• Journal of Ginseng Research
• /
• v.43 no.2
• /
• pp.226-235
• /
• 2019

Background: Panax ginseng is regarded as one of the best compounds for promoting health, and it has been used traditionally as a medicinal herb. Recently, Korean Red Ginseng (RG) has been shown to protect skin from aging and wrinkling; it can also relieve atopic dermatitis and allergy symptoms. This study aimed to evaluate RG's effects on the regeneration of the full-thickness skin wounds in rat. Methods: Full-thickness skin wounds were generated in rats, and then RG was administered either orally or topically. The wound-healing effects of RG were investigated by assessing wound size, mRNA expression patterns of genes related to wound healing, histological staining, and measurements of lipid, moisture, and elasticity in skin tissues. Results: The wound size was smaller, and tissue regeneration rate was faster in the RG-treated group than that in the control group on days 15 and 20 after initiating treatment. On postoperative day 20, skin lipid and moisture content had increased significantly in the RG-treated group. Significant increases in the gene expression levels of transforming growth $factor-{\beta}1$ and vascular endothelial growth factor were found in the RG group during the early stages of wound healing. Matrix metalloproteinase-1 and matrix metalloproteinase-9 showed significant increases in gene expression levels on day 20. Conclusion: The results suggested that RG may promote healing of full-thickness skin wounds in rats. They also provided basic insights into the effects of RG on skin regeneration, supporting its use as a dressing material for wound treatment and its development as a functional food.

• Clinics in Shoulder and Elbow
• /
• v.24 no.3
• /
• pp.147-155
• /
• 2021

Background: This study aimed to evaluate the co-administration effect of atelocollagen combined with hyaluronic acid (HA) injections for treatment of full-thickness rotator cuff tear (RCT). Methods: Eighty patients who underwent arthroscopic rotator cuff repair for full-thickness RCT from March 2018 to November 2019 were enrolled. The patients were randomly allocated to the following groups: combined atelocollagen and HA injection (group I, n=28), only HA injection (group II, n=26), and no injection (group III, n=26). Clinical outcomes were assessed at 3, 6, and 12 months after surgery using the American Shoulder and Elbow Surgeons score, visual analog scale pain score, functional scores (pain visual analog scale, function visual analog score), and range of motion. Magnetic resonance imaging was performed 12 months after surgery to evaluate rotator cuff integrity. Results: Preoperative demographic data and postoperative clinical outcomes did not differ significantly among the three groups (p>0.05). However, in group I, the number of steroid injections after surgery was significantly lower than that in the other groups (p=0.011). The retear rate on follow-up magnetic resonance imaging was significantly higher in group II (9.5%, n=2) and group III (13.6%, n=3) than in group I (0%) (p=0.021). Conclusions: Co-administration of atelocollagen and HA improves healing of the rotator cuff and increases the integrity of the rotator cuff repair site. This study provides encouraging evidence for use of combined atelocollagen-HA injections to treat patients with full-thickness RCT.

• New & Renewable Energy
• /
• v.7 no.4
• /
• pp.30-36
• /
• 2011

The objective of this study is to investigate the effects of the refrigerant charge amount on the performance of a water-to-water ground source heat pump with a variation of compressor speed and the secondary fluid flow rate. The water-to-water ground source heat pump was tested by varying refrigerant charge amount from -40% to 20% of full charge. Compressor speed was changed from 30 Hz to 75 Hz and the secondary fluid flow rate was adjusted from 6 LPM to 14 LPM. For all test conditions, EWTs of an indoor heat exchanger and an outdoor heat exchanger were maintained at standard conditions of ISO 13256-2. The slope of the COP with the variation of charge amount is much steeper at undercharged conditions than that at overcharged conditions. For all compressor speed, the variation of the system performance according to charge amounts showed the similar trends. However, the optimum charge amount of the system increased a little with an increment of compressor speed. When the secondary fluid flow rate decreased, the system was optimized at higher refrigerant charge amount conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.12
• /
• pp.1933-1943
• /
• 2001

A micromechanical model is presented for superplasticity in which heterogeneous microstructures are coupled with deformation behavior. The effects of initial distributions of grain size, and their evolutions on the mechanical properties can be predicted by the model. Alternative stress rate models such as Jaumann rate and rotation incremental rate have been employed to analyze uniaxial loading and simple shear problems and the appropriate modeling was studied on the basis of hypoelasticity and elasto-viscoplasticity. The model has been implemented into finite element software so that full process simulation can be carried out. Tests have been conducted on Ti-6Al-4V alloy and the microstructural features such as grain size, distributions of grain size, and volume fraction of each phase were examined for the materials that were tested at different strain rates. The experimentally observed stress-strain behavior on a range of initial grain size distributions has been shown to be correctly predicted. In addition, the effect of volume fraction of the phases and concurrent grain growth were analyzed. The dependence of failure strain on strain rate has been explained in terms of the change in mechanism of grain growth that occurs with changing strain rate.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.42-50
• /
• 2001

In this paper, the effects of scale formation in engine water jacket upon the thermal durability of engine itself and its component parts were studied. To understand the effect of quality of water, a full load engine endurance test for 50 hours was carried out with not-treated underground water. The followings were found through the tested engine inspection after the endurance test; 1-2 mm thick scale formation in the engine water jacket, valve seat wear, piston top land scuffing, piston pin stick, and cylinder bore scuffing in siamese area. In order to understand the causes of above test results, the heat rejection rate to coolant, the metal surface temperature of combustion chamber, and the oil and exhaust gas temperatures were measured and analyzed. The scale formed in the engine water jacket played a role as thermal insulator. The scale formed in the engine reduced the heat rejection rate to coolant and it caused to increase the metal surface temperature. The reduced heat rejection rate to coolant increased the heat rejection rate to oil and exhaust gas and increased the oil and exhaust gas temperature. Also, the reasons of valve seat wear, piston top land scuffing and cylinder bore scuffing, and piston pin stick quantitatively analyzed in this paper.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.143.1-143.1
• /
• 2011

The objective of this study is to investigate the effects of the refrigerant charge amount on the performance of a water-to-water ground source heat pump with a variation of compressor speed and the secondary fluid flow rate. The water-to-water ground source heat pump was tested by varying refrigerant charge amount from -40% to 20% of full charge. Compressor speed was changed from 30 Hz to 75 Hz, and the secondary fluid flow rate was adjusted from 6 LPM to 14 LPM. For all test conditions, EWT of an indoor heat exchanger and an outdoor heat exchanger were maintained at standard conditions of ISO 13256-2. The slope of the COP with the variation of charge amount is much steeper at undercharged conditions than that at overcharged conditions. For all compressor speed, the variation of the system performance according to charge amounts showed the similar trends. However, the optimum charge amount of the system increased a little with an increment of compressor speed. When the secondary fluid flow rate decreased, the system optimized at higher refrigerant charge amount conditions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.1
• /
• pp.83-93
• /
• 2004

Statement of problem : Since the concept of osseointegrated dental implant by $Br{\aa}nemark$ et al was first applied to mandibular full edentulous patients. Recently it is considerated the first treatment option on missing teeth. A common problem associated with dental implant restorations is loosening of screws that retain the prosthesis to the abutment and the abutment to the implant fixture. Purpose : This study is to examine the influence on screw loosening of implant-abutment designs. Material and methods : External hex, cone screw, beveled hex, cam cylinder, cylinder hex by means of evaluating the loosening torques, with respect to a range of tightening torques after repeated loading. Result : 1. Cone screw, beveled hex groups are the highest initial tightening rate and cylinder hex, external hex groups are the lowest initial tightening rate (p < 0.05). 2. Cone screw groups are the highest after repeated loading tightening rate and cylinder hex groups are lowest after repeated loading tightening rate(p < 0.05). 3. Cone screw groups have the highest initial stability and anal stability. 4. All groups are decreased tightening rate after repeated loading.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.15-23
• /
• 2021

This study investigates the presence of the day-of-the-week anomaly in exchange rate for 30 developing countries with free floating exchange rate regimes using daily data from January 2, 2011 to December 31, 2019. First, we apply the GARCH panel to estimate the intraday effect for all the sampled countries. Second, we run poolability test to check whether the coefficients of the GARCH panel are the same for all countries sampled. The result of poolability test rejects the homogeneity assumption. This implies that our sample countries contain heterogeneity. Third, we apply mean-group estimation by averaging the coefficients for all individual GARCH estimations. Fourth, we divided our sample of developing countries into three groups based on capital restriction index for the reason that the effect of monetary policy on the exchange rate depends on the degree of capital account liberalization. The empirical evidence for the return equation suggests that Mondays are connected with lower volatility whereas Thursdays experiences higher return compared to Tuesdays. The lowest estimated coefficient for full sample, group 1 and group 2, is Friday, but for group 2 is Thursday. We find similar result for the volatility equations, which show that Monday returns are lower compared to Tuesday.

• Environmental Analysis Health and Toxicology
• /
• v.31
• /
• pp.23.1-23.6
• /
• 2016

Objectives A stable follow-up participation rate is a very important factor for validity in a cohort study. This study analyzed the factors that affect the participation rate at one hospital-based birth cohort in South Korean. Methods The participants were recruited from the Mothers' and Children's Environmental Health study between 2006 and 2010. The analysis targeted 1751 mothers who participated in a birth cohort. We conducted analyses of general characteristics during pregnancy and those of infants at birth that affect the participation rate of the 6-month follow-up survey. Results The participation rate for the 6-month follow-up survey was 60.4%. The participation rate in the follow-up of the subsequent period decreased within a 5% to 10% range compared to the number of subjects. The participation rate of premature infants was 16.9% lower than that of a full-term infant (52.6% vs. 69.5%). Analysis showed a 16.7% difference between the participation rate of low-birthweight infants in follow-ups (53.7%) and the participation rate of infants with normal weight (70.4%). The participation rate of mothers who were employed during pregnancy was significantly lower for the 6-month follow-up compared to the participation rate of mothers who were unemployed during pregnancy. Conclusions In this study, factors such as premature birth, low-birthweight, and the employment status of the mother during pregnancy affected the participation rate of the follow-up survey for the birth cohort at six months. A specific strategy is needed to encourage survey participation for the high risk groups in the follow-ups.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.4
• /
• pp.149-157
• /
• 2008

We investigated chlorophyll contents and growth performances of five deciduous hardwood species growing in central temperate zone of Korean forest. Cornus controversa, Fraxinus rhynchophylla, Betula schmidtii, Prunus leveilleana, and Acer mono seedlings were grown under four different light intensity regime (full sunlight, $65{\sim}72%$, $29{\sim}40%$, and, $7{\sim}12%$ of the full sunlight) for the experiment. The chlorophyll contents of all of the species were highest in $7{\sim}12%$ of the full sunlight, while lowest under the full sunlight. The relative growth rate of root collar diameter and height were decreased with increasing shading level except for Acer mono that showed the highest relative growth rate under $29{\sim}40%$ of the full sunlight. Total biomass and root volumes of the seedlings studied decreased as the light intensity decreased with different shade levels. For Acer mono, however, the biomass and root volumes were highest in $29{\sim}40%$ of the full sunlight. The relative growth rate of root comparing to shoot decreased as shading increased, and as a result, the ratio of aboveground to belowground biomass increased. As the shading level increased, specific leaf area (SLA), leaf area ratio (LAR), and leaf weight ratio (LWR) of most species increased.