look at the international trading and direct investment of Japanese corporations in China and study the conflicts that occurred in business transactions with China through real examples.